feat(provider): add hetznercloud (#1046)

credits to @legend813 @likt0r @qdm12

.devcontainer/Dockerfile

@@ -1 +1 @@
-FROM qmcgaw/godevcontainer
+FROM ghcr.io/qdm12/godevcontainer:v0.22.0-alpine

.devcontainer/README.md

@@ -2,7 +2,7 @@
 
 Development container that can be used with VSCode.
 
-It works on Linux, Windows and OSX.
+It works on Linux, Windows (WSL2) and OSX.
 
 ## Requirements
 
@@ -13,49 +13,41 @@ It works on Linux, Windows and OSX.
 
 ## Setup
 
-1. Create the following files on your host if you don't have them:
+1. Create the following files and directory on your host if you don't have them:
 
     ```sh
     touch ~/.gitconfig ~/.zsh_history
+    mkdir -p ~/.ssh
     ```
 
-    Note that the development container will create the empty directories `~/.docker`, `~/.ssh` and `~/.kube` if you don't have them.
-
-1. **For Docker on OSX or Windows without WSL**: ensure your home directory `~` is accessible by Docker.
+1. **For OSX hosts**: ensure the project directory and your home directory `~` are accessible by Docker.
 1. Open the command palette in Visual Studio Code (CTRL+SHIFT+P).
-1. Select `Dev Containers: Open Folder in Container...` and choose the project directory.
+1. Select `Dev-Containers: Open Folder in Container...` and choose the project directory.
 
 ## Customization
 
-### Customize the image
+For any customization to take effect, you should "rebuild and reopen":
 
-You can make changes to the [Dockerfile](Dockerfile) and then rebuild the image. For example, your Dockerfile could be:
+1. Open the command palette in Visual Studio Code (CTRL+SHIFT+P)
+2. Select `Dev-Containers: Rebuild Container`
 
-```Dockerfile
-FROM qmcgaw/godevcontainer
-RUN apk add curl
-```
+Changes you can make are notably:
 
-To rebuild the image, either:
+- Changes to the Docker image in [Dockerfile](Dockerfile)
+- Changes to VSCode **settings** and **extensions** in [devcontainer.json](devcontainer.json).
+- Change the entrypoint script by adding a bind mount in [devcontainer.json](devcontainer.json) of a shell script to `/root/.welcome.sh` to replace the [current welcome script](https://github.com/qdm12/godevcontainer/blob/master/shell/.welcome.sh). For example:
 
-- With VSCode through the command palette, select `Remote-Containers: Rebuild and reopen in container`
-- With a terminal, go to this directory and `docker-compose build`
+    ```json
+    // Welcome script
+    {
+        "source": "/yourpath/.welcome.sh",
+        "target": "/root/.welcome.sh",
+        "type": "bind"
+    },
+    ```
 
-### Customize VS code settings
-
-You can customize **settings** and **extensions** in the [devcontainer.json](devcontainer.json) definition file.
-
-### Entrypoint script
-
-You can bind mount a shell script to `/root/.welcome.sh` to replace the [current welcome script](https://github.com/qdm12/basedevcontainer/blob/master/shell/.welcome.sh).
-
-### Publish a port
-
-To access a port from your host to your development container, publish a port in [docker-compose.yml](docker-compose.yml). You can also now do it directly with VSCode without restarting the container.
-
-### Run other services
-
-1. Modify [docker-compose.yml](docker-compose.yml) to launch other services at the same time as this development container, such as a test database:
+- Change the `vscode` service container configuration either in [docker-compose.yml](docker-compose.yml) or in [devcontainer.json](devcontainer.json).
+- Add other services in [docker-compose.yml](docker-compose.yml) to run together with the development VSCode service container. For example to add a test database:
 
     ```yml
       database:
@@ -65,5 +57,4 @@ To access a port from your host to your development container, publish a port in
           POSTGRES_PASSWORD: password
     ```
 
-1. In [devcontainer.json](devcontainer.json), change the line `"runServices": ["vscode"],` to `"runServices": ["vscode", "database"],`.
-1. In the VS code command palette, rebuild the container.
+- More options are documented in the [devcontainer.json reference](https://containers.dev/implementors/json_reference/).

.devcontainer/devcontainer.json

@@ -1,16 +1,51 @@
 {
+    // See https://containers.dev/implementors/json_reference/
+    // User defined settings
+    "containerEnv": {
+        "TZ": ""
+    },
+    // Fixed settings
     "name": "ddns-dev",
-    "dockerComposeFile": [
-        "docker-compose.yml"
-    ],
-    "service": "vscode",
-    "runServices": [
-        "vscode"
-    ],
-    "shutdownAction": "stopCompose",
     "postCreateCommand": "~/.windows.sh && go mod download && go mod tidy",
+    "dockerComposeFile": "docker-compose.yml",
+    "overrideCommand": true,
+    "service": "vscode",
     "workspaceFolder": "/workspace",
-    // "overrideCommand": "",
+    "mounts": [
+        // Source code
+        {
+            "source": "../",
+            "target": "/workspace",
+            "type": "bind"
+        },
+        // Zsh commands history persistence
+        {
+            "source": "${localEnv:HOME}/.zsh_history",
+            "target": "/root/.zsh_history",
+            "type": "bind"
+        },
+        // Git configuration file
+        {
+            "source": "${localEnv:HOME}/.gitconfig",
+            "target": "/root/.gitconfig",
+            "type": "bind"
+        },
+        // SSH directory for Linux, OSX and WSL
+        // On Linux and OSX, a symlink /mnt/ssh <-> ~/.ssh is
+        // created in the container. On Windows, files are copied
+        // from /mnt/ssh to ~/.ssh to fix permissions.
+        {
+            "source": "${localEnv:HOME}/.ssh",
+            "target": "/mnt/ssh",
+            "type": "bind"
+        },
+        // Docker socket to access the host Docker server
+        {
+            "source": "/var/run/docker.sock",
+            "target": "/var/run/docker.sock",
+            "type": "bind"
+        }
+    ],
     "customizations": {
         "vscode": {
             "extensions": [
@@ -58,12 +93,16 @@
                 "go.lintOnSave": "package",
                 "[go]": {
                     "editor.codeActionsOnSave": {
-                        "source.organizeImports": true
+                        "source.organizeImports": "always"
                     }
                 },
                 "gopls": {
+                    "formatting.gofumpt": true,
                     "usePlaceholders": false,
                     "staticcheck": true,
+                    "ui.diagnostic.analyses": {
+                        "ST1000": false
+                    },
                     "vulncheck": "Imports"
                 },
                 "remote.extensionKind": {

.devcontainer/docker-compose.yml

@@ -1,27 +1,3 @@
-version: "3.7"
-
 services:
   vscode:
     build: .
-    volumes:
-      - ../:/workspace
-      # Docker socket to access Docker server
-      - /var/run/docker.sock:/var/run/docker.sock
-      # SSH directory for Linux, OSX and WSL
-      # On Linux and OSX, a symlink /mnt/ssh <-> ~/.ssh is
-      # created in the container. On Windows, files are copied
-      # from /mnt/ssh to ~/.ssh to fix permissions.
-      - ~/.ssh:/mnt/ssh
-      # Shell history persistence
-      - ~/.zsh_history:/root/.zsh_history
-      # Git config
-      - ~/.gitconfig:/root/.gitconfig
-    environment:
-      - TZ=
-    cap_add:
-      # For debugging with dlv
-      - SYS_PTRACE
-    security_opt:
-      # For debugging with dlv
-      - seccomp:unconfined
-    entrypoint: [ "zsh", "-c", "while sleep 1000; do :; done" ]

.github/CONTRIBUTING.md

@@ -51,8 +51,8 @@ You might want to use an editor such as [Visual Studio Code](https://code.visual
 - Test the code: `go test ./...`
 - Lint the code `golangci-lint run`
 - Build the program: `go build -o app cmd/ddns-updater/main.go`
-- Build the Docker image (tests and lint included): `docker build -t qmcgaw/ddns-updater .`
-- Run the Docker container: `docker run -it --rm -v /yourpath/data:/updater/data qmcgaw/ddns-updater`
+- Build the Docker image (tests and lint included): `docker build -t ghcr.io/qdm12/ddns-updater .`
+- Run the Docker container: `docker run -it --rm -v /yourpath/data:/updater/data ghcr.io/qdm12/ddns-updater`
 
 ## Add a new DNS provider
 

.github/workflows/build.yml

@@ -37,7 +37,7 @@ jobs:
     env:
       DOCKER_BUILDKIT: "1"
     steps:
-      - uses: actions/checkout@v4
+      - uses: actions/checkout@v6
 
       - uses: reviewdog/action-misspell@v1
         with:
@@ -72,15 +72,15 @@ jobs:
       contents: read
       security-events: write
     steps:
-      - uses: actions/checkout@v4
-      - uses: actions/setup-go@v5
+      - uses: actions/checkout@v6
+      - uses: actions/setup-go@v6
         with:
-          go-version: "^1.22"
-      - uses: github/codeql-action/init@v3
+          go-version-file: go.mod
+      - uses: github/codeql-action/init@v4
         with:
           languages: go
-      - uses: github/codeql-action/autobuild@v3
-      - uses: github/codeql-action/analyze@v3
+      - uses: github/codeql-action/autobuild@v4
+      - uses: github/codeql-action/analyze@v4
 
   publish:
     if: |
@@ -97,7 +97,7 @@ jobs:
       packages: write
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v4
+      - uses: actions/checkout@v6
         with:
           fetch-depth: 0 # for gorelease last step
 
@@ -105,7 +105,7 @@ jobs:
       # https://github.com/docker/metadata-action
       - name: Extract Docker metadata
         id: meta
-        uses: docker/metadata-action@v5
+        uses: docker/metadata-action@v6
         with:
           flavor: |
             latest=${{ github.ref == format('refs/heads/{0}', github.event.repository.default_branch) }}
@@ -122,15 +122,15 @@ jobs:
             type=semver,pattern=v{{major}},enable=${{ !startsWith(github.ref, 'refs/tags/v0.') }}
             type=raw,value=latest,enable=${{ github.ref == format('refs/heads/{0}', github.event.repository.default_branch) }}
 
-      - uses: docker/setup-qemu-action@v3
-      - uses: docker/setup-buildx-action@v3
+      - uses: docker/setup-qemu-action@v4
+      - uses: docker/setup-buildx-action@v4
 
-      - uses: docker/login-action@v3
+      - uses: docker/login-action@v4
         with:
           username: qmcgaw
           password: ${{ secrets.DOCKERHUB_PASSWORD }}
 
-      - uses: docker/login-action@v3
+      - uses: docker/login-action@v4
         with:
           registry: ghcr.io
           username: ${{ github.repository_owner }}
@@ -141,7 +141,7 @@ jobs:
         run: echo "::set-output name=value::$(git rev-parse --short HEAD)"
 
       - name: Build and push final image
-        uses: docker/build-push-action@v6
+        uses: docker/build-push-action@v7
         with:
           platforms: linux/amd64,linux/386,linux/arm64,linux/arm/v6,linux/arm/v7,linux/s390x,linux/ppc64le,linux/riscv64
           labels: ${{ steps.meta.outputs.labels }}
@@ -153,12 +153,12 @@ jobs:
           push: true
 
