Strict mode (NB_PQ_MLKEM_STRICT, default off) closes the initial PQ-vulnerable
window (NET-1408): when enabled, conn.presharedKey programs a per-conn random
sentinel PSK until the ML-KEM exchange derives the real one, so no session can form
on a non-PQ key (the real PSK is pushed via SetPresharedKey once it converges).
Default stays opportunistic.
Also surface PQ status: the peer 'Quantum resistance' flag (RosenpassEnabled) is now
true when an ML-KEM PSK has been derived for the peer, not only for Rosenpass.
The idle-gate reads LastActivities, which only tracks per-peer data in userspace;
in kernel mode it is empty, so the gate treated every kernel peer as idle and
disabled data-path rotation entirely. Detect the bind via IsUserspaceBind and, in
kernel mode, report zero activity age (always 'active') so rotation runs on every
rekey. Lazy back-to-idle is already limited in kernel; the eBPF WG-activity
detection will later supply a real signal that excludes handshake/pqkem traffic.
Replace the raw SHA-256 concat combiner with HKDF-SHA256 (crypto/hkdf, Go 1.24):
IKM = ML-KEM_ss || X25519_ss (draft-ietf-tls-ecdhe-mlkem order), salt = the
domain-separation label, info = full transcript (offer || answer) || canonicalised
peer identities. Keeps the transcript + identity binding while using a proper KDF.
- Add a trace slog level (NB_PQ_MLKEM_LOG_LEVEL=trace) and move the verbose
per-exchange lifecycle logs (offer/answer/PSK/ack/rotation) to it, so debug
stays quiet and troubleshooting is opt-in.
- Stop logging the raw preshared key; drop the temporary pqkem-dbg OnRemoteOffer/
OnRemoteAnswer probes.
- Demote the per-handshake conn log to trace.
Source OnDataPathRekeyed from the WGWatcher's per-handshake callback
(onWGCheckSuccess), which fires only on a fresh handshake, and OnDataPathDown
from the handshake-timeout path. A fresh handshake clocks the next chained
KEM exchange pushed over the data-path UDP transport.
Learn the peer's data-path endpoint from the signalling offer/answer: its WG
overlay IP combined with the advertised pq UDP port (SetRemotePort -> AddPeer).
Registering here is safe before the tunnel is up because sends only ever fire
once it is (clocked by OnDataPathRekeyed). RemovePeer is wired at peer teardown
(engine.removePeer), not on transient disconnect.
We clock the next Offer initiation to the OnDataPathRekeyed, so we have 2 minutes
ahead of us to do our attempts and stuff before to give up.
On failure, we will know because we will not receive a new answer.. but more importantly
the wg handshake will fail :D
Define OnDataPathRekeyed event to transition from control plane path to data plane path over the WG tunnel.
Keep confirm ALWAYS on NEW established WG tunnel (posthandshake with rekeying). We keep an active method
irrelevant of the WG handshake (we might decide that the indirect wg handshake is sufficient in the future).
Optimistic commit on responder(when sending answer), while on initiator we set it on getting the answer
- Have just one manager => one lock
- Session state is needed in driver to => we have it available now.
- Isomorphically align to rosenpass components and functionality
File Role rosenpass equivalent
kem.go primitive pure X25519MLKEM768 crypto.go/handshake
message.go Offer/Answer/Confirm + Encode/Decode messages.go
manager.go Manager stateful, single lock server logic
callbacks.go WGCallbackHandler (seam output) Handler
Transport (interfaccia) seam trasporto pluggable Conn
## Describe your changes
Pull fresh TUN settings on Android rebuild instead of push
The Android TUN rebuild consumed state pushed through notifications and
a Java-side snapshot, and both sources were unreliable. The DNS
search-domain notifier fired OnNetworkChanged with an empty string,
which the rebuild handler treated as the new route list, so any search
domain change rebuilt the TUN with zero routes and cut all tunnel
traffic. The rebuild also reused the search domains cached at the last
establish, so search domain updates never reached the TUN at runtime.
