diff --git a/setup-pterodactyl-wings/README.md b/setup-pterodactyl-wings/README.md
new file mode 100644
index 0000000..80593e0
--- /dev/null
+++ b/setup-pterodactyl-wings/README.md
@@ -0,0 +1,75 @@
+# Setup Pterodactyl Wings
+
+This script helps set up the network configuration and directories required for Pterodactyl Wings. It handles network conflict resolution, proper directory permissions, and container management automatically.
+
+## Prerequisites
+
+- Docker installed and running
+- Root/sudo access
+- wget installed
+
+## Usage
+
+You can run the script directly using wget:
+
+```bash
+bash -c "$(wget -qLO - https://raw.githubusercontent.com/bigbeartechworld/big-bear-scripts/master/setup-pterodactyl-wings/run.sh)" -- <uuid>
+```
+
+Replace `<uuid>` with your server's UUID from the Pterodactyl panel.
+
+Example:
+
+```bash
+bash -c "$(wget -qLO - https://raw.githubusercontent.com/bigbeartechworld/big-bear-scripts/master/setup-pterodactyl-wings/run.sh)" -- 123e4567-e89b-12d3-a456-426614174000
+```
+
+## What the Script Does
+
+1. Creates required Pterodactyl directories with proper permissions
+2. Sets up Docker network `pterodactyl_nw` with proper IPv4/IPv6 configuration
+3. Automatically resolves network conflicts:
+   - Detects conflicting Docker networks
+   - Removes unused conflicting networks
+   - Provides clear instructions if manual intervention is needed
+4. Restarts the pterodactyl-wings container to apply changes
+
+## Network Configuration
+
+The script automatically creates a Docker network with the following specifications:
+
+- Network name: `pterodactyl_nw`
+- IPv4 subnet: Automatically selected from available ranges (172.40-47.0.0/16)
+- IPv4 gateway: Automatically configured based on selected subnet
+- IPv6 subnet: fd00::/64
+- IPv6 gateway: fd00::1
+- Bridge name: pterodactyl0
+
+The script intelligently:
+1. Checks existing Docker networks and system routes for conflicts
+2. Automatically selects an available subnet from a predefined list of private ranges
+3. Reconfigures the network if conflicts are detected
+4. Provides clear status messages during the setup process
+
+## Troubleshooting
+
+If you encounter issues, the script will provide clear error messages and instructions:
+
+1. Network Configuration Issues:
+   - The script will automatically try different subnet ranges
+   - Clear messages show which subnet is being used
+   - Detailed error messages if network creation fails
+
+2. Container Restart Issues:
+   - If the pterodactyl-wings container fails to restart, you'll get instructions for manual restart
+   - Use `docker restart pterodactyl-wings` if needed
+
+Common error messages and solutions:
+
+- "Could not find available subnet": All predefined subnets are in use, contact support
+- "Failed to create network": Check Docker logs and ensure Docker is running properly
+- "Failed to restart pterodactyl-wings container": Ensure the container exists and try restarting manually
+
+## Support
+
+For issues or questions, please open an issue on [BigBearCommunity](https://community.bigbeartechworld.com/).