       - if: github.event_name == 'release'
-        uses: actions/setup-go@v5
+        uses: actions/setup-go@v6
         with:
-          go-version: 1.22
+          go-version-file: go.mod
 
       - if: github.event_name == 'release'
-        uses: goreleaser/goreleaser-action@v6
+        uses: goreleaser/goreleaser-action@v7
         with:
           version: latest
           args: release --clean --config .github/workflows/configs/.goreleaser.yaml

.github/workflows/configs/mlc-config.json

@@ -4,7 +4,7 @@
       "pattern": "^http://localhost"
     },
     {
-      "pattern": "^https://api6.ipify.org$"
+      "pattern": "^https://api(6|64).ipify.org$"
     },
     {
       "pattern": "^http://ip1.dynupdate6.no-ip.com$"
@@ -29,6 +29,12 @@
     },
     {
       "pattern": "^https://www.duckdns.org/$"
+    },
+    {
+      "pattern": "^https://my.vultr.com/settings/#settingsapi$"
+    },
+    {
+      "pattern": "^https://www.namesilo.com"
     }
   ],
   "timeout": "20s",
@@ -36,6 +42,8 @@
   "fallbackRetryDelay": "30s",
   "aliveStatusCodes": [
     200,
-    206
+    206,
+    403,
+    429
   ]
 }

.github/workflows/labels.yml

@@ -10,9 +10,9 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: Checkout
-        uses: actions/checkout@v4
+        uses: actions/checkout@v6
       - name: Labeler
         if: success()
-        uses: crazy-max/ghaction-github-labeler@v5
+        uses: crazy-max/ghaction-github-labeler@v6
         with:
           github-token: ${{ secrets.GITHUB_TOKEN }}

.github/workflows/markdown.yml

@@ -18,9 +18,9 @@ jobs:
       actions: read
       contents: read
     steps:
-      - uses: actions/checkout@v4
+      - uses: actions/checkout@v6
 
-      - uses: DavidAnson/markdownlint-cli2-action@v17
+      - uses: DavidAnson/markdownlint-cli2-action@v23
         with:
           globs: "**.md"
           config: .markdownlint.json
@@ -37,7 +37,7 @@ jobs:
           use-quiet-mode: yes
           config-file: .github/workflows/configs/mlc-config.json
 
-      - uses: peter-evans/dockerhub-description@v4
+      - uses: peter-evans/dockerhub-description@v5
         if: github.repository == 'qdm12/ddns-updater' && github.event_name == 'push'
         with:
           username: qmcgaw

.golangci.yml

@@ -1,43 +1,70 @@
-linters-settings:
-  misspell:
-    locale: US
+version: "2"
 
-issues:
-  exclude-rules:
-    - path: _test\.go
-      linters:
-        - containedctx
-        - dupl
-        - goerr113
-    - text: Function `exitHealthchecksio` should pass the context parameter
-      linters:
-        - contextcheck
-    - source: "See https://"
-      linters:
-        - lll
+formatters:
+  enable:
+    - gci
+    - gofumpt
+    - goimports
+  exclusions:
+    generated: lax
+    paths:
+      - third_party$
+      - builtin$
+      - examples$
 
 linters:
+  settings:
+    misspell:
+      locale: US
+  exclusions:
+    generated: lax
+    presets:
+      - comments
+      - common-false-positives
+      - legacy
+      - std-error-handling
+    rules:
+      - linters:
+          - containedctx
+          - dupl
+          - err113
+        path: _test\.go
+      - linters:
+          - contextcheck
+        text: Function `exitHealthchecksio` should pass the context parameter
+      - linters:
+          - lll
+        source: See https://
+      - linters:
+          - revive
+        text: "var-naming: avoid meaningless package names"
+        path: internal\/provider\/utils\/
+    paths:
+      - third_party$
+      - builtin$
+      - examples$
   enable:
     # - cyclop
     - asasalint
     - asciicheck
     - bidichk
     - bodyclose
+    - canonicalheader
     - containedctx
     - contextcheck
+    - copyloopvar
     - decorder
     - dogsled
     - dupl
     - dupword
     - durationcheck
+    - err113
     - errchkjson
     - errname
     - errorlint
-    - execinquery
     - exhaustive
-    - exportloopref
+    - fatcontext
     - forcetypeassert
-    - gci
     - gocheckcompilerdirectives
     - gochecknoglobals
     - gochecknoinits
@@ -46,11 +73,9 @@ linters:
     - goconst
     - gocritic
     - gocyclo
+    - godoclint
     - godot
-    - goerr113
     - goheader
-    - goimports
-    - gomnd
     - gomoddirectives
     - goprintffuncname
     - gosec
@@ -59,11 +84,16 @@ linters:
     - importas
     - inamedparam
     - interfacebloat
+    - intrange
+    - iotamixing
     - ireturn
     - lll
     - maintidx
     - makezero
+    - mirror
     - misspell
+    - mnd
+    - modernize
     - musttag
     - nakedret
     - nestif
@@ -84,7 +114,6 @@ linters:
     - sloglint
     - sqlclosecheck
     - tagalign
-    - tenv
     - thelper
     - tparallel
     - unconvert

Dockerfile

@@ -1,13 +1,13 @@
 ARG BUILDPLATFORM=linux/amd64
-ARG ALPINE_VERSION=3.20
-ARG GO_VERSION=1.22
-ARG XCPUTRANSLATE_VERSION=v0.6.0
-ARG GOLANGCI_LINT_VERSION=v1.56.2
-ARG MOCKGEN_VERSION=v1.6.0
+ARG ALPINE_VERSION=3.23
+ARG GO_VERSION=1.26
+ARG XCPUTRANSLATE_VERSION=v0.9.0
+ARG GOLANGCI_LINT_VERSION=v2.11.4
+ARG MOCKGEN_VERSION=v0.6.0
 
-FROM --platform=${BUILDPLATFORM} qmcgaw/xcputranslate:${XCPUTRANSLATE_VERSION} AS xcputranslate
-FROM --platform=${BUILDPLATFORM} qmcgaw/binpot:golangci-lint-${GOLANGCI_LINT_VERSION} AS golangci-lint
-FROM --platform=${BUILDPLATFORM} qmcgaw/binpot:mockgen-${MOCKGEN_VERSION} AS mockgen
+FROM --platform=${BUILDPLATFORM} ghcr.io/qdm12/xcputranslate:${XCPUTRANSLATE_VERSION} AS xcputranslate
+FROM --platform=${BUILDPLATFORM} ghcr.io/qdm12/binpot:golangci-lint-${GOLANGCI_LINT_VERSION} AS golangci-lint
+FROM --platform=${BUILDPLATFORM} ghcr.io/qdm12/binpot:mockgen-${MOCKGEN_VERSION} AS mockgen
 
 FROM --platform=$BUILDPLATFORM golang:${GO_VERSION}-alpine${ALPINE_VERSION} AS base
 WORKDIR /tmp/gobuild
@@ -50,8 +50,7 @@ RUN git init && \
     rm -rf .git/
 
 FROM --platform=$BUILDPLATFORM base AS build
-RUN mkdir -p /tmp/data && \
-    touch /tmp/isdocker
+RUN mkdir -p /tmp/data
 ARG VERSION=unknown
 ARG CREATED="an unknown date"
 ARG COMMIT=unknown
@@ -73,7 +72,6 @@ USER ${UID}:${GID}
 WORKDIR /updater
 ENTRYPOINT ["/updater/ddns-updater"]
 COPY --from=build --chown=${UID}:${GID} /tmp/data /updater/data
-COPY --from=build --chown=${UID}:${GID} /tmp/isdocker /updater/isdocker
 ENV \
     # Core
     CONFIG= \

README.md

@@ -6,10 +6,8 @@ Program to keep DNS A and/or AAAA records updated for multiple DNS providers
 
 [![Build status](https://github.com/qdm12/ddns-updater/actions/workflows/build.yml/badge.svg)](https://github.com/qdm12/ddns-updater/actions/workflows/build.yml)
 
-[![dockeri.co](https://dockeri.co/image/qmcgaw/ddns-updater)](https://hub.docker.com/r/qmcgaw/ddns-updater)
-
 ![Last release](https://img.shields.io/github/release/qdm12/ddns-updater?label=Last%20release)
-![Last Docker tag](https://img.shields.io/docker/v/qmcgaw/ddns-updater?sort=semver&label=Last%20Docker%20tag)
+![Last Docker tag](https://img.shields.io/github/v/release/qdm12/ddns-updater?sort=semver&label=Last%20Docker%20tag)
 [![Last release size](https://img.shields.io/docker/image-size/qmcgaw/ddns-updater?sort=semver&label=Last%20released%20image)](https://hub.docker.com/r/qmcgaw/ddns-updater/tags?page=1&ordering=last_updated)
 ![GitHub last release date](https://img.shields.io/github/release-date/qdm12/ddns-updater?label=Last%20release%20date)
 ![Commits since release](https://img.shields.io/github/commits-since/qdm12/ddns-updater/latest?sort=semver)
@@ -22,7 +20,6 @@ Program to keep DNS A and/or AAAA records updated for multiple DNS providers
 [![GitHub issues](https://img.shields.io/github/issues/qdm12/ddns-updater.svg)](https://github.com/qdm12/ddns-updater/issues)
 [![GitHub closed issues](https://img.shields.io/github/issues-closed/qdm12/ddns-updater.svg)](https://github.com/qdm12/ddns-updater/issues?q=is%3Aissue+is%3Aclosed)
 
-[![Lines of code](https://img.shields.io/tokei/lines/github/qdm12/ddns-updater)](https://github.com/qdm12/ddns-updater)
 ![Code size](https://img.shields.io/github/languages/code-size/qdm12/ddns-updater)
 ![GitHub repo size](https://img.shields.io/github/repo-size/qdm12/ddns-updater)
 ![Go version](https://img.shields.io/github/go-mod/go-version/qdm12/ddns-updater)
@@ -44,18 +41,19 @@ This readme and the [docs/](docs/) directory are **versioned** to match the prog
 