Make the notification a pure trigger and let the Java side pull a fresh
snapshot instead. Expose GetTunSettings on the Android SDK client: it
returns the current TUN route ranges, derived on demand by the route
manager from the client routes, the exit-node selection and the fake IP
blocks, together with the DNS search domains. The route notifier keeps
only its last-announced baseline to suppress triggers for unchanged
syncs; the TUN route state is owned by the route manager. SearchDomains
now locks the DNS server mutex since the pull arrives from a Java
thread.
Requires the matching android-client change that switches recreateTUN to
the pull API.
## Issue ticket number and link
## Stack
<!-- branch-stack -->
### Checklist
- [x] Is it a bug fix
- [ ] Is a typo/documentation fix
- [ ] Is a feature enhancement
- [ ] It is a refactor
- [ ] Created tests that fail without the change (if possible)
- [ ] This change does **not** modify the public API, gRPC protocols,
functionality behavior, CLI / service flags, or introduce a new feature
— **OR** I have discussed it with the NetBird team beforehand (link the
issue / Slack thread in the description). See
[CONTRIBUTING.md](https://github.com/netbirdio/netbird/blob/main/CONTRIBUTING.md#discuss-changes-with-the-netbird-team-first).
> By submitting this pull request, you confirm that you have read and
agree to the terms of the [Contributor License
Agreement](https://github.com/netbirdio/netbird/blob/main/CONTRIBUTOR_LICENSE_AGREEMENT.md).
## Documentation
Select exactly one:
- [ ] I added/updated documentation for this change
- [x] Documentation is **not needed** for this change (explain why)
### Docs PR URL (required if "docs added" is checked)
Paste the PR link from https://github.com/netbirdio/docs here:
https://github.com/netbirdio/docs/pull/__
<!-- This is an auto-generated comment: release notes by coderabbit.ai
-->
## Summary by CodeRabbit
- **New Features**
- Added access to current TUN route ranges and DNS search domains.
- TUN settings are returned in a mobile-friendly format for easier
integration.
- **Improvements**
- Route changes are detected and synchronized more reliably.
- Current routing information now reflects active routes, including
supported fake-IP ranges.
- Simplified network initialization for more consistent startup
behavior.
- **API Changes**
- Removed the obsolete network-map retrieval method from the management
client interface.
<!-- end of auto-generated comment: release notes by coderabbit.ai -->
## Describe your changes
In unattended installs/updates there may be no logged-in user, so
there's no context to start the GUI (nor anyone to see it).
The bug is the GUI being started in the wrong user context / inheriting
the wrong `$HOME` (OS mechanics aside).
Today the GUI is started by a per-user LaunchAgent, i.e. on behalf of
the user who logs in — no login ⇒ no GUI.
The patch aligns to this: it launches the GUI on behalf of the logged-in
console user if one exists, otherwise it delegates the launch to the
per-user LaunchAgent at next login.
Additionally it logs when default UI settings are applied.
Note (small caveat): the LaunchAgent auto-starts the GUI at login only
once it's been registered — which happens on the first GUI launch in the
user's context. On an MDM/unattended fresh install done with no user
logged in (where the user has never run the GUI before), they may need
to start it manually once; it self-registers from then on.
## Issue ticket number and link
No public issue — reported internally (community report on Slack: macOS
advanced-view + onboarding reset on every update, esp. via MDM/Munki).
Buggy line on main:
dd2bdc0de3/release_files/darwin_pkg/postinstall (L33)
## Stack
<!-- branch-stack -->
### Checklist
- [x] Is it a bug fix
- [ ] Is a typo/documentation fix
- [ ] Is a feature enhancement
- [ ] It is a refactor
- [ ] Created tests that fail without the change (if possible)
> By submitting this pull request, you confirm that you have read and
agree to the terms of the [Contributor License
Agreement](https://github.com/netbirdio/netbird/blob/main/CONTRIBUTOR_LICENSE_AGREEMENT.md).
