## Describe your changes
Supersedes #6767 (same change, moved to an unprefixed branch; review
feedback from there is addressed here).
With lazy connections enabled, a peer is not dialed until on-demand
traffic arrives, so the first request to a peer resolved by name (e.g.
the agent-network reverse-proxy) races — or loses to — the WireGuard
handshake. Activation was previously reactive only: a data-path packet
or an inbound signal.
This adds a proactive, DNS-time trigger. When the local resolver answers
for an overlay name, it now warms the lazy connection to the peer(s) the
answer points at and waits briefly for one to connect before returning
the response — so by the time the client sends its first packet the
tunnel is already up.
- `dns/local`: new `PeerActivator` capability + `SetPeerActivator`
setter (mirrors the existing `PeerConnectivity`/`SetPeerConnectivity`
injection). `ServeDNS` warms on the pre-filter answer, so activating a
lazily-idle peer also lets it survive the disconnected-peer filter.
Warm-up is scoped to match-only (non-authoritative) zones — the
synthesized private-service zones and user-created zones — so plain
peer-name lookups in the account's authoritative peer zone never wake
idle peers. No-op when no activator is wired (lazy off) or the answer
carries no peer IPs. Budget is `NB_DNS_LAZY_WARMUP_TIMEOUT` (default 2s,
parsed once at construction, invalid values logged); on timeout the
answer is returned anyway (never SERVFAIL).
- The resolver-facing interfaces (`PeerActivator`, `PeerConnectivity`)
take `netip.Addr` instead of string IPs; record addresses are extracted
as `netip.Addr` (v4-mapped forms unmapped) and converted to string only
at the `peer.Status` boundary.
- `SetPeerActivator` is part of the `dns.Server` interface (no-op on the
mock), so the engine wires it without a type assertion.
- `client/internal`: a small engine-side adapter (`dnsPeerActivator`)
resolves answer IPs to peers via `Status.PeerStateByIP`, activates them
through `ConnMgr.ActivatePeer` (HA fan-out included), and polls
`PeerStateByIP` until one is connected. The activation dial is tied to
the engine's long-lived context so a handshake that outlasts the
per-query wait still completes in the background. `ConnMgr.ActivatePeer`
is safe for concurrent use (the lazy manager pointer is guarded by a
dedicated RWMutex and the manager is internally synchronized), so the
DNS path never contends with network-map processing on `syncMsgMux`.
Scope is overlay-only for free: the trigger lives in the local resolver,
which only answers for NetBird-managed names; public/upstream DNS is
unaffected. Already-connected peers short-circuit, so steady-state DNS
latency is unchanged.
## Issue ticket number and link
N/A — follow-up to the lazy-connection rollout; fixes the agent-network
cold-start observed in the e2e (proxy peer stuck disconnected until
traffic).
### Checklist
- [x] Is it a bug fix
- [ ] Is a typo/documentation fix
- [ ] Is a feature enhancement
- [ ] It is a refactor
- [x] Created tests that fail without the change (if possible)
- [x] This change does **not** modify the public API, gRPC protocols,
functionality behavior, CLI / service flags, or introduce a new feature
— **OR** I have discussed it with the NetBird team beforehand (link the
issue / Slack thread in the description). See
[CONTRIBUTING.md](https://github.com/netbirdio/netbird/blob/main/CONTRIBUTING.md#discuss-changes-with-the-netbird-team-first).
> By submitting this pull request, you confirm that you have read and
agree to the terms of the [Contributor License
Agreement](https://github.com/netbirdio/netbird/blob/main/CONTRIBUTOR_LICENSE_AGREEMENT.md).
## Documentation
Select exactly one:
- [ ] I added/updated documentation for this change
- [x] Documentation is **not needed** for this change (explain why)
Internal client behavior; the only knob is the optional
`NB_DNS_LAZY_WARMUP_TIMEOUT` tuning env var with a safe default.
### Docs PR URL (required if "docs added" is checked)
Paste the PR link from https://github.com/netbirdio/docs here:
https://github.com/netbirdio/docs/pull/__
## Tests
- `dns/local`: warm-up invokes the activator with the answer's peer
address in match-only zones; authoritative-zone answers never trigger
warm-up; no-activator path unchanged; no-answer queries don't invoke the
activator; `NB_DNS_LAZY_WARMUP_TIMEOUT` parsing
(valid/invalid/non-positive); `extractRecordAddr` unmaps v4-mapped
record data.
- `client/internal`: `dnsPeerActivator` skips
connected/unknown/conn-less peers with no wait, returns as soon as a
pending peer connects, and releases the DNS response at the budget when
the peer stays idle; `ConnMgr.ActivatePeer` races the manager lifecycle
cleanly under `-race`.
- Agent-network e2e green on this change (with lazy connections
enabled): https://github.com/netbirdio/netbird/actions/runs/29891467544
* [client] Index peer tunnel IPs for O(1) PeerStateByIP lookup
Replace the linear scan over all peers with an ipToKey map maintained
by AddPeer/RemovePeer, covering both IPv4 and IPv6 tunnel addresses.
Offline peers are intentionally no longer resolvable by IP: only active
peers can carry traffic, so IdentityForIP and the DNS disconnected-peer
filter now treat them as unknown, same as foreign IPs.