diff --git a/setup-pterodactyl-wings/run.sh b/setup-pterodactyl-wings/run.sh
new file mode 100644
index 0000000..d0e216c
--- /dev/null
+++ b/setup-pterodactyl-wings/run.sh
@@ -0,0 +1,158 @@
+#!/bin/bash
+
+# Check if exactly one argument (UUID) is provided to the script
+if [ $# -ne 1 ]; then
+   echo "Error: UUID argument is required"
+   echo "Usage: $0 <uuid>"
+   exit 1
+fi
+
+UUID=$1
+
+# Function to check if a subnet is in use
+is_subnet_in_use() {
+    local subnet=$1
+    local network_name=$2
+    local subnet_base=${subnet%/*}
+
+    # Check system routes first
+    while read -r route; do
+        if [[ "$route" == *"$subnet_base"* ]]; then
+            local iface=$(echo "$route" | grep -o "dev [^ ]*" | cut -d' ' -f2)
+            if [ -n "$iface" ] && [ "$iface" != "pterodactyl0" ]; then
+                return 0
+            fi
+        fi
+    done < <(ip route show)
+
+    # Check Docker networks
+    while read -r other_network; do
+        if [ "$other_network" != "$network_name" ]; then
+            if docker network inspect "$other_network" 2>/dev/null | grep -q "\"Subnet\": \"$subnet\""; then
+                return 0
+            fi
+        fi
+    done < <(docker network ls --format "{{.Name}}")
+
+    return 1
+}
+
+# Function to find an available subnet
+find_available_subnet() {
+    local network_name=$1
+    local subnet_ranges=(
+        "172.40.0.0/16"
+        "172.41.0.0/16"
+        "172.42.0.0/16"
+        "172.43.0.0/16"
+        "172.44.0.0/16"
+        "172.45.0.0/16"
+        "172.46.0.0/16"
+        "172.47.0.0/16"
+    )
+
+    for subnet in "${subnet_ranges[@]}"; do
+        if ! is_subnet_in_use "$subnet" "$network_name"; then
+            echo "$subnet"
+            return 0
+        fi
+    done
+
+    return 1
+}
+
+# Function to get gateway for subnet
+get_gateway_for_subnet() {
+    local subnet=$1
+    echo "${subnet%.*}.1"
+}
+
+# Function to create pterodactyl network
+create_pterodactyl_network() {
+    local subnet=$1
+    local gateway=$2
+
+    # Remove existing network if it exists
+    if docker network ls | grep -q "pterodactyl_nw"; then
+        docker network rm pterodactyl_nw || true
+    fi
+
+    # Create the network with error checking
+    if ! docker network create \
+        --driver=bridge \
+        --ipv6 \
+        --subnet="$subnet" \
+        --gateway="$gateway" \
+        --subnet=fd00::/64 \
+        --gateway=fd00::1 \
+        -o "com.docker.network.bridge.name=pterodactyl0" \
+        -o "com.docker.network.bridge.enable_ip_masquerade=true" \
+        -o "com.docker.network.bridge.enable_icc=true" \
+        pterodactyl_nw; then
+        return 1
+    fi
+
+    # Verify network was created
+    if ! docker network ls | grep -q "pterodactyl_nw"; then
+        return 1
+    fi
+
+    return 0
+}
+
+# Main network configuration function
+configure_network() {
+    # Find available subnet
+    local new_subnet
+    new_subnet=$(find_available_subnet "pterodactyl_nw")
+    if [ $? -ne 0 ]; then
+        echo "ERROR: Could not find available subnet"
+        return 1
+    fi
+
+    # Get gateway
+    local new_gateway
+    new_gateway=$(get_gateway_for_subnet "$new_subnet")
+    if [ $? -ne 0 ]; then
+        echo "ERROR: Could not determine gateway"
+        return 1
+    fi
+
+    echo "Using subnet: $new_subnet with gateway: $new_gateway"
+
+    # Create network
+    if ! create_pterodactyl_network "$new_subnet" "$new_gateway"; then
+        echo "ERROR: Failed to create network"
+        return 1
+    fi
+
+    echo "Network created successfully"
+    return 0
+}
+
+# Create required directories
+echo "Creating required directories..."
+mkdir -p "/var/lib/pterodactyl/volumes/$UUID"
+mkdir -p "/tmp/pterodactyl/$UUID"
+mkdir -p "/etc/pterodactyl"
+mkdir -p "/var/log/pterodactyl"
+
+# Configure network
+echo "Configuring network..."
+if ! configure_network; then
+    echo "ERROR: Network configuration failed"
+    exit 1
+fi
+
+# Set ownership
+echo "Setting directory permissions..."
+chown -R 988:988 /tmp/pterodactyl /etc/pterodactyl /var/log/pterodactyl /var/lib/pterodactyl
+
+# Restart pterodactyl-wings container
+echo "Restarting pterodactyl-wings container..."
+if ! docker restart pterodactyl-wings; then
+    echo "WARNING: Failed to restart pterodactyl-wings container"
+    echo "Please restart it manually using: docker restart pterodactyl-wings"
+fi
+
+echo "Setup completed successfully for UUID: $UUID"