## Documentation
Select exactly one:
- [ ] I added/updated documentation for this change
- [x] Documentation is **not needed** for this change (explain why)
Internal macOS installer / GUI-launch behavior. No public API, CLI, or
configuration change: the fix only changes the user context the desktop
GUI is launched in after a pkg install/update.
### Docs PR URL (required if "docs added" is checked)
Paste the PR link from https://github.com/netbirdio/docs here:
N/A
<!-- codesmith:footer -->
---
<a
href="https://app.blacksmith.sh/netbirdio/codesmith/netbird/pr/6962"><picture><source
media="(prefers-color-scheme: dark)"
srcset="https://pr-comments-assets.blacksmith.sh/codesmith/view-with-codesmith-dark-v2.svg"><source
media="(prefers-color-scheme: light)"
srcset="https://pr-comments-assets.blacksmith.sh/codesmith/view-with-codesmith-light-v2.svg"><img
alt="View with [code]smith"
src="https://pr-comments-assets.blacksmith.sh/codesmith/view-with-codesmith-dark-v2.svg"></picture></a>
<a
href="https://backend.blacksmith.sh/track/enable-autofix?expires=1787923973&installation_model_id=427504&pr_number=6962&repository=netbirdio%2Fnetbird&return_to=https%3A%2F%2Fgithub.com%2Fnetbirdio%2Fnetbird%2Fpull%2F6962&signature=5226bbc7986fc60eb8b4ab77e98ac17a6534864763fc6407048bcbbb1550394b"><picture><source
media="(prefers-color-scheme: dark)"
srcset="https://pr-comments-assets.blacksmith.sh/codesmith/autofix-with-codesmith-dark.svg"><source
media="(prefers-color-scheme: light)"
srcset="https://pr-comments-assets.blacksmith.sh/codesmith/autofix-with-codesmith-light.svg"><img
alt="Autofix with [code]smith"
src="https://pr-comments-assets.blacksmith.sh/codesmith/autofix-with-codesmith-dark.svg"></picture></a>
<sup>Need help on this PR? Tag <code>@codesmith-bot</code> with what you
need. Autofix is disabled.</sup>
<!-- codesmith:autofix:disabled -->
<!-- /codesmith:footer -->
<!-- This is an auto-generated comment: release notes by coderabbit.ai
-->
## Summary by CodeRabbit
- **Bug Fixes**
- Improved macOS installation and updater UI launching to occur only
when an active, valid GUI console session is detected.
- Prevented UI launches during unattended/system, root, or
login-window-related installs.
- Ensured the app is launched in the correct console-user context, and
skips cleanly when username/UID resolution fails.
- **Improvements**
- Added clearer informational logging when the UI preferences file is
not found and default preferences are used.
<!-- end of auto-generated comment: release notes by coderabbit.ai -->
## Describe your changes
The Android route notifier and the DNS search-domain notifier both
delivered OnNetworkChanged from a fire-and-forget goroutine per update.
Two updates in quick succession could reach the Java side reordered: the
TUN rebuild handler applies them in arrival order and compares against
the last applied parameters, so a stale route set delivered last won as
the final TUN state. This is the same reordering hazard fixed for iOS in
#6454.
Wrap the Android network change listener into the shared tunnelnotifier
FIFO introduced in #6870, the same way RunOniOS does, and deliver both
notifiers synchronously into it. Enqueueing is non-blocking, a single
delivery goroutine preserves order, and calls into Java never overlap.
Also stop hasRouteDiff from sorting the notifier's shared route slices
in place; compare sorted copies instead.