 ## Features
 
-- Available as a Docker image [`qmcgaw/ddns-updater`](https://hub.docker.com/r/qmcgaw/ddns-updater) and [`ghcr.io/qdm12/ddns-updater`]((https://github.com/qdm12/ddns-updater/pkgs/container/ddns-updater))
+- Available as a Docker image [`ghcr.io/qdm12/ddns-updater`]((https://github.com/qdm12/ddns-updater/pkgs/container/ddns-updater)) and [`qmcgaw/ddns-updater`](https://hub.docker.com/r/qmcgaw/ddns-updater)
 - Available as [zero-dependency binaries for Linux, Windows and MacOS](https://github.com/qdm12/ddns-updater/releases)
 - 🆕 Available in the AUR as [`ddns-updater`](https://aur.archlinux.org/packages/ddns-updater) - see [#808](https://github.com/qdm12/ddns-updater/discussions/808)
 - Updates periodically A records for different DNS providers:
   - Aliyun
   - AllInkl
-  - Changeip
+  - ChangeIP
   - Cloudflare
   - DD24
   - DDNSS.de
   - deSEC
   - DigitalOcean
+  - Domeneshop
   - DonDominio
   - DNSOMatic
   - DNSPod
@@ -63,6 +61,7 @@ This readme and the [docs/](docs/) directory are **versioned** to match the prog
   - DuckDNS
   - DynDNS
   - Dynu
+  - DynV6
   - EasyDNS
   - FreeDNS
   - Gandi
@@ -70,14 +69,19 @@ This readme and the [docs/](docs/) directory are **versioned** to match the prog
   - GoDaddy
   - GoIP.de
   - He.net
-  - Hetzner
+  - Hetzner (legacy API)
+  - Hetzner Cloud
   - Infomaniak
   - INWX
-  - Ionos
+    - Ionos
+    - ipv64
   - Linode
+  - Loopia
   - LuaDNS
+  - Myaddr
   - Name.com
   - Namecheap
+  - NameSilo
   - Netcup
   - NoIP
   - Now-DNS
@@ -86,11 +90,13 @@ This readme and the [docs/](docs/) directory are **versioned** to match the prog
   - OVH
   - Porkbun
   - Route53
+  - Scaleway
   - Selfhost.de
   - Servercow.de
   - Spdyn
   - Strato.de
   - Variomedia.de
+  - Vultr
   - Zoneedit
   - **Want more?** [Create an issue for it](https://github.com/qdm12/ddns-updater/issues/new/choose)!
 - Web user interface (Desktop)
@@ -178,15 +184,15 @@ This readme and the [docs/](docs/) directory are **versioned** to match the prog
 1. Run the container with
 
     ```sh
-    docker run -d -p 8000:8000/tcp -v "$(pwd)"/data:/updater/data qmcgaw/ddns-updater
+    docker run -d -p 8000:8000/tcp -v "$(pwd)"/data:/updater/data ghcr.io/qdm12/ddns-updater
     ```
 
 1. The following is **optional**.
     - You can customize the program behavior using [environment variables](#environment-variables)
     - You can use [docker-compose.yml](docker-compose.yml) with `docker-compose up -d`
     - **Kubernetes**: check out the [k8s directory](k8s) for an installation guide and examples.
-    - Other [Docker image tags are available](https://hub.docker.com/repository/docker/qmcgaw/ddns-updater/tags)
-    - You can update the image with `docker pull qmcgaw/ddns-updater`
+    - Other [Docker image tags are available](https://github.com/qdm12/ddns-updater/pkgs/container/ddns-updater)
+    - You can update the image with `docker pull ghcr.io/qdm12/ddns-updater`
     - You can set your JSON configuration as a single environment variable line (i.e. `{"settings": [{"provider": "namecheap", ...}]}`), which takes precedence over config.json. Note however that if you don't bind mount the `/updater/data` directory, there won't be a persistent database file `/updater/updates.json` but it will still work.
 
 ## Configuration
@@ -213,11 +219,11 @@ Check the documentation for your DNS provider:
 - [Allinkl](docs/allinkl.md)
 - [ChangeIP](docs/changeip.md)
 - [Cloudflare](docs/cloudflare.md)
-- [Custom](docs/custom.md)
+- [DD24](docs/dd24.md)
 - [DDNSS.de](docs/ddnss.de.md)
 - [deSEC](docs/desec.md)
 - [DigitalOcean](docs/digitalocean.md)
-- [DD24](docs/dd24.md)
+- [Domeneshop](docs/domeneshop.md)
 - [DonDominio](docs/dondominio.md)
 - [DNSOMatic](docs/dnsomatic.md)
 - [DNSPod](docs/dnspod.md)
@@ -233,13 +239,19 @@ Check the documentation for your DNS provider:
 - [GoDaddy](docs/godaddy.md)
 - [GoIP.de](docs/goip.md)
 - [He.net](docs/he.net.md)
+- [Hetzner](docs/hetzner.md)
+- [HetznerCloud](docs/hetznercloud.md)
 - [Infomaniak](docs/infomaniak.md)
 - [INWX](docs/inwx.md)
 - [Ionos](docs/ionos.md)
+- [IPv64](docs/ipv64.md)
 - [Linode](docs/linode.md)
+- [Loopia](docs/loopia.md)
 - [LuaDNS](docs/luadns.md)
+- [Myaddr](docs/myaddr.md)
 - [Name.com](docs/name.com.md)
 - [Namecheap](docs/namecheap.md)
+- [NameSilo](docs/namesilo.md)
 - [Netcup](docs/netcup.md)
 - [NoIP](docs/noip.md)
 - [Now-DNS](docs/nowdns.md)
@@ -247,16 +259,21 @@ Check the documentation for your DNS provider:
 - [OpenDNS](docs/opendns.md)
 - [OVH](docs/ovh.md)
 - [Porkbun](docs/porkbun.md)
+- [Route53](docs/route53.md)
+- [Scaleway](docs/scaleway.md)
 - [Selfhost.de](docs/selfhost.de.md)
 - [Servercow.de](docs/servercow.md)
 - [Spdyn](docs/spdyn.md)
 - [Strato.de](docs/strato.md)
 - [Variomedia.de](docs/variomedia.md)
+- [Vultr](docs/vultr.md)
 - [Zoneedit](docs/zoneedit.md)
+- [Custom](docs/custom.md)
 
 Note that:
 
 - you can specify multiple owners/hosts for the same domain using a comma separated list. For example with `"domain": "example.com,sub.example.com,sub2.example.com",`.
+⚠️ this is a bit different for DuckDNS and GoIP, see their respective documentation.
 
 ### Environment variables
 
@@ -287,7 +304,7 @@ Note that:
 | `RESOLVER_ADDRESS` | Your network DNS | A plaintext DNS address to use to resolve your domain names defined in your settings only. For example it can be `1.1.1.1:53`. This is useful for split dns, see [#389](https://github.com/qdm12/ddns-updater/issues/389) |
 | `LOG_LEVEL` | `info` | Level of logging, `debug`, `info`, `warning` or `error` |
 | `LOG_CALLER` | `hidden` | Show caller per log line, `hidden` or `short` |
-| `SHOUTRRR_ADDRESSES` |  | (optional) Comma separated list of [Shoutrrr addresses](https://containrrr.dev/shoutrrr/v0.8/services/overview/) (notification services) |
+| `SHOUTRRR_ADDRESSES` | | (optional) Comma separated list of [Shoutrrr addresses](https://containrrr.dev/shoutrrr/v0.8/services/overview/) (notification services) |
 | `SHOUTRRR_DEFAULT_TITLE` | `DDNS Updater` | Default title for Shoutrrr notifications |
 | `TZ` | | Timezone to have accurate times, i.e. `America/Montreal` |
 | `UMASK` | System current umask | Umask to set for the program in octal, i.e. `0022` |
@@ -333,7 +350,7 @@ You can otherwise customize it with the following:
   - `wtfismyip` using [https://ipv6.wtfismyip.com/text](https://ipv6.wtfismyip.com/text)
   - `seeip` using [https://ipv6.seeip.org](https://ipv6.seeip.org)
   - You can also specify an HTTPS URL with prefix `url:` for example `url:https://ipinfo.io/ip`
-- `PUBLICIP_DNS_PROVIDERS` gets your public IPv4 address only or IPv6 address only or one of them (see #136). It can be one or more of the following:
+- `PUBLICIP_DNS_PROVIDERS` gets your public IPv4 address only or IPv6 address only or one of them (see [#136](https://github.com/qdm12/ddns-updater/issues/136)). It can be one or more of the following:
   - `cloudflare`
   - `opendns`
 
@@ -393,7 +410,7 @@ We could do an API call to get the record IP address every period, but that woul
 You can build the image yourself with:
 
 ```sh
-docker build -t qmcgaw/ddns-updater https://github.com/qdm12/ddns-updater.git
+docker build -t ghcr.io/qdm12/ddns-updater https://github.com/qdm12/ddns-updater.git
 ```
 
 You can use optional build arguments with `--build-arg KEY=VALUE` from the table below:

cmd/ddns-updater/main.go

@@ -99,7 +99,8 @@ func main() {
 }
 
 func _main(ctx context.Context, reader *reader.Reader, args []string, logger log.LoggerInterface,
-	buildInfo models.BuildInformation, timeNow func() time.Time) (err error) {
+	buildInfo models.BuildInformation, timeNow func() time.Time,
+) (err error) {
 	if len(args) > 1 {
 		switch args[1] {
 		case "version", "-version", "--version":
@@ -290,7 +291,8 @@ func printSplash(buildInfo models.BuildInformation) {
 }
 
 func readConfig(reader *reader.Reader, logger log.LoggerInterface) (
-	config config.Config, err error) {
+	config config.Config, err error,
+) {
 	err = config.Read(reader, logger)
 	if err != nil {
 		return config, fmt.Errorf("reading settings: %w", err)
@@ -320,7 +322,8 @@ func logProvidersCount(providersCount int, logger log.LeveledLogger) {
 
 func readRecords(providers []provider.Provider, persistentDB *persistence.Database,
 	logger log.LoggerInterface, shoutrrrClient *shoutrrr.Client) (
-	records []recordslib.Record, err error) {
+	records []recordslib.Record, err error,
+) {
 	records = make([]recordslib.Record, len(providers))
 	for i, provider := range providers {
 		logger.Info("Reading history from database: domain " +
@@ -338,7 +341,8 @@ func readRecords(providers []provider.Provider, persistentDB *persistence.Databa
 }
 
 func exitHealthchecksio(hioClient *healthchecksio.Client,
-	logger log.LoggerInterface, state healthchecksio.State) {
+	logger log.LoggerInterface, state healthchecksio.State,
+) {
 	const timeout = 3 * time.Second
 	ctx, cancel := context.WithTimeout(context.Background(), timeout)
 	defer cancel()
@@ -351,8 +355,9 @@ func exitHealthchecksio(hioClient *healthchecksio.Client,
 //nolint:ireturn
 func createHealthServer(db health.AllSelecter, resolver health.LookupIPer,
 	logger log.LoggerInterface, serverAddress string) (
-	healthServer goservices.Service, err error) {
-	if !health.IsDocker() {
+	healthServer goservices.Service, err error,
+) {
+	if serverAddress == "" {
 		return noop.New("healthcheck server"), nil
 	}
 	isHealthy := health.MakeIsHealthy(db, resolver)
@@ -364,7 +369,8 @@ func createHealthServer(db health.AllSelecter, resolver health.LookupIPer,
 func createServer(ctx context.Context, config config.Server,
 	logger log.LoggerInterface, db server.Database,
 	updaterService server.UpdateForcer) (
-	service goservices.Service, err error) {
+	service goservices.Service, err error,
+) {
 	if !*config.Enabled {
 		return noop.New("server"), nil
 	}

docker-compose.yml

@@ -1,7 +1,7 @@
 version: "3.7"
 services:
   ddns-updater:
-    image: qmcgaw/ddns-updater
+    image: ghcr.io/qdm12/ddns-updater
     container_name: ddns-updater
     network_mode: bridge
     ports:

docs/aliyun.md

@@ -28,6 +28,6 @@
 ### Optional parameters
 
 - `"ip_version"` can be `ipv4` (A records), or `ipv6` (AAAA records) or `ipv4 or ipv6` (update one of the two, depending on the public ip found). It defaults to `ipv4 or ipv6`.
-- `"ipv6_suffix"` is the IPv6 interface identifier suffix to use. It can be for example `0:0:0:0:72ad:8fbb:a54e:bedd/64`. If left empty, it defaults to no suffix and the raw public IPv6 address obtained is used in the record updating.
+- `"ipv6_suffix"` is the IPv6 interface identifier suffix to use. It can be for example `0:0:0:0:72ad:8fbb:a54e:bedd/64`. If left empty, it defaults to no suffix and the raw temporary IPv6 address of the machine is used in the record updating. You might want to set this to use your permanent IPv6 address instead of your temporary IPv6 address.
 
