Strict mode (NB_PQ_MLKEM_STRICT, default off) closes the initial PQ-vulnerable
window (NET-1408): when enabled, conn.presharedKey programs a per-conn random
sentinel PSK until the ML-KEM exchange derives the real one, so no session can form
on a non-PQ key (the real PSK is pushed via SetPresharedKey once it converges).
Default stays opportunistic.
Also surface PQ status: the peer 'Quantum resistance' flag (RosenpassEnabled) is now
true when an ML-KEM PSK has been derived for the peer, not only for Rosenpass.
The idle-gate reads LastActivities, which only tracks per-peer data in userspace;
in kernel mode it is empty, so the gate treated every kernel peer as idle and
disabled data-path rotation entirely. Detect the bind via IsUserspaceBind and, in
kernel mode, report zero activity age (always 'active') so rotation runs on every
rekey. Lazy back-to-idle is already limited in kernel; the eBPF WG-activity
detection will later supply a real signal that excludes handshake/pqkem traffic.
Replace the raw SHA-256 concat combiner with HKDF-SHA256 (crypto/hkdf, Go 1.24):
IKM = ML-KEM_ss || X25519_ss (draft-ietf-tls-ecdhe-mlkem order), salt = the
domain-separation label, info = full transcript (offer || answer) || canonicalised
peer identities. Keeps the transcript + identity binding while using a proper KDF.
- Add a trace slog level (NB_PQ_MLKEM_LOG_LEVEL=trace) and move the verbose
per-exchange lifecycle logs (offer/answer/PSK/ack/rotation) to it, so debug
stays quiet and troubleshooting is opt-in.
- Stop logging the raw preshared key; drop the temporary pqkem-dbg OnRemoteOffer/
OnRemoteAnswer probes.
- Demote the per-handshake conn log to trace.
Source OnDataPathRekeyed from the WGWatcher's per-handshake callback
(onWGCheckSuccess), which fires only on a fresh handshake, and OnDataPathDown
from the handshake-timeout path. A fresh handshake clocks the next chained
KEM exchange pushed over the data-path UDP transport.
Learn the peer's data-path endpoint from the signalling offer/answer: its WG
overlay IP combined with the advertised pq UDP port (SetRemotePort -> AddPeer).
Registering here is safe before the tunnel is up because sends only ever fire
once it is (clocked by OnDataPathRekeyed). RemovePeer is wired at peer teardown
(engine.removePeer), not on transient disconnect.
We clock the next Offer initiation to the OnDataPathRekeyed, so we have 2 minutes
ahead of us to do our attempts and stuff before to give up.
On failure, we will know because we will not receive a new answer.. but more importantly
the wg handshake will fail :D
Define OnDataPathRekeyed event to transition from control plane path to data plane path over the WG tunnel.
Keep confirm ALWAYS on NEW established WG tunnel (posthandshake with rekeying). We keep an active method
irrelevant of the WG handshake (we might decide that the indirect wg handshake is sufficient in the future).
Optimistic commit on responder(when sending answer), while on initiator we set it on getting the answer
- Have just one manager => one lock
- Session state is needed in driver to => we have it available now.
- Isomorphically align to rosenpass components and functionality
File Role rosenpass equivalent
kem.go primitive pure X25519MLKEM768 crypto.go/handshake
message.go Offer/Answer/Confirm + Encode/Decode messages.go
manager.go Manager stateful, single lock server logic
callbacks.go WGCallbackHandler (seam output) Handler
Transport (interfaccia) seam trasporto pluggable Conn
## Describe your changes
Work on the Terraform provider (terraform-provider-netbird #177–#183)
surfaced places where the agent-network API broke its own contracts or
deviated from the conventions the rest of the management API follows,
forcing client-side workarounds.
Settings reads now follow the settings-endpoint convention: GET always
answers with a JSON object. Before bootstrap it returns the defaults
with an empty cluster/subdomain/endpoint (previously 200 with a JSON
`null` body, while the spec said 404). The settings PUT can bootstrap
the account by carrying a `cluster` — previously the row could only come
into existence through the first provider create, and a settings-first
setup was impossible; a differing cluster on a bootstrapped account is
rejected instead of silently ignored. PUT remains full-state.
The provider PUT schema promised omit-preserves semantics for several
operator-editable fields that the handler never delivered (it builds the
row from the request, like every other update handler). The schema
wording now matches the shipped full-state behavior; only the api_key
(secret) and session keys stay preserved by the manager. Identity
headers are always present in provider responses so an explicitly
cleared value round-trips as an empty string.