## Issue ticket number and link
## Stack
<!-- branch-stack -->
### Checklist
- [x] Is it a bug fix
- [ ] Is a typo/documentation fix
- [ ] Is a feature enhancement
- [ ] It is a refactor
- [ ] Created tests that fail without the change (if possible)
- [ ] This change does **not** modify the public API, gRPC protocols,
functionality behavior, CLI / service flags, or introduce a new feature
— **OR** I have discussed it with the NetBird team beforehand (link the
issue / Slack thread in the description). See
[CONTRIBUTING.md](https://github.com/netbirdio/netbird/blob/main/CONTRIBUTING.md#discuss-changes-with-the-netbird-team-first).
> By submitting this pull request, you confirm that you have read and
agree to the terms of the [Contributor License
Agreement](https://github.com/netbirdio/netbird/blob/main/CONTRIBUTOR_LICENSE_AGREEMENT.md).
## Documentation
Select exactly one:
- [ ] I added/updated documentation for this change
- [x] Documentation is **not needed** for this change (explain why)
### Docs PR URL (required if "docs added" is checked)
Paste the PR link from https://github.com/netbirdio/docs here:
https://github.com/netbirdio/docs/pull/__
The fake IP manager was only created at route manager construction, from the DNS feature flag fetched by the initial GetNetworkMap call. When the flag flipped to true mid-session, UpdateRoutes set useNewDNSRoute but never created the manager, so domain routes added after the flip got a DNS interceptor with a nil fake IP manager.
internalDnatFw only checked for a firewall and GOOS, so the interceptor took the DNAT path and called GetFakeIP/AllocateFakeIP on the nil *fakeip.Manager. These methods lock m.mu first, which is a nil pointer dereference: the first DNS answer for such a route panicked and crashed the VPN service. The fake IP blocks (240.0.0.0/8 and its v6 pair) also never reached the TUN, since only the constructor registered them.
Create the manager and its TUN routes from UpdateRoutes when the flag turns on, notify so the fake IP blocks get into the TUN without a client route change, and treat a nil manager as no internal DNAT.
This is groundwork for removing the initial GetNetworkMap fetch, after which every startup goes through the flag-off-to-on transition.
## Describe your changes
Three fixes to how the desktop GUI keeps the account email that backs
the SSO `login_hint`. Each is independent and reviewable on its own.
**1. Store the email after a GUI SSO login**
The daemon returns the authenticated user's email from `WaitSSOLogin`
but cannot persist it: it runs as root while the per-profile state file
is user-owned. The CLI's `handleSSOLogin` writes it after its own
`WaitSSOLogin`; the GUI path read the value and dropped it.
The profile was therefore left with no email, so `Profiles.List` showed
no account for it, and later logins and session extends went out with no
`login_hint` — leaving the IdP to pick an account instead of reusing the
one the profile belongs to. Mirror the CLI and store it, next to the
`Logout` path that already clears the same file for the same reason.
**2. File the email against the profile the login ran for**
`SetActiveProfileState` resolves the target itself, so it writes to
whichever profile is active when it is called. A GUI SSO login spans
seconds of user interaction in the browser, and the tray stays clickable
throughout: switching profiles in that window left the email filed under
the profile that happened to be active when the flow returned. The wrong
profile then advertised an account it does not own, and offered it as
the `login_hint` next time.
Adds `SetProfileState(id, state)`, the write-side counterpart of the
existing `GetProfileState(id)`, and keeps `SetActiveProfileState` as a
wrapper for callers with no particular profile in mind. `Login` now
reports the profile it resolved so the frontend can hand it back with
the SSO wait, which closes the window.
**3. Delete the email when a profile is removed**
Removing a profile left its state file behind: the daemon deletes what
it owns, but the email file is user-owned and out of reach for a root
daemon — the same split that already puts the `Logout` cleanup on the UI
side.
Beyond the stray file, legacy profiles are keyed by name rather than by
a generated ID, so recreating a profile under a removed one's name
inherited its email — shown as the account in the profile list and sent
as the `login_hint` on the next login.