 ## Domain setup

docs/allinkl.md

@@ -28,6 +28,6 @@
 ### Optional parameters
 
 - `"ip_version"` can be `ipv4` (A records), or `ipv6` (AAAA records) or `ipv4 or ipv6` (update one of the two, depending on the public ip found). It defaults to `ipv4 or ipv6`.
-- `"ipv6_suffix"` is the IPv6 interface identifier suffix to use. It can be for example `0:0:0:0:72ad:8fbb:a54e:bedd/64`. If left empty, it defaults to no suffix and the raw public IPv6 address obtained is used in the record updating.
+- `"ipv6_suffix"` is the IPv6 interface identifier suffix to use. It can be for example `0:0:0:0:72ad:8fbb:a54e:bedd/64`. If left empty, it defaults to no suffix and the raw temporary IPv6 address of the machine is used in the record updating. You might want to set this to use your permanent IPv6 address instead of your temporary IPv6 address.
 
 ## Domain setup

docs/changeip.md

@@ -28,6 +28,6 @@
 ### Optional parameters
 
 - `"ip_version"` can be `ipv4` (A records), or `ipv6` (AAAA records) or `ipv4 or ipv6` (update one of the two, depending on the public ip found). It defaults to `ipv4 or ipv6`.
-- `"ipv6_suffix"` is the IPv6 interface identifier suffix to use. It can be for example `0:0:0:0:72ad:8fbb:a54e:bedd/64`. If left empty, it defaults to no suffix and the raw public IPv6 address obtained is used in the record updating.
+- `"ipv6_suffix"` is the IPv6 interface identifier suffix to use. It can be for example `0:0:0:0:72ad:8fbb:a54e:bedd/64`. If left empty, it defaults to no suffix and the raw temporary IPv6 address of the machine is used in the record updating. You might want to set this to use your permanent IPv6 address instead of your temporary IPv6 address.
 
 ## Domain setup

docs/cloudflare.md

@@ -35,6 +35,6 @@ See [this issue comment for context](https://github.com/qdm12/ddns-updater/issue
 
 - `"proxied"` can be set to `true` to use the proxy services of Cloudflare
 - `"ip_version"` can be `ipv4` (A records), or `ipv6` (AAAA records) or `ipv4 or ipv6` (update one of the two, depending on the public ip found). It defaults to `ipv4 or ipv6`.
-- `"ipv6_suffix"` is the IPv6 interface identifier suffix to use. It can be for example `0:0:0:0:72ad:8fbb:a54e:bedd/64`. If left empty, it defaults to no suffix and the raw public IPv6 address obtained is used in the record updating.
+- `"ipv6_suffix"` is the IPv6 interface identifier suffix to use. It can be for example `0:0:0:0:72ad:8fbb:a54e:bedd/64`. If left empty, it defaults to no suffix and the raw temporary IPv6 address of the machine is used in the record updating. You might want to set this to use your permanent IPv6 address instead of your temporary IPv6 address.
 
 Special thanks to @Starttoaster for helping out with the [documentation](https://gist.github.com/Starttoaster/07d568c2a99ad7631dd776688c988326) and testing.

docs/custom.md

@@ -30,11 +30,11 @@ Feel free to open issues to extend its configuration options.
 
 - `"domain"` is the domain to update. It can be `example.com` (root domain), `sub.example.com` (subdomain of `example.com`) or `*.example.com` for the wildcard.
 - `"url"` is the URL to update your records and should contain all the information EXCEPT the IP address to update
-- `"ipv4key"` is the URL query parameter name for the IPv4 address, for example `ipv4` will be added to the URL with `&ipv4=1.2.3.4`.
-- `"ipv6key"` is the URL query parameter name for the IPv6 address, for example `ipv6` will be added to the URL with `&ipv6=::aaff`. Even if you don't use IPv6, this must be set to something.
+- `"ipv4key"` is the URL query parameter name for the IPv4 address, for example `ipv4` will be added to the URL with `&ipv4=1.2.3.4`. In the rare case you do not wish to send an IPv4 query parameter to the registrar API when updating your A (IPv4) record, leave it to `"ipv4key": ""`.
+- `"ipv6key"` is the URL query parameter name for the IPv6 address, for example `ipv6` will be added to the URL with `&ipv6=::aaff`. In the rare case you do not wish to send an IPv6 query parameter to the registrar API when updating your AAAA (IPv6) record, leave it to `"ipv6key": ""`.
 - `"success_regex"` is a regular expression to match the response from the server to determine if the update was successful. You can use [regex101.com](https://regex101.com/) to find the regular expression you want. For example `good` would match any response containing the word "good".
 
 ### Optional parameters
 
 - `"ip_version"` can be `ipv4` (A records), or `ipv6` (AAAA records) or `ipv4 or ipv6` (update one of the two, depending on the public ip found). It defaults to `ipv4 or ipv6`.
-- `"ipv6_suffix"` is the IPv6 interface identifier suffix to use. It can be for example `0:0:0:0:72ad:8fbb:a54e:bedd/64`. If left empty, it defaults to no suffix and the raw public IPv6 address obtained is used in the record updating.
+- `"ipv6_suffix"` is the IPv6 interface identifier suffix to use. It can be for example `0:0:0:0:72ad:8fbb:a54e:bedd/64`. If left empty, it defaults to no suffix and the raw temporary IPv6 address of the machine is used in the record updating. You might want to set this to use your permanent IPv6 address instead of your temporary IPv6 address.

docs/dd24.md

@@ -26,4 +26,4 @@
 ### Optional parameters
 
 - `"ip_version"` can be `ipv4` (A records), or `ipv6` (AAAA records) or `ipv4 or ipv6` (update one of the two, depending on the public ip found). It defaults to `ipv4 or ipv6`.
-- `"ipv6_suffix"` is the IPv6 interface identifier suffix to use. It can be for example `0:0:0:0:72ad:8fbb:a54e:bedd/64`. If left empty, it defaults to no suffix and the raw public IPv6 address obtained is used in the record updating.
+- `"ipv6_suffix"` is the IPv6 interface identifier suffix to use. It can be for example `0:0:0:0:72ad:8fbb:a54e:bedd/64`. If left empty, it defaults to no suffix and the raw temporary IPv6 address of the machine is used in the record updating. You might want to set this to use your permanent IPv6 address instead of your temporary IPv6 address.

docs/ddnss.de.md

@@ -32,6 +32,6 @@
   - if it is `false`, the updates are done using the `ip` parameter and only one IP address can be set (ipv4 or ipv6, whichever is last sent).
   - if it is `true`, the updates are done using the `ip` and `ip6` parameters, for IPv4 and IPv6 respectively, and both can be set on the same record
 - `"ip_version"` can be `ipv4` (A records), or `ipv6` (AAAA records) or `ipv4 or ipv6` (update one of the two, depending on the public ip found). It defaults to `ipv4 or ipv6`.
-- `"ipv6_suffix"` is the IPv6 interface identifier suffix to use. It can be for example `0:0:0:0:72ad:8fbb:a54e:bedd/64`. If left empty, it defaults to no suffix and the raw public IPv6 address obtained is used in the record updating.
+- `"ipv6_suffix"` is the IPv6 interface identifier suffix to use. It can be for example `0:0:0:0:72ad:8fbb:a54e:bedd/64`. If left empty, it defaults to no suffix and the raw temporary IPv6 address of the machine is used in the record updating. You might want to set this to use your permanent IPv6 address instead of your temporary IPv6 address.
 
 ## Domain setup

docs/desec.md

@@ -21,12 +21,12 @@
 ### Compulsory parameters
 
 - `"domain"` is the domain to update. It can be `example.com` (root domain), `sub.example.com` (subdomain of `example.com`) or `*.example.com` for the wildcard.
-- `"token"` is your token that you can create [here](https://desec.io/tokens)
+- `"token"` is your token that you can create at [desec.io/tokens](https://desec.io/tokens)
 
 ### Optional parameters
 
 - `"ip_version"` can be `ipv4` (A records), or `ipv6` (AAAA records) or `ipv4 or ipv6` (update one of the two, depending on the public ip found). It defaults to `ipv4 or ipv6`.
-- `"ipv6_suffix"` is the IPv6 interface identifier suffix to use. It can be for example `0:0:0:0:72ad:8fbb:a54e:bedd/64`. If left empty, it defaults to no suffix and the raw public IPv6 address obtained is used in the record updating.
+- `"ipv6_suffix"` is the IPv6 interface identifier suffix to use. It can be for example `0:0:0:0:72ad:8fbb:a54e:bedd/64`. If left empty, it defaults to no suffix and the raw temporary IPv6 address of the machine is used in the record updating. You might want to set this to use your permanent IPv6 address instead of your temporary IPv6 address.
 
 ## Domain setup
 

docs/digitalocean.md

@@ -21,11 +21,11 @@
 ### Compulsory parameters
 
 - `"domain"` is the domain to update. It can be `example.com` (root domain), `sub.example.com` (subdomain of `example.com`) or `*.example.com` for the wildcard.
-- `"token"` is your token that you can create [here](https://cloud.digitalocean.com/settings/applications)
+- `"token"` is your token that you can create at [cloud.digitalocean.com/settings/applications](https://cloud.digitalocean.com/settings/applications)
 
 ### Optional parameters
 
 - `"ip_version"` can be `ipv4` (A records), or `ipv6` (AAAA records) or `ipv4 or ipv6` (update one of the two, depending on the public ip found). It defaults to `ipv4 or ipv6`.
-- `"ipv6_suffix"` is the IPv6 interface identifier suffix to use. It can be for example `0:0:0:0:72ad:8fbb:a54e:bedd/64`. If left empty, it defaults to no suffix and the raw public IPv6 address obtained is used in the record updating.
+- `"ipv6_suffix"` is the IPv6 interface identifier suffix to use. It can be for example `0:0:0:0:72ad:8fbb:a54e:bedd/64`. If left empty, it defaults to no suffix and the raw temporary IPv6 address of the machine is used in the record updating. You might want to set this to use your permanent IPv6 address instead of your temporary IPv6 address.
 