Skip the DNS answer filter for single-record responses; dropping the
only answer was always restored by the empty-answer escape hatch, so
the fast path is behavior-neutral.
* Ensure `ipToKey` entries are only removed if they match the peer being deleted, preventing accidental removal of unrelated mappings.
Adds a new "private" service mode for the reverse proxy: services reachable exclusively over the embedded WireGuard tunnel, gated by per-peer group membership instead of operator auth schemes.
Wire contract
- ProxyMapping.private (field 13): the proxy MUST call ValidateTunnelPeer and fail closed; operator schemes are bypassed.
- ProxyCapabilities.private (4) + supports_private_service (5): capability gate. Management never streams private mappings to proxies that don't claim the capability; the broadcast path applies the same filter via filterMappingsForProxy.
- ValidateTunnelPeer RPC: resolves an inbound tunnel IP to a peer, checks the peer's groups against service.AccessGroups, and mints a session JWT on success. checkPeerGroupAccess fails closed when a private service has empty AccessGroups.
- ValidateSession/ValidateTunnelPeer responses now carry peer_group_ids + peer_group_names so the proxy can authorise policy-aware middlewares without an extra management round-trip.
- ProxyInboundListener + SendStatusUpdate.inbound_listener: per-account inbound listener state surfaced to dashboards.
- PathTargetOptions.direct_upstream (11): bypass the embedded NetBird client and dial the target via the proxy host's network stack for upstreams reachable without WireGuard.
Data model
- Service.Private (bool) + Service.AccessGroups ([]string, JSON- serialised). Validate() rejects bearer auth on private services. Copy() deep-copies AccessGroups. pgx getServices loads the columns.
- DomainConfig.Private threaded into the proxy auth middleware. Request handler routes private services through forwardWithTunnelPeer and returns 403 on validation failure.
- Account-level SynthesizePrivateServiceZones (synthetic DNS) and injectPrivateServicePolicies (synthetic ACL) gate on len(svc.AccessGroups) > 0.
Proxy
- /netbird proxy --private (embedded mode) flag; Config.Private in proxy/lifecycle.go.
- Per-account inbound listener (proxy/inbound.go) binding HTTP/HTTPS on the embedded NetBird client's WireGuard tunnel netstack.
- proxy/internal/auth/tunnel_cache: ValidateTunnelPeer response cache with single-flight de-duplication and per-account eviction.
- Local peerstore short-circuit: when the inbound IP isn't in the account roster, deny fast without an RPC.
- proxy/server.go reports SupportsPrivateService=true and redacts the full ProxyMapping JSON from info logs (auth_token + header-auth hashed values now only at debug level).
Identity forwarding
- ValidateSessionJWT returns user_id, email, method, groups, group_names. sessionkey.Claims carries Email + Groups + GroupNames so the proxy can stamp identity onto upstream requests without an extra management round-trip on every cookie-bearing request.
- CapturedData carries userEmail / userGroups / userGroupNames; the proxy stamps X-NetBird-User and X-NetBird-Groups on r.Out from the authenticated identity (strips client-supplied values first to prevent spoofing).
- AccessLog.UserGroups: access-log enrichment captures the user's group memberships at write time so the dashboard can render group context without reverse-resolving stale memberships.
OpenAPI/dashboard surface
- ReverseProxyService gains private + access_groups; ReverseProxyCluster gains private + supports_private. ReverseProxyTarget target_type enum gains "cluster". ServiceTargetOptions gains direct_upstream. ProxyAccessLog gains user_groups.
* Fix DNS probe thread safety and avoid blocking engine sync
Refactor ProbeAvailability to prevent blocking the engine's sync mutex
during slow DNS probes. The probe now derives its context from the
server's own context (s.ctx) instead of accepting one from the caller,
and uses a mutex to ensure only one probe runs at a time — new calls
cancel the previous probe before starting. Also fixes a data race in
Stop() when accessing probeCancel without the probe mutex.
* Ensure DNS probe thread safety by locking critical sections
Add proper locking to prevent data races when accessing shared resources during DNS probe execution and Stop(). Update handlers snapshot logic to avoid conflicts with concurrent writers.
* Rename context and remove redundant cancellation
* Cancel first and lock
* Add locking to ensure thread safety when reactivating upstream servers
Per RFC 4592 section 2.2.1, wildcards should only match when the queried
name does not exist in the zone. Previously, if host.example.com had an
A record and *.example.com had an AAAA record, querying AAAA for
host.example.com would incorrectly return the wildcard AAAA instead of
NODATA.
Now the resolver checks if the domain exists (with any record type)
before falling back to wildcard matching, returning proper NODATA
responses for existing names without the requested record type.
* **New Features**
* Wildcard DNS fallback for eligible query types (excluding NS/SOA): attempts wildcard records when no exact match, rewrites wildcard names back to the original query, and rotates responses; preserves CNAME resolution.
* **Tests**
* Vastly expanded coverage for wildcard behaviors, precedence, multi-record round‑robin, multi-type chains, multi-hop and cross-zone scenarios, and edge cases (NXDOMAIN/NODATA, fallthrough).
* **Chores**
* CI lint config updated to ignore an additional codespell entry.