## Issue ticket number and link
## Stack
<!-- branch-stack -->
### Checklist
- [x] Is it a bug fix
- [ ] Is a typo/documentation fix
- [ ] Is a feature enhancement
- [ ] It is a refactor
- [ ] Created tests that fail without the change (if possible)
- [ ] This change does **not** modify the public API, gRPC protocols,
functionality behavior, CLI / service flags, or introduce a new feature
— **OR** I have discussed it with the NetBird team beforehand (link the
issue / Slack thread in the description). See
[CONTRIBUTING.md](https://github.com/netbirdio/netbird/blob/main/CONTRIBUTING.md#discuss-changes-with-the-netbird-team-first).
> By submitting this pull request, you confirm that you have read and
agree to the terms of the [Contributor License
Agreement](https://github.com/netbirdio/netbird/blob/main/CONTRIBUTOR_LICENSE_AGREEMENT.md).
## Documentation
Select exactly one:
- [ ] I added/updated documentation for this change
- [x] Documentation is **not needed** for this change (explain why)
### Docs PR URL (required if "docs added" is checked)
Paste the PR link from https://github.com/netbirdio/docs here:
https://github.com/netbirdio/docs/pull/__
<!-- This is an auto-generated comment: release notes by coderabbit.ai
-->
## Summary by CodeRabbit
- **New Features**
- SSO login details can now be saved to the specific profile selected
during sign-in.
- Profile state can be managed independently for different profiles.
- **Bug Fixes**
- Removing a profile now also cleans up its associated saved state.
- Cleanup issues no longer prevent successful profile removal and are
handled gracefully.
- Existing active-profile behavior remains unchanged.
<!-- end of auto-generated comment: release notes by coderabbit.ai -->
## Describe your changes
`getInterfaceIndex` in the iOS upstream DNS resolver dereferenced the
result of `net.InterfaceByName` before checking the error, so a missing
interface (e.g. during teardown or renaming) caused a nil-pointer panic
instead of a DNS client error.
The helper now returns a wrapped error before touching the interface;
the only caller, `GetClientPrivate`, already propagates the error.
The helper moved to an un-build-tagged file so it can be unit-tested on
host platforms while remaining available to the iOS build. Added a test
covering the missing-interface path. Verified with the new host test, an
iOS arm64 CGO compile, and `git diff --check`.
## Issue ticket number and link
N/A
## Stack
<!-- branch-stack -->
Standalone PR based on `main`.
### Checklist
- [x] Is it a bug fix
- [ ] Is a typo/documentation fix
- [ ] Is a feature enhancement
- [ ] It is a refactor
- [x] Created tests that fail without the change (if possible)
- [x] This change does **not** modify the public API, gRPC protocols,
functionality behavior, CLI / service flags, or introduce a new feature
— **OR** I have discussed it with the NetBird team beforehand (link the
issue / Slack thread in the description). See
[CONTRIBUTING.md](https://github.com/netbirdio/netbird/blob/main/CONTRIBUTING.md#discuss-changes-with-the-netbird-team-first).
> By submitting this pull request, you confirm that you have read and
agree to the terms of the [Contributor License
Agreement](https://github.com/netbirdio/netbird/blob/main/CONTRIBUTOR_LICENSE_AGREEMENT.md).
## Documentation
Select exactly one:
- [ ] I added/updated documentation for this change
- [x] Documentation is **not needed** for this change (explain why)
Internal crash fix in the iOS DNS path; no user-facing behavior or
configuration changes.
### Docs PR URL (required if "docs added" is checked)
N/A
<!-- This is an auto-generated comment: release notes by coderabbit.ai
-->
## Summary by CodeRabbit
* **Bug Fixes**
* Improved handling of network interface lookup failures with clearer
error messages that identify the affected interface.
* Added validation for network interface lookups, including reliable
error handling when an interface cannot be found.
* **Tests**
* Added coverage for both successful interface resolution and
missing-interface scenarios.
<!-- end of auto-generated comment: release notes by coderabbit.ai -->