The Go REST client gains the full agent-network surface (catalog,
providers, policies, guardrails, budget rules, settings), including a
shim translating the legacy 200+`null` settings body from older servers
into an `IsNotFound` error.
Note for reviewers: the dashboard special-cased the `null` settings
body; it needs a small follow-up for the new defaults response (in
progress).
## Describe your changes
Update wails to v3.0.0-beta.3
## Issue ticket number and link
<!--
Required for anything that changes behavior. Link the issue (or the
validated
discussion it came from) that the NetBird team already agreed on. See
https://github.com/netbirdio/netbird/blob/main/CONTRIBUTING.md#ticket-first-pr-second
-->
## Stack
<!-- branch-stack -->
### Checklist
- [ ] Is it a bug fix
- [ ] Is a typo/documentation fix
- [x] Is a feature enhancement
- [ ] It is a refactor
- [ ] Created tests that fail without the change (if possible)
- [ ] I ran and tested this change locally — I did not rely on CI to
find out whether it works
- [ ] This PR has a single purpose (not a fix + refactor + feature in
one)
- [ ] This change is a trivial fix, **OR** it links an issue the NetBird
team agreed on beforehand. Changes to the public API, gRPC protocols,
functionality behavior, CLI / service flags, or new features always need
that agreement first. See
[CONTRIBUTING.md](https://github.com/netbirdio/netbird/blob/main/CONTRIBUTING.md#ticket-first-pr-second).
> By submitting this pull request, you confirm that you have read and
agree to the terms of the [Contributor License
Agreement](https://github.com/netbirdio/netbird/blob/main/CONTRIBUTOR_LICENSE_AGREEMENT.md).
## Documentation
Select exactly one:
- [ ] I added/updated documentation for this change
- [x] Documentation is **not needed** for this change (explain why)
### Docs PR URL (required if "docs added" is checked)
Paste the PR link from https://github.com/netbirdio/docs here:
https://github.com/netbirdio/docs/pull/__
<!-- This is an auto-generated comment: release notes by coderabbit.ai
-->
## Summary by CodeRabbit
* **Chores**
* Updated the application framework dependency to a newer beta release
for improved compatibility and stability.
<!-- end of auto-generated comment: release notes by coderabbit.ai -->
The Android binding never recorded which account a profile belongs to,
so every interactive login and every session extend went to the IdP with
no login_hint. With nothing to go on the IdP picks an account itself,
which on a session extend means re-authenticating an account the profile
is already signed in with.
Store the email the PKCE flow already parses out of the ID token, and
pass it back as the hint on later flows. An empty hint stays meaningful:
a fresh profile, or one that was logged out, deliberately leaves the
choice to the IdP, which is how a profile changes accounts. Logout
clears the stored email for that reason — while it is on disk it would
steer the next login straight back into the account just logged out of.
The email is keyed off the profile's config path rather than the active
profile: Auth.login runs in a goroutine, so the active profile can
change under a flow already in flight. It lands in
<profile>.account.json, not the <profile>.state.json desktop uses for
the same data — there the email and the engine's state manager sit in
different directories, but on Android both resolve under files/, and the
state manager rewrites the whole file from its own keys.
## Describe your changes
## Issue ticket number and link
## Stack
<!-- branch-stack -->
### Checklist
- [x] Is it a bug fix
- [ ] Is a typo/documentation fix
- [ ] Is a feature enhancement
- [ ] It is a refactor
- [ ] Created tests that fail without the change (if possible)
- [ ] This change does **not** modify the public API, gRPC protocols,
functionality behavior, CLI / service flags, or introduce a new feature
— **OR** I have discussed it with the NetBird team beforehand (link the
issue / Slack thread in the description). See
[CONTRIBUTING.md](https://github.com/netbirdio/netbird/blob/main/CONTRIBUTING.md#discuss-changes-with-the-netbird-team-first).
> By submitting this pull request, you confirm that you have read and
agree to the terms of the [Contributor License
Agreement](https://github.com/netbirdio/netbird/blob/main/CONTRIBUTOR_LICENSE_AGREEMENT.md).