 ## Domain setup

docs/dnsomatic.md

@@ -28,6 +28,6 @@
 ### Optional parameters
 
 - `"ip_version"` can be `ipv4` (A records), or `ipv6` (AAAA records) or `ipv4 or ipv6` (update one of the two, depending on the public ip found). It defaults to `ipv4 or ipv6`.
-- `"ipv6_suffix"` is the IPv6 interface identifier suffix to use. It can be for example `0:0:0:0:72ad:8fbb:a54e:bedd/64`. If left empty, it defaults to no suffix and the raw public IPv6 address obtained is used in the record updating.
+- `"ipv6_suffix"` is the IPv6 interface identifier suffix to use. It can be for example `0:0:0:0:72ad:8fbb:a54e:bedd/64`. If left empty, it defaults to no suffix and the raw temporary IPv6 address of the machine is used in the record updating. You might want to set this to use your permanent IPv6 address instead of your temporary IPv6 address.
 
 ## Domain setup

docs/dnspod.md

@@ -26,6 +26,6 @@
 ### Optional parameters
 
 - `"ip_version"` can be `ipv4` (A records), or `ipv6` (AAAA records) or `ipv4 or ipv6` (update one of the two, depending on the public ip found). It defaults to `ipv4 or ipv6`.
-- `"ipv6_suffix"` is the IPv6 interface identifier suffix to use. It can be for example `0:0:0:0:72ad:8fbb:a54e:bedd/64`. If left empty, it defaults to no suffix and the raw public IPv6 address obtained is used in the record updating.
+- `"ipv6_suffix"` is the IPv6 interface identifier suffix to use. It can be for example `0:0:0:0:72ad:8fbb:a54e:bedd/64`. If left empty, it defaults to no suffix and the raw temporary IPv6 address of the machine is used in the record updating. You might want to set this to use your permanent IPv6 address instead of your temporary IPv6 address.
 
 ## Domain setup

docs/domeneshop.md

@@ -0,0 +1,31 @@
+# Domeneshop.no
+
+## Configuration
+
+### Example
+
+```json
+{
+  "settings": [
+    {
+      "provider": "domeneshop",
+      "domain": "domain.com,seconddomain.com",
+      "token": "token",
+      "secret": "secret",
+      "ip_version": "ipv4",
+      "ipv6_suffix": ""
+    }
+  ]
+}
+```
+
+### Compulsory parameters
+
+- `"domain"` is the domain to update. It can be `example.com` (root domain) or `sub.example.com` (subdomain of `example.com`)
+- `"token"` See [api.domeneshop.no/docs/](https://api.domeneshop.no/docs/) for instructions on how to generate credentials.
+- `"secret"`
+
+### Optional parameters
+
+- `"ip_version"` can be `ipv4` (A records), or `ipv6` (AAAA records) or `ipv4 or ipv6` (update one of the two, depending on the public ip found). It defaults to `ipv4 or ipv6`.
+- `"ipv6_suffix"` is the IPv6 interface identifier suffix to use. It can be for example `0:0:0:0:72ad:8fbb:a54e:bedd/64`. If left empty, it defaults to no suffix and the raw temporary IPv6 address of the machine is used in the record updating. You might want to set this to use your permanent IPv6 address instead of your temporary IPv6 address.

docs/dondominio.md

@@ -28,7 +28,7 @@
 ### Optional parameters
 
 - `"ip_version"` can be `ipv4` (A records), or `ipv6` (AAAA records) or `ipv4 or ipv6` (update one of the two, depending on the public ip found). It defaults to `ipv4 or ipv6`.
-- `"ipv6_suffix"` is the IPv6 interface identifier suffix to use. It can be for example `0:0:0:0:72ad:8fbb:a54e:bedd/64`. If left empty, it defaults to no suffix and the raw public IPv6 address obtained is used in the record updating.
+- `"ipv6_suffix"` is the IPv6 interface identifier suffix to use. It can be for example `0:0:0:0:72ad:8fbb:a54e:bedd/64`. If left empty, it defaults to no suffix and the raw temporary IPv6 address of the machine is used in the record updating. You might want to set this to use your permanent IPv6 address instead of your temporary IPv6 address.
 
 ## Domain setup
 

docs/dreamhost.md

@@ -27,6 +27,6 @@
 
 - `"domain"` is the domain to update. It can be `example.com` (root domain) or `sub.example.com` (subdomain of `example.com`).
 - `"ip_version"` can be `ipv4` (A records), or `ipv6` (AAAA records) or `ipv4 or ipv6` (update one of the two, depending on the public ip found). It defaults to `ipv4 or ipv6`.
-- `"ipv6_suffix"` is the IPv6 interface identifier suffix to use. It can be for example `0:0:0:0:72ad:8fbb:a54e:bedd/64`. If left empty, it defaults to no suffix and the raw public IPv6 address obtained is used in the record updating.
+- `"ipv6_suffix"` is the IPv6 interface identifier suffix to use. It can be for example `0:0:0:0:72ad:8fbb:a54e:bedd/64`. If left empty, it defaults to no suffix and the raw temporary IPv6 address of the machine is used in the record updating. You might want to set this to use your permanent IPv6 address instead of your temporary IPv6 address.
 
 ## Domain setup

docs/duckdns.md

@@ -20,13 +20,16 @@
 
 ### Compulsory parameters
 
-- `"domain"` is the domain to update. For example, for the owner/host `sub`, it would be `sub.duckdns.org`. The [eTLD](https://developer.mozilla.org/en-US/docs/Glossary/eTLD) must be `duckdns.org`.
+- `"domain"` is the domain to update. The [eTLD](https://developer.mozilla.org/en-US/docs/Glossary/eTLD) must be `duckdns.org`. For example:
+  - for the root owner/host `@`, it would be `mydomain.duckdns.org`
+  - for the owner/host `sub`, it would be `sub.mydomain.duckdns.org`
+  - for multiple domains, it can be `sub1.mydomain.duckdns.org,sub2.mydomain.duckdns.org` BUT it cannot be `a.duckdns.org,b.duckdns.org`, since the effective domains would be `a.duckdns.org` and `b.duckdns.org`
 - `"token"`
 
 ### Optional parameters
 
 - `"ip_version"` can be `ipv4` (A records), or `ipv6` (AAAA records) or `ipv4 or ipv6` (update one of the two, depending on the public ip found). It defaults to `ipv4 or ipv6`.
-- `"ipv6_suffix"` is the IPv6 interface identifier suffix to use. It can be for example `0:0:0:0:72ad:8fbb:a54e:bedd/64`. If left empty, it defaults to no suffix and the raw public IPv6 address obtained is used in the record updating.
+- `"ipv6_suffix"` is the IPv6 interface identifier suffix to use. It can be for example `0:0:0:0:72ad:8fbb:a54e:bedd/64`. If left empty, it defaults to no suffix and the raw temporary IPv6 address of the machine is used in the record updating. You might want to set this to use your permanent IPv6 address instead of your temporary IPv6 address.
 
 ## Domain setup
 

docs/dyndns.md

@@ -28,6 +28,6 @@
 ### Optional parameters
 
 - `"ip_version"` can be `ipv4` (A records), or `ipv6` (AAAA records) or `ipv4 or ipv6` (update one of the two, depending on the public ip found). It defaults to `ipv4 or ipv6`.
-- `"ipv6_suffix"` is the IPv6 interface identifier suffix to use. It can be for example `0:0:0:0:72ad:8fbb:a54e:bedd/64`. If left empty, it defaults to no suffix and the raw public IPv6 address obtained is used in the record updating.
+- `"ipv6_suffix"` is the IPv6 interface identifier suffix to use. It can be for example `0:0:0:0:72ad:8fbb:a54e:bedd/64`. If left empty, it defaults to no suffix and the raw temporary IPv6 address of the machine is used in the record updating. You might want to set this to use your permanent IPv6 address instead of your temporary IPv6 address.
 
 ## Domain setup

docs/dynu.md

@@ -29,7 +29,7 @@
 ### Optional parameters
 
 - `"ip_version"` can be `ipv4` (A records), or `ipv6` (AAAA records) or `ipv4 or ipv6` (update one of the two, depending on the public ip found). It defaults to `ipv4 or ipv6`.
-- `"ipv6_suffix"` is the IPv6 interface identifier suffix to use. It can be for example `0:0:0:0:72ad:8fbb:a54e:bedd/64`. If left empty, it defaults to no suffix and the raw public IPv6 address obtained is used in the record updating.
+- `"ipv6_suffix"` is the IPv6 interface identifier suffix to use. It can be for example `0:0:0:0:72ad:8fbb:a54e:bedd/64`. If left empty, it defaults to no suffix and the raw temporary IPv6 address of the machine is used in the record updating. You might want to set this to use your permanent IPv6 address instead of your temporary IPv6 address.
 - `"group"` specify the Group for which you want to set the IP (will update any domains and subdomains in the same group)
 
 ## Domain setup

docs/dynv6.md

@@ -21,11 +21,11 @@
 ### Compulsory parameters
 
 - `"domain"` is the domain to update. It can be `example.com` (root domain) or `sub.example.com` (subdomain of `example.com`).
-- `"token"` that you can obtain [here](https://dynv6.com/keys#token)
+- `"token"` that you can obtain from [dynv6.com/keys#token](https://dynv6.com/keys#token)
 
 ### Optional parameters
 
 - `"ip_version"` can be `ipv4` (A records), or `ipv6` (AAAA records) or `ipv4 or ipv6` (update one of the two, depending on the public ip found). It defaults to `ipv4 or ipv6`.
-- `"ipv6_suffix"` is the IPv6 interface identifier suffix to use. It can be for example `0:0:0:0:72ad:8fbb:a54e:bedd/64`. If left empty, it defaults to no suffix and the raw public IPv6 address obtained is used in the record updating.
+- `"ipv6_suffix"` is the IPv6 interface identifier suffix to use. It can be for example `0:0:0:0:72ad:8fbb:a54e:bedd/64`. If left empty, it defaults to no suffix and the raw temporary IPv6 address of the machine is used in the record updating. You might want to set this to use your permanent IPv6 address instead of your temporary IPv6 address.
 
 ## Domain setup

docs/easydns.md

@@ -28,6 +28,6 @@
 ### Optional parameters
 
 - `"ip_version"` can be `ipv4` (A records), or `ipv6` (AAAA records) or `ipv4 or ipv6` (update one of the two, depending on the public ip found). It defaults to `ipv4 or ipv6`.
-- `"ipv6_suffix"` is the IPv6 interface identifier suffix to use. It can be for example `0:0:0:0:72ad:8fbb:a54e:bedd/64`. If left empty, it defaults to no suffix and the raw public IPv6 address obtained is used in the record updating.
+- `"ipv6_suffix"` is the IPv6 interface identifier suffix to use. It can be for example `0:0:0:0:72ad:8fbb:a54e:bedd/64`. If left empty, it defaults to no suffix and the raw temporary IPv6 address of the machine is used in the record updating. You might want to set this to use your permanent IPv6 address instead of your temporary IPv6 address.
 
 ## Domain setup

docs/example.md

@@ -32,7 +32,7 @@
 ### Optional parameters
 
 - `"ip_version"` can be `ipv4` (A records), or `ipv6` (AAAA records) or `ipv4 or ipv6` (update one of the two, depending on the public ip found). It defaults to `ipv4 or ipv6`.
-- `"ipv6_suffix"` is the IPv6 interface identifier suffix to use. It can be for example `0:0:0:0:72ad:8fbb:a54e:bedd/64`. If left empty, it defaults to no suffix and the raw public IPv6 address obtained is used in the record updating.
+- `"ipv6_suffix"` is the IPv6 interface identifier suffix to use. It can be for example `0:0:0:0:72ad:8fbb:a54e:bedd/64`. If left empty, it defaults to no suffix and the raw temporary IPv6 address of the machine is used in the record updating. You might want to set this to use your permanent IPv6 address instead of your temporary IPv6 address.
 
