starred/unpoller-unpoller-3
1
0
Fork 0
mirror of https://github.com/unpoller/unpoller.git synced 2026-04-05 08:54:00 -04:00
Code Issues Packages Projects Releases Wiki Activity

fixes

Browse Source
This commit is contained in:
davidnewhall2
2019-12-20 02:44:53 -08:00
parent 17e7c8edb3
commit de16ba2399
12 changed files with 313 additions and 247 deletions
Download Patch File Download Diff File Expand all files Collapse all files

122
examples/up.conf.example
View File

@@ -1,75 +1,95 @@
# UniFi Poller primary configuration file. TOML FORMAT #
# commented lines are defaults, uncomment to change. #
########################################################
[poller]
# Turns on line numbers, microsecond logging, and a per-device log.
# The default is false, but I personally leave this on at home (four devices).
# This may be noisy if you have a lot of devices. It adds one line per device.
debug = false
# Turns on line numbers, microsecond logging, and a per-device log.
# The default is false, but I personally leave this on at home (four devices).
# This may be noisy if you have a lot of devices. It adds one line per device.
debug = false
# Turns off per-interval logs. Only startup and error logs will be emitted.
# Recommend enabling debug with this setting for better error logging.
quiet = false
# Turns off per-interval logs. Only startup and error logs will be emitted.
# Recommend enabling debug with this setting for better error logging.
quiet = false
# Load dynamic plugins. Advanced use; only sample mysql plugin provided by default.
plugins = []
# Load dynamic plugins. Advanced use; only sample mysql plugin provided by default.
plugins = []
#### OUTPUTS
# If you don't use an output, you can disable it.
[prometheus]
disable = false
# This controls on which ip and port /metrics is exported when mode is "prometheus".
# This has no effect in other modes. Must contain a colon and port.
http_listen = "0.0.0.0:9130"
report_errors = false
disable = false
# This controls on which ip and port /metrics is exported when mode is "prometheus".
# This has no effect in other modes. Must contain a colon and port.
http_listen = "0.0.0.0:9130"
report_errors = false
[influxdb]
disable = false
# InfluxDB does not require auth by default, so the user/password are probably unimportant.
url = "http://127.0.0.1:8086"
user = "unifi"
pass = "unifi"
# Be sure to create this database.
db = "unifi"
# If your InfluxDB uses a valid SSL cert, set this to true.
verify_ssl = false
# The UniFi Controller only updates traffic stats about every 30 seconds.
# Setting this to something lower may lead to "zeros" in your data.
# If you're getting zeros now, set this to "1m"
interval = "30s"
disable = false
# InfluxDB does not require auth by default, so the user/password are probably unimportant.
url = "http://127.0.0.1:8086"
user = "unifipoller"
pass = "unifipoller"
# Be sure to create this database.
db = "unifi"
# If your InfluxDB uses a valid SSL cert, set this to true.
verify_ssl = false
# The UniFi Controller only updates traffic stats about every 30 seconds.
# Setting this to something lower may lead to "zeros" in your data.
# If you're getting zeros now, set this to "1m"
interval = "30s"
#### INPUTS
[unifi]
disable = false
# Setting this to true and providing default credentials allows you to skip
# configuring controllers in this config file. Instead you configure them in
# your prometheus.yml config. Prometheus then sends the controller URL to
# unifi-poller when it performs the scrape. This is useful if you have many,
# or changing controllers. Most people can leave this off. See wiki for more.
dynamic = false
# The following section contains the default credentials/configuration for any
# dynamic controller (see above section), or the primary controller if you do not
# provide one and dynamic is disabled. In other words, you can just add your
# controller here and delete the following section. Either works.
[unifi.defaults]
name = "https://127.0.0.1:8443"
url = "https://127.0.0.1:8443"
user = "unifipoller"
pass = "unifipoller"
sites = ["all"]
save_ids = false
save_sites = true
verify_ssl = false
# You may repeat the following section to poll additional controllers.
[[unifi.controller]]
# Friendly name used in dashboards. Uses URL if left empty.
name = ""
# Friendly name used in dashboards. Uses URL if left empty; which is fine.
# Avoid changing this later because it will live forever in your database.
name = ""
url = "https://127.0.0.1:8443"
# Make a read-only user in the UniFi Admin Settings.
user = "influx"
# You may also set env variable UNIFI_PASSWORD instead of putting this in the config.
pass = "4BB9345C-2341-48D7-99F5-E01B583FF77F"
url = "https://127.0.0.1:8443"
# Make a read-only user in the UniFi Admin Settings.
user = "unifipoller"
# You may also set env variable UNIFI_PASSWORD instead of putting this in the config.
pass = "4BB9345C-2341-48D7-99F5-E01B583FF77F"
# If the controller has more than one site, specify which sites to poll here.
# Set this to ["default"] to poll only the first site on the controller.
# A setting of ["all"] will poll all sites; this works if you only have 1 site too.
sites = ["all"]
# If the controller has more than one site, specify which sites to poll here.
# Set this to ["default"] to poll only the first site on the controller.
# A setting of ["all"] will poll all sites; this works if you only have 1 site too.
sites = ["all"]
# Enable collection of Intrusion Detection System Data (InfluxDB only).
# Only useful if IDS or IPS are enabled on one of the sites.
save_ids = false
# Enable collection of Intrusion Detection System Data (InfluxDB only).
# Only useful if IDS or IPS are enabled on one of the sites.
save_ids = false
# Enable collection of site data. This data powers the Network Sites dashboard.
# It's not valuable to everyone and setting this to false will save resources.
save_sites = true
# Enable collection of site data. This data powers the Network Sites dashboard.
# It's not valuable to everyone and setting this to false will save resources.
save_sites = true
# If your UniFi controller has a valid SSL certificate (like lets encrypt),
# you can enable this option to validate it. Otherwise, any SSL certificate is
# valid. If you don't know if you have a valid SSL cert, then you don't have one.
verify_ssl = false
# If your UniFi controller has a valid SSL certificate (like lets encrypt),
# you can enable this option to validate it. Otherwise, any SSL certificate is
# valid. If you don't know if you have a valid SSL cert, then you don't have one.
verify_ssl = false