## Documentation
Select exactly one:
- [ ] I added/updated documentation for this change
- [x] Documentation is **not needed** for this change (explain why)
### Docs PR URL (required if "docs added" is checked)
Paste the PR link from https://github.com/netbirdio/docs here:
https://github.com/netbirdio/docs/pull/__
<!-- This is an auto-generated comment: release notes by coderabbit.ai
-->
## Summary by CodeRabbit
* **New Features**
* Added account email and active-status details to Android profile
information.
* Improved SSO sign-in and session renewal by restoring the previously
used account as a login hint.
* Added Android-specific profile email persistence with automatic
cleanup on logout.
* **Bug Fixes**
* Profile email persistence failures now generate warnings without
blocking login or logout.
* Improved handling of missing or unreadable account data and repeated
logout cleanup.
* **Tests**
* Added coverage for account-file naming, email persistence, and logout
behavior.
<!-- end of auto-generated comment: release notes by coderabbit.ai -->
## Describe your changes
NewAuth builds a fresh in-memory configuration on every call, which
means a new WireGuard key each time. The peer registers under that key
and the key is written out, so any peer registered by an earlier call is
orphaned on the server — a client that enrols twice leaves two entries
and owns neither.
It also breaks the enrol-then-run sequence. `RunWithoutLogin` reloads
the configuration from disk through `UpdateOrCreateConfig`, so the
identity that registered is not necessarily the identity that runs, and
the management stream rejects it:
```
failed to login to Management Service: rpc error: code = PermissionDenied
desc = no peer auth method provided, please use a setup key or interactive SSO login
```
followed by a panic in `ConnectClient.run`.
### How it was found
Embedding the Android client in an application that enrols with a setup
key and then runs. Eight orphaned peers accumulated on a self-hosted
management server before the cause was clear, because every restart
registered a new one.
### The change
`NewAuth` passes `ConfigPath` and uses `UpdateOrCreateConfig`, so an
existing configuration is reused and one is only created when absent. A
caller wanting a fresh identity can delete the file — which is what
"forget this account" already does.
### Test
`TestNewAuth_ReusesPersistedIdentity` fails on the current code:
```
--- FAIL: TestNewAuth_ReusesPersistedIdentity (0.00s)
login_test.go:33: private key changed between calls: a second enrolment would orphan the peer registered by the first
```
and passes with the fix. `TestNewAuth_CreatesConfigWhenAbsent` covers
the first-enrolment path being unchanged. Both run in `client/android`
on Linux.
Per CONTRIBUTING, opening directly as a bug fix rather than raising an
issue first.
## Issue ticket number and link
[NET-1465](https://linear.app/netbird/issue/NET-1465/agent-network-rest-api-settings-defaults-bootstrap-via-put-provider)
## Stack
<!-- branch-stack -->
### Checklist
- [x] Is it a bug fix
- [ ] Is a typo/documentation fix
- [ ] Is a feature enhancement
- [ ] It is a refactor
- [ ] Created tests that fail without the change (if possible)
- [ ] I ran and tested this change locally — I did not rely on CI to
find out whether it works
- [ ] This PR has a single purpose (not a fix + refactor + feature in
one)
- [ ] This change is a trivial fix, **OR** it links an issue the NetBird
team agreed on beforehand. Changes to the public API, gRPC protocols,
functionality behavior, CLI / service flags, or new features always need
that agreement first. See
[CONTRIBUTING.md](https://github.com/netbirdio/netbird/blob/main/CONTRIBUTING.md#ticket-first-pr-second).
> By submitting this pull request, you confirm that you have read and
agree to the terms of the [Contributor License
Agreement](https://github.com/netbirdio/netbird/blob/main/CONTRIBUTOR_LICENSE_AGREEMENT.md).
## Documentation
Select exactly one:
- [ ] I added/updated documentation for this change
- [x] Documentation is **not needed** for this change (explain why): the
API reference is generated from the OpenAPI spec, which this PR updates
in-repo.
### Docs PR URL (required if "docs added" is checked)
Paste the PR link from https://github.com/netbirdio/docs here:
https://github.com/netbirdio/docs/pull/__
Co-authored-by: Zoltan Papp <zoltan.pmail@gmail.com>
## Describe your changes
Pull fresh TUN settings on Android rebuild instead of push
The Android TUN rebuild consumed state pushed through notifications and
a Java-side snapshot, and both sources were unreliable. The DNS
search-domain notifier fired OnNetworkChanged with an empty string,
which the rebuild handler treated as the new route list, so any search
domain change rebuilt the TUN with zero routes and cut all tunnel
traffic. The rebuild also reused the search domains cached at the last
establish, so search domain updates never reached the TUN at runtime.