 <!-- UPDATE THIS IF NEEDED -->
 

docs/freedns.md

@@ -26,7 +26,7 @@
 ### Optional parameters
 
 - `"ip_version"` can be `ipv4` (A records), or `ipv6` (AAAA records) or `ipv4 or ipv6` (update one of the two, depending on the public ip found). It defaults to `ipv4 or ipv6`.
-- `"ipv6_suffix"` is the IPv6 interface identifier suffix to use. It can be for example `0:0:0:0:72ad:8fbb:a54e:bedd/64`. If left empty, it defaults to no suffix and the raw public IPv6 address obtained is used in the record updating.
+- `"ipv6_suffix"` is the IPv6 interface identifier suffix to use. It can be for example `0:0:0:0:72ad:8fbb:a54e:bedd/64`. If left empty, it defaults to no suffix and the raw temporary IPv6 address of the machine is used in the record updating. You might want to set this to use your permanent IPv6 address instead of your temporary IPv6 address.
 
 ## Domain setup
 

docs/gandi.md

@@ -29,7 +29,7 @@ This provider uses Gandi v5 API
 ### Optional parameters
 
 - `"ip_version"` can be `ipv4` (A records), or `ipv6` (AAAA records) or `ipv4 or ipv6` (update one of the two, depending on the public ip found). It defaults to `ipv4 or ipv6`.
-- `"ipv6_suffix"` is the IPv6 interface identifier suffix to use. It can be for example `0:0:0:0:72ad:8fbb:a54e:bedd/64`. If left empty, it defaults to no suffix and the raw public IPv6 address obtained is used in the record updating.
+- `"ipv6_suffix"` is the IPv6 interface identifier suffix to use. It can be for example `0:0:0:0:72ad:8fbb:a54e:bedd/64`. If left empty, it defaults to no suffix and the raw temporary IPv6 address of the machine is used in the record updating. You might want to set this to use your permanent IPv6 address instead of your temporary IPv6 address.
 - `"ttl"` default is `3600`
 
 ## Domain setup

docs/gcp.md

@@ -28,10 +28,10 @@
 
 - `"project"` is the id of your Google Cloud project
 - `"zone"` is the zone, that your DNS record is located in
-- `"credentials"` is the JSON credentials for your Google Cloud project. This is usually downloaded as a JSON file, which you can copy paste the content as the value of the `"credentials"` key. More information on how to get it is available [here](https://cloud.google.com/docs/authentication/getting-started). Please ensure your service account has all necessary permissions to create/update/list/get DNS records within your project.
+- `"credentials"` is the JSON credentials for your Google Cloud project. This is usually downloaded as a JSON file, which you can copy paste the content as the value of the `"credentials"` key. More information on how to get it is available at [cloud.google.com/docs/authentication/getting-started](https://cloud.google.com/docs/authentication/getting-started). Please ensure your service account has all necessary permissions to create/update/list/get DNS records within your project.
 - `"domain"` is the domain to update. It can be `example.com` (root domain), `sub.example.com` (subdomain of `example.com`) or `*.example.com` for the wildcard.
 
 ### Optional parameters
 
 - `"ip_version"` can be `ipv4` (A records), or `ipv6` (AAAA records) or `ipv4 or ipv6` (update one of the two, depending on the public ip found). It defaults to `ipv4 or ipv6`.
-- `"ipv6_suffix"` is the IPv6 interface identifier suffix to use. It can be for example `0:0:0:0:72ad:8fbb:a54e:bedd/64`. If left empty, it defaults to no suffix and the raw public IPv6 address obtained is used in the record updating.
+- `"ipv6_suffix"` is the IPv6 interface identifier suffix to use. It can be for example `0:0:0:0:72ad:8fbb:a54e:bedd/64`. If left empty, it defaults to no suffix and the raw temporary IPv6 address of the machine is used in the record updating. You might want to set this to use your permanent IPv6 address instead of your temporary IPv6 address.

docs/godaddy.md

@@ -28,7 +28,7 @@
 ### Optional parameters
 
 - `"ip_version"` can be `ipv4` (A records), or `ipv6` (AAAA records) or `ipv4 or ipv6` (update one of the two, depending on the public ip found). It defaults to `ipv4 or ipv6`.
-- `"ipv6_suffix"` is the IPv6 interface identifier suffix to use. It can be for example `0:0:0:0:72ad:8fbb:a54e:bedd/64`. If left empty, it defaults to no suffix and the raw public IPv6 address obtained is used in the record updating.
+- `"ipv6_suffix"` is the IPv6 interface identifier suffix to use. It can be for example `0:0:0:0:72ad:8fbb:a54e:bedd/64`. If left empty, it defaults to no suffix and the raw temporary IPv6 address of the machine is used in the record updating. You might want to set this to use your permanent IPv6 address instead of your temporary IPv6 address.
 
 ## Domain setup
 

docs/goip.md

@@ -9,7 +9,7 @@
   "settings": [
     {
       "provider": "goip",
-      "domain": "mydomain.goip.de",
+      "domain": "sub.mydomain.goip.de",
       "username": "username",
       "password": "password",
       "ip_version": "",
@@ -23,10 +23,14 @@
 ### Compulsory parameters
 
 - `"domain"` is the domain to update. For example, for the owner/host `sub`, it would be `sub.goip.de`. The [eTLD](https://developer.mozilla.org/en-US/docs/Glossary/eTLD) must be `goip.de` or `goip.it`.
+- `"domain"` is the domain to update. The [eTLD](https://developer.mozilla.org/en-US/docs/Glossary/eTLD) must be `goip.de` or `goip.it`. For example:
+  - for the root owner/host `@`, it would be `mydomain.goip.de`
+  - for the owner/host `sub`, it would be `sub.mydomain.goip.de`
+  - for multiple domains, it can be `sub1.mydomain.goip.de,sub2.mydomain.goip.de` BUT it cannot be `a.goip.de,b.goip.de`, since the effective domains would be `a.goip.de` and `b.goip.de`
 - `"username"` is your goip.de username listed under "Routers"
 - `"password"` is your router account password
 
 ### Optional parameters
 
 - `"ip_version"` can be `ipv4` (A records), or `ipv6` (AAAA records) or `ipv4 or ipv6` (update one of the two, depending on the public ip found). It defaults to `ipv4`.
-- `"ipv6_suffix"` is the IPv6 interface identifier suffix to use. It can be for example `0:0:0:0:72ad:8fbb:a54e:bedd/64`. If left empty, it defaults to no suffix and the raw public IPv6 address obtained is used in the record updating.
+- `"ipv6_suffix"` is the IPv6 interface identifier suffix to use. It can be for example `0:0:0:0:72ad:8fbb:a54e:bedd/64`. If left empty, it defaults to no suffix and the raw temporary IPv6 address of the machine is used in the record updating. You might want to set this to use your permanent IPv6 address instead of your temporary IPv6 address.

docs/he.net.md

@@ -26,6 +26,6 @@
 ### Optional parameters
 
 - `"ip_version"` can be `ipv4` (A records), or `ipv6` (AAAA records) or `ipv4 or ipv6` (update one of the two, depending on the public ip found). It defaults to `ipv4 or ipv6`.
-- `"ipv6_suffix"` is the IPv6 interface identifier suffix to use. It can be for example `0:0:0:0:72ad:8fbb:a54e:bedd/64`. If left empty, it defaults to no suffix and the raw public IPv6 address obtained is used in the record updating.
+- `"ipv6_suffix"` is the IPv6 interface identifier suffix to use. It can be for example `0:0:0:0:72ad:8fbb:a54e:bedd/64`. If left empty, it defaults to no suffix and the raw temporary IPv6 address of the machine is used in the record updating. You might want to set this to use your permanent IPv6 address instead of your temporary IPv6 address.
 
 ## Domain setup

docs/hetzner.md

@@ -1,5 +1,7 @@
 # Hetzner
 
+⚠️ You should use [Hetzner Cloud](./hetznercloud.md) with the new Hetzner Cloud console instead, given this legacy Hetzner API is going to be shutdown soon.
+
 ## Configuration
 
 ### Example
@@ -31,4 +33,4 @@
 ### Optional parameters
 
 - `"ip_version"` can be `ipv4` (A records), or `ipv6` (AAAA records) or `ipv4 or ipv6` (update one of the two, depending on the public ip found). It defaults to `ipv4 or ipv6`.
-- `"ipv6_suffix"` is the IPv6 interface identifier suffix to use. It can be for example `0:0:0:0:72ad:8fbb:a54e:bedd/64`. If left empty, it defaults to no suffix and the raw public IPv6 address obtained is used in the record updating.
+- `"ipv6_suffix"` is the IPv6 interface identifier suffix to use. It can be for example `0:0:0:0:72ad:8fbb:a54e:bedd/64`. If left empty, it defaults to no suffix and the raw temporary IPv6 address of the machine is used in the record updating. You might want to set this to use your permanent IPv6 address instead of your temporary IPv6 address.

docs/hetznercloud.md

@@ -0,0 +1,32 @@
+# Hetzner Cloud
+
+This provider uses the Hetzner Cloud API `https://api.hetzner.cloud/v1/` which is different from the legacy Hetzner DNS API.
+
+## Configuration
+
+### Example
+
+```json
+{
+  "settings": [
+    {
+      "provider": "hetznercloud",
+      "domain": "example.com",
+      "token": "yourtoken",
+      "ip_version": "ipv4",
+      "ipv6_suffix": ""
+    }
+  ]
+}
+```
+
+### Compulsory parameters
+
+- `"domain"` is the domain to update. It can be `example.com` (root domain), `sub.example.com` (subdomain of `example.com`) or `*.example.com` for the wildcard.
+- `"token"` is your API token configured with DNS write permissions for your DNS zone, see [the Authentication section](https://docs.hetzner.com/cloud/api/getting-started/generating-api-token)
+
+### Optional parameters
+
+- `"ip_version"` can be `ipv4` (A records), or `ipv6` (AAAA records) or `ipv4 or ipv6` (update one of the two, depending on the public ip found). It defaults to `ipv4 or ipv6`.
+- `"ipv6_suffix"` is the IPv6 interface identifier suffix to use. It can be for example `0:0:0:0:72ad:8fbb:a54e:bedd/64`. If left empty, it defaults to no suffix and the raw temporary IPv6 address of the machine is used in the record updating. You might want to set this to use your permanent IPv6 address instead of your temporary IPv6 address.
+- `"ttl"` time to live for the DNS record in seconds. It is only used to add a record to the rrset, and is not used to update an existing record. If left empty, it defaults to the existing zone TTL.

docs/infomaniak.md

@@ -28,7 +28,7 @@
 ### Optional parameters
 
 - `"ip_version"` can be `ipv4` (A records), or `ipv6` (AAAA records) or `ipv4 or ipv6` (update one of the two, depending on the public ip found). It defaults to `ipv4 or ipv6`.
-- `"ipv6_suffix"` is the IPv6 interface identifier suffix to use. It can be for example `0:0:0:0:72ad:8fbb:a54e:bedd/64`. If left empty, it defaults to no suffix and the raw public IPv6 address obtained is used in the record updating.
+- `"ipv6_suffix"` is the IPv6 interface identifier suffix to use. It can be for example `0:0:0:0:72ad:8fbb:a54e:bedd/64`. If left empty, it defaults to no suffix and the raw temporary IPv6 address of the machine is used in the record updating. You might want to set this to use your permanent IPv6 address instead of your temporary IPv6 address.
 
 ## Domain setup
 

docs/inwx.md

@@ -2,6 +2,8 @@
 
 ## Configuration
 
+You must configure a [DynDNS Account in INWX](https://www.inwx.com/en/offer/dyndns) and use the configured account and hostname.
+
 ### Example
 
 ```json
@@ -21,13 +23,13 @@
 
 ### Compulsory parameters
 
-- `"domain"` is the domain to update. It can be `example.com` (root domain) or `sub.example.com` (subdomain of `example.com`).
+- `"domain"` is the domain configured for the DynDNS Account. It can be `example.com` (root domain) or `sub.example.com` (subdomain of `example.com`).
 - `"username"`
 - `"password"`
 
 ### Optional parameters
 
 - `"ip_version"` can be `ipv4` (A records), or `ipv6` (AAAA records) or `ipv4 or ipv6` (update one of the two, depending on the public ip found). It defaults to `ipv4 or ipv6`.
-- `"ipv6_suffix"` is the IPv6 interface identifier suffix to use. It can be for example `0:0:0:0:72ad:8fbb:a54e:bedd/64`. If left empty, it defaults to no suffix and the raw public IPv6 address obtained is used in the record updating.
+- `"ipv6_suffix"` is the IPv6 interface identifier suffix to use. It can be for example `0:0:0:0:72ad:8fbb:a54e:bedd/64`. If left empty, it defaults to no suffix and the raw temporary IPv6 address of the machine is used in the record updating. You might want to set this to use your permanent IPv6 address instead of your temporary IPv6 address.
 
 ## Domain setup

docs/ionos.md

@@ -21,9 +21,9 @@
 ### Compulsory parameters
 
 - `"domain"` is the domain to update. It can be `example.com` (root domain), `sub.example.com` (subdomain of `example.com`) or `*.example.com` for the wildcard.
-- `"api_key"` is your API key, obtained from [creating an API key](https://www.ionos.com/help/domains/configuring-your-ip-address/set-up-dynamic-dns-with-company-name/#c181598)
+- `"api_key"` is your API key, consisting of two parts — a prefix and the key itself — and can be obtained by [creating an API key](https://www.ionos.com/help/domains/configuring-your-ip-address/set-up-dynamic-dns-with-company-name/#c181598). It must follow the format `<prefix>.<key>`.
 
 ### Optional parameters
 
 - `"ip_version"` can be `ipv4` (A records), or `ipv6` (AAAA records) or `ipv4 or ipv6` (update one of the two, depending on the public ip found). It defaults to `ipv4 or ipv6`.
-- `"ipv6_suffix"` is the IPv6 interface identifier suffix to use. It can be for example `0:0:0:0:72ad:8fbb:a54e:bedd/64`. If left empty, it defaults to no suffix and the raw public IPv6 address obtained is used in the record updating.
+- `"ipv6_suffix"` is the IPv6 interface identifier suffix to use. It can be for example `0:0:0:0:72ad:8fbb:a54e:bedd/64`. If left empty, it defaults to no suffix and the raw temporary IPv6 address of the machine is used in the record updating. You might want to set this to use your permanent IPv6 address instead of your temporary IPv6 address.

docs/ipv64.md

@@ -0,0 +1,31 @@
+# IPv64
+
+## Configuration
+
+### Example
+
+```json
+{
+  "settings": [
+    {
+      "provider": "ipv64",
+      "domain": "domain.com",
+      "key": "key",
+      "ip_version": "ipv4",
+      "ipv6_suffix": ""
+    }
+  ]
+}
+```
+
+### Compulsory parameters
+
+- `"domain"` is the domain to update. It can be `example.com` (root domain) or `sub.example.com` (subdomain of `example.com`).
+- `"key"` that you can obtain at [ipv64.net/account](https://ipv64.net/account)
+
+### Optional parameters
+
+- `"ip_version"` can be `ipv4` (A records), or `ipv6` (AAAA records) or `ipv4 or ipv6` (update one of the two, depending on the public ip found). It defaults to `ipv4 or ipv6`.
+- `"ipv6_suffix"` is the IPv6 interface identifier suffix to use. It can be for example `0:0:0:0:72ad:8fbb:a54e:bedd/64`. If left empty, it defaults to no suffix and the raw temporary IPv6 address of the machine is used in the record updating. You might want to set this to use your permanent IPv6 address instead of your temporary IPv6 address.
+
+## Domain setup

docs/linode.md

@@ -26,7 +26,7 @@
 ### Optional parameters
 
 - `"ip_version"` can be `ipv4` (A records), or `ipv6` (AAAA records) or `ipv4 or ipv6` (update one of the two, depending on the public ip found). It defaults to `ipv4 or ipv6`.
-- `"ipv6_suffix"` is the IPv6 interface identifier suffix to use. It can be for example `0:0:0:0:72ad:8fbb:a54e:bedd/64`. If left empty, it defaults to no suffix and the raw public IPv6 address obtained is used in the record updating.
+- `"ipv6_suffix"` is the IPv6 interface identifier suffix to use. It can be for example `0:0:0:0:72ad:8fbb:a54e:bedd/64`. If left empty, it defaults to no suffix and the raw temporary IPv6 address of the machine is used in the record updating. You might want to set this to use your permanent IPv6 address instead of your temporary IPv6 address.
 
 ## Domain setup
 

docs/loopia.md

@@ -0,0 +1,31 @@
+# Loopia
+
+## Configuration
+
+### Example
+
+```json
+{
+  "settings": [
+    {
+      "provider": "loopia",
+      "domain": "domain.com",
+      "username": "username",
+      "password": "password",
+      "ip_version": "ipv4",
+      "ipv6_suffix": ""
+    }
+  ]
+}
+```
+
+### Compulsory parameters
+
+- `"domain"` is the domain to update. It can be `example.com` (root domain), `sub.example.com` (subdomain of `example.com`). It cannot be a wildcard domain.
+- `"username"`
+- `"password"`
+
+### Optional parameters
+
+- `"ip_version"` can be `ipv4` (A records), or `ipv6` (AAAA records) or `ipv4 or ipv6` (update one of the two, depending on the public ip found). It defaults to `ipv4 or ipv6`.
+- `"ipv6_suffix"` is the IPv6 interface identifier suffix to use. It can be for example `0:0:0:0:72ad:8fbb:a54e:bedd/64`. If left empty, it defaults to no suffix and the raw temporary IPv6 address of the machine is used in the record updating. You might want to set this to use your permanent IPv6 address instead of your temporary IPv6 address.

docs/luadns.md

@@ -28,7 +28,7 @@
 ### Optional parameters
 
 - `"ip_version"` can be `ipv4` (A records), or `ipv6` (AAAA records) or `ipv4 or ipv6` (update one of the two, depending on the public ip found). It defaults to `ipv4 or ipv6`.
-- `"ipv6_suffix"` is the IPv6 interface identifier suffix to use. It can be for example `0:0:0:0:72ad:8fbb:a54e:bedd/64`. If left empty, it defaults to no suffix and the raw public IPv6 address obtained is used in the record updating.
+- `"ipv6_suffix"` is the IPv6 interface identifier suffix to use. It can be for example `0:0:0:0:72ad:8fbb:a54e:bedd/64`. If left empty, it defaults to no suffix and the raw temporary IPv6 address of the machine is used in the record updating. You might want to set this to use your permanent IPv6 address instead of your temporary IPv6 address.
 
 ## Domain setup
 

docs/myaddr.md

@@ -0,0 +1,33 @@
+# [Myaddr](https://myaddr.tools/)
+
+## Configuration
+
+### Example
+
+```json
+{
+  "settings": [
+    {
+      "provider": "myaddr",
+      "domain": "your-name.myaddr.tools",
+      "key": "key",
+      "ip_version": "ipv4",
+      "ipv6_suffix": ""
+    }
+  ]
+}
+```
+
+### Compulsory parameters
+
+- `"domain"` - the **single** domain to update; note the `key` below updates all records and subdomains for this domain. It should be `your-name.myaddr.tools`.
+- `"key"` - the private key corresponding to the domain to update
+
+### Optional parameters
+
+- `"ip_version"` can be `ipv4` (A records), or `ipv6` (AAAA records) or `ipv4 or ipv6` (update one of the two, depending on the public ip found). It defaults to `ipv4 or ipv6`.
+- `"ipv6_suffix"` is the IPv6 interface identifier suffix to use. It can be for example `0:0:0:0:72ad:8fbb:a54e:bedd/64`. If left empty, it defaults to no suffix and the raw temporary IPv6 address of the machine is used in the record updating. You might want to set this to use your permanent IPv6 address instead of your temporary IPv6 address.
+
+## Domain setup
+
+Claim a subdomain at [myaddr.tools](https://myaddr.tools/)

docs/name.com.md

@@ -32,4 +32,4 @@
 
 - `"ttl"` is the time this record can be cached for in seconds. Name.com allows a minimum TTL of 300, or 5 minutes. Name.com defaults to 300 if not provided.
 - `"ip_version"` can be `ipv4` (A records), or `ipv6` (AAAA records) or `ipv4 or ipv6` (update one of the two, depending on the public ip found). It defaults to `ipv4 or ipv6`.
-- `"ipv6_suffix"` is the IPv6 interface identifier suffix to use. It can be for example `0:0:0:0:72ad:8fbb:a54e:bedd/64`. If left empty, it defaults to no suffix and the raw public IPv6 address obtained is used in the record updating.
+- `"ipv6_suffix"` is the IPv6 interface identifier suffix to use. It can be for example `0:0:0:0:72ad:8fbb:a54e:bedd/64`. If left empty, it defaults to no suffix and the raw temporary IPv6 address of the machine is used in the record updating. You might want to set this to use your permanent IPv6 address instead of your temporary IPv6 address.

docs/namesilo.md

@@ -0,0 +1,51 @@
+# NameSilo
+
+[![NameSilo Website](../readme/namesilo.jpg)](https://www.namesilo.com)
+
+## Configuration
+
+### Example
+
+```json
+{
+  "settings": [
+    {
+      "provider": "namesilo",
+      "domain": "sub.example.com",
+      "key": "71dZaE8c2Aa926Ca2E8c1",
+      "ttl": 7207,
+      "ip_version": "ipv4"
+    }
+  ]
+}
+```
+
+### Compulsory parameters
+
+- `"domain"` is the domain to update. It can be `example.com` (root domain), `sub.example.com` (subdomain of `example.com`) or `*.example.com` for the wildcard.
+- `"key"` is the NameSilo API Key obtained using the domain setup instructions below. For example: `71dZaE8c2Aa926Ca2E8c1`.
+
+### Optional parameters
+
+- `"ip_version"` can be `ipv4` (A records), or `ipv6` (AAAA records) or `ipv4 or ipv6` (update one of the two, depending on the public ip found). It defaults to `ipv4 or ipv6`.