Make the notification a pure trigger and let the Java side pull a fresh
snapshot instead. Expose GetTunSettings on the Android SDK client: it
returns the current TUN route ranges, derived on demand by the route
manager from the client routes, the exit-node selection and the fake IP
blocks, together with the DNS search domains. The route notifier keeps
only its last-announced baseline to suppress triggers for unchanged
syncs; the TUN route state is owned by the route manager. SearchDomains
now locks the DNS server mutex since the pull arrives from a Java
thread.
Requires the matching android-client change that switches recreateTUN to
the pull API.
## Issue ticket number and link
## Stack
<!-- branch-stack -->
### Checklist
- [x] Is it a bug fix
- [ ] Is a typo/documentation fix
- [ ] Is a feature enhancement
- [ ] It is a refactor
- [ ] Created tests that fail without the change (if possible)
- [ ] This change does **not** modify the public API, gRPC protocols,
functionality behavior, CLI / service flags, or introduce a new feature
— **OR** I have discussed it with the NetBird team beforehand (link the
issue / Slack thread in the description). See
[CONTRIBUTING.md](https://github.com/netbirdio/netbird/blob/main/CONTRIBUTING.md#discuss-changes-with-the-netbird-team-first).
> By submitting this pull request, you confirm that you have read and
agree to the terms of the [Contributor License
Agreement](https://github.com/netbirdio/netbird/blob/main/CONTRIBUTOR_LICENSE_AGREEMENT.md).
## Documentation
Select exactly one:
- [ ] I added/updated documentation for this change
- [x] Documentation is **not needed** for this change (explain why)
### Docs PR URL (required if "docs added" is checked)
Paste the PR link from https://github.com/netbirdio/docs here:
https://github.com/netbirdio/docs/pull/__
<!-- This is an auto-generated comment: release notes by coderabbit.ai
-->
## Summary by CodeRabbit
- **New Features**
- Added access to current TUN route ranges and DNS search domains.
- TUN settings are returned in a mobile-friendly format for easier
integration.
- **Improvements**
- Route changes are detected and synchronized more reliably.
- Current routing information now reflects active routes, including
supported fake-IP ranges.
- Simplified network initialization for more consistent startup
behavior.
- **API Changes**
- Removed the obsolete network-map retrieval method from the management
client interface.
<!-- end of auto-generated comment: release notes by coderabbit.ai -->
## Describe your changes
Extend CI tag list with Android and iOS
## Issue ticket number and link
<!--
Required for anything that changes behavior. Link the issue (or the
validated
discussion it came from) that the NetBird team already agreed on. See
https://github.com/netbirdio/netbird/blob/main/CONTRIBUTING.md#ticket-first-pr-second
-->
## Stack
<!-- branch-stack -->
### Checklist
- [ ] Is it a bug fix
- [ ] Is a typo/documentation fix
- [x] Is a feature enhancement
- [ ] It is a refactor
- [ ] Created tests that fail without the change (if possible)
- [ ] I ran and tested this change locally — I did not rely on CI to
find out whether it works
- [ ] This PR has a single purpose (not a fix + refactor + feature in
one)
- [ ] This change is a trivial fix, **OR** it links an issue the NetBird
team agreed on beforehand. Changes to the public API, gRPC protocols,
functionality behavior, CLI / service flags, or new features always need
that agreement first. See
[CONTRIBUTING.md](https://github.com/netbirdio/netbird/blob/main/CONTRIBUTING.md#ticket-first-pr-second).
> By submitting this pull request, you confirm that you have read and
agree to the terms of the [Contributor License
Agreement](https://github.com/netbirdio/netbird/blob/main/CONTRIBUTOR_LICENSE_AGREEMENT.md).
## Documentation
Select exactly one:
- [ ] I added/updated documentation for this change
- [x] Documentation is **not needed** for this change (explain why)
### Docs PR URL (required if "docs added" is checked)
Paste the PR link from https://github.com/netbirdio/docs here:
https://github.com/netbirdio/docs/pull/__
<!-- This is an auto-generated comment: release notes by coderabbit.ai
-->
## Summary by CodeRabbit
* **Chores**
* Updated pull request title validation to accept `android` and `ios`
tags.
<!-- end of auto-generated comment: release notes by coderabbit.ai -->