+- `"ipv6_suffix"` is the IPv6 interface identifier suffix to use. It can be for example `0:0:0:0:72ad:8fbb:a54e:bedd/64`. If left empty, it defaults to no suffix and the raw temporary IPv6 address of the machine is used in the record updating. You might want to set this to use your permanent IPv6 address instead of your temporary IPv6 address.
+- `"ttl"` is the record's Time to Live (TTL), which defaults to `7207` seconds. It must be numeric, less than `2592001`, and greater than or equal to `3600`. TTL values of `3603` or `7207` may be subject to NameSilo's [Automatic TTL Adjustments](https://www.namesilo.com/support/v2/articles/domain-manager/dns-manager#auto_ttl).
+
+## Domain setup
+
+1. Login to the [Namesilo API Manager](https://www.namesilo.com/account/api-manager) with your account credentials.
+1. Generate an API key. The generated API key will look similar to `71dZaE8c2Aa926Ca2E8c1`.
+    - (do _not_ check the "Generate key for read-only access" box)
+
+    [![Before NameSilo API Key](../readme/namesilo1.jpg)](https://www.namesilo.com/account/api-manager)
+    [![After NameSilo API Key](../readme/namesilo2.jpg)](https://www.namesilo.com/account/api-manager)
+
+## Testing
+
+1. Go to the [NameSilo Domain Manager](https://www.namesilo.com/account_domains.php).
+1. Choose "Manage DNS for this domain" (the globe icon) for the domain you wish to test.
+    [![Manage DNS for this domain](../readme/namesilo3.jpg)](https://www.namesilo.com/account_domains.php)
+
+1. Change the IP address of the host to `127.0.0.1`.
+1. Run the ddns-updater.
+1. Refresh the Namesilo webpage to check the update occurred.

docs/netcup.md

@@ -34,4 +34,4 @@ Also keep in mind, that TTL, Expire, Retry and Refresh values of the given Domai
 ### Optional parameters
 
 - `"ip_version"` can be `ipv4` (A records), or `ipv6` (AAAA records) or `ipv4 or ipv6` (update one of the two, depending on the public ip found). It defaults to `ipv4 or ipv6`.
-- `"ipv6_suffix"` is the IPv6 interface identifier suffix to use. It can be for example `0:0:0:0:72ad:8fbb:a54e:bedd/64`. If left empty, it defaults to no suffix and the raw public IPv6 address obtained is used in the record updating.
+- `"ipv6_suffix"` is the IPv6 interface identifier suffix to use. It can be for example `0:0:0:0:72ad:8fbb:a54e:bedd/64`. If left empty, it defaults to no suffix and the raw temporary IPv6 address of the machine is used in the record updating. You might want to set this to use your permanent IPv6 address instead of your temporary IPv6 address.

docs/njalla.md

@@ -26,7 +26,7 @@
 ### Optional parameters
 
 - `"ip_version"` can be `ipv4` (A records), or `ipv6` (AAAA records) or `ipv4 or ipv6` (update one of the two, depending on the public ip found). It defaults to `ipv4 or ipv6`.
-- `"ipv6_suffix"` is the IPv6 interface identifier suffix to use. It can be for example `0:0:0:0:72ad:8fbb:a54e:bedd/64`. If left empty, it defaults to no suffix and the raw public IPv6 address obtained is used in the record updating.
+- `"ipv6_suffix"` is the IPv6 interface identifier suffix to use. It can be for example `0:0:0:0:72ad:8fbb:a54e:bedd/64`. If left empty, it defaults to no suffix and the raw temporary IPv6 address of the machine is used in the record updating. You might want to set this to use your permanent IPv6 address instead of your temporary IPv6 address.
 
 ## Domain setup
 

docs/noip.md

@@ -28,6 +28,6 @@
 ### Optional parameters
 
 - `"ip_version"` can be `ipv4` (A records), or `ipv6` (AAAA records) or `ipv4 or ipv6` (update one of the two, depending on the public ip found). It defaults to `ipv4 or ipv6`.
-- `"ipv6_suffix"` is the IPv6 interface identifier suffix to use. It can be for example `0:0:0:0:72ad:8fbb:a54e:bedd/64`. If left empty, it defaults to no suffix and the raw public IPv6 address obtained is used in the record updating.
+- `"ipv6_suffix"` is the IPv6 interface identifier suffix to use. It can be for example `0:0:0:0:72ad:8fbb:a54e:bedd/64`. If left empty, it defaults to no suffix and the raw temporary IPv6 address of the machine is used in the record updating. You might want to set this to use your permanent IPv6 address instead of your temporary IPv6 address.
 
 ## Domain setup

docs/nowdns.md

@@ -28,4 +28,4 @@
 ### Optional parameters
 
 - `"ip_version"` can be `ipv4` (A records), or `ipv6` (AAAA records) or `ipv4 or ipv6` (update one of the two, depending on the public ip found). It defaults to `ipv4 or ipv6`.
-- `"ipv6_suffix"` is the IPv6 interface identifier suffix to use. It can be for example `0:0:0:0:72ad:8fbb:a54e:bedd/64`. If left empty, it defaults to no suffix and the raw public IPv6 address obtained is used in the record updating.
+- `"ipv6_suffix"` is the IPv6 interface identifier suffix to use. It can be for example `0:0:0:0:72ad:8fbb:a54e:bedd/64`. If left empty, it defaults to no suffix and the raw temporary IPv6 address of the machine is used in the record updating. You might want to set this to use your permanent IPv6 address instead of your temporary IPv6 address.

docs/opendns.md

@@ -28,6 +28,6 @@
 ### Optional parameters
 
 - `"ip_version"` can be `ipv4` (A records), or `ipv6` (AAAA records) or `ipv4 or ipv6` (update one of the two, depending on the public ip found). It defaults to `ipv4 or ipv6`.
-- `"ipv6_suffix"` is the IPv6 interface identifier suffix to use. It can be for example `0:0:0:0:72ad:8fbb:a54e:bedd/64`. If left empty, it defaults to no suffix and the raw public IPv6 address obtained is used in the record updating.
+- `"ipv6_suffix"` is the IPv6 interface identifier suffix to use. It can be for example `0:0:0:0:72ad:8fbb:a54e:bedd/64`. If left empty, it defaults to no suffix and the raw temporary IPv6 address of the machine is used in the record updating. You might want to set this to use your permanent IPv6 address instead of your temporary IPv6 address.
 
 ## Domain setup

docs/ovh.md

@@ -40,7 +40,7 @@ The ZoneDNS implementation allows you to update any record name including *.your
 ### Optional parameters
 
 - `"ip_version"` can be `ipv4` (A records), or `ipv6` (AAAA records) or `ipv4 or ipv6` (update one of the two, depending on the public ip found). It defaults to `ipv4 or ipv6`.
-- `"ipv6_suffix"` is the IPv6 interface identifier suffix to use. It can be for example `0:0:0:0:72ad:8fbb:a54e:bedd/64`. If left empty, it defaults to no suffix and the raw public IPv6 address obtained is used in the record updating.
+- `"ipv6_suffix"` is the IPv6 interface identifier suffix to use. It can be for example `0:0:0:0:72ad:8fbb:a54e:bedd/64`. If left empty, it defaults to no suffix and the raw temporary IPv6 address of the machine is used in the record updating. You might want to set this to use your permanent IPv6 address instead of your temporary IPv6 address.
 - `"mode"` select between two modes, OVH's dynamic hosting service (`"dynamic"`) or OVH's API (`"api"`). Default is `"dynamic"`
 
 ## Domain setup

docs/porkbun.md

@@ -10,8 +10,8 @@
     {
       "provider": "porkbun",
       "domain": "domain.com",
-      "api_key": "sk1_7d119e3f656b00ae042980302e1425a04163c476efec1833q3cb0w54fc6f5022",
-      "secret_api_key": "pk1_5299b57125c8f3cdf347d2fe0e713311ee3a1e11f11a14942b26472593e35368",
+      "api_key": "pk1_5299b57125c8f3cdf347d2fe0e713311ee3a1e11f11a14942b26472593e35368",
+      "secret_api_key": "sk1_7d119e3f656b00ae042980302e1425a04163c476efec1833q3cb0w54fc6f5022",
       "ip_version": "ipv4",
       "ipv6_suffix": ""
     }
@@ -29,7 +29,7 @@
 ### Optional parameters
 
 - `"ip_version"` can be `ipv4` (A records), or `ipv6` (AAAA records) or `ipv4 or ipv6` (update one of the two, depending on the public ip found). It defaults to `ipv4 or ipv6`.
-- `"ipv6_suffix"` is the IPv6 interface identifier suffix to use. It can be for example `0:0:0:0:72ad:8fbb:a54e:bedd/64`. If left empty, it defaults to no suffix and the raw public IPv6 address obtained is used in the record updating.
+- `"ipv6_suffix"` is the IPv6 interface identifier suffix to use. It can be for example `0:0:0:0:72ad:8fbb:a54e:bedd/64`. If left empty, it defaults to no suffix and the raw temporary IPv6 address of the machine is used in the record updating. You might want to set this to use your permanent IPv6 address instead of your temporary IPv6 address.
 
 ## Domain setup
 

docs/scaleway.md

@@ -0,0 +1,36 @@
+# Example.com
+
+## Configuration
+
+If something is unclear in the documentation below, please refer to the [scaleway API documentation](https://www.scaleway.com/en/developers/api/domains-and-dns/#path-records-update-records-within-a-dns-zone).
+
+### Example
+
+```json
+{
+    "settings": [
+        {
+            "provider": "scaleway",
+            "domain": "domain.com",
+            "secret_key": "<SECRET_KEY>",
+            "ip_version": "ipv4",
+            "ipv6_suffix": ""
+        }
+    ]
+}
+```
+
+### Compulsory parameters
+
+- `"domain"` is the domain to update. It can be `example.com` (root domain), `sub.example.com` (subdomain of `example.com`) or `*.example.com` for the wildcard.
+- `"secret_key"` is your secret key
+
+### Optional parameters
+
+- `"ip_version"` can be `ipv4` (A records), or `ipv6` (AAAA records) or `ipv4 or ipv6` (update one of the two, depending on the public ip found). It defaults to `ipv4 or ipv6`.
+- `"ipv6_suffix"` is the IPv6 interface identifier suffix to use. It can be for example `0:0:0:0:72ad:8fbb:a54e:bedd/64`. If left empty, it defaults to no suffix and the raw temporary IPv6 address of the machine is used in the record updating. You might want to set this to use your permanent IPv6 address instead of your temporary IPv6 address.
+- `"ttl"` is the TTL of the DNS record to update, if you want to specify it.
+
+## Domain setup
+
+If you need more information about how to configure your domain, you can check the [scaleway official documentation](https://www.scaleway.com/en/docs/network/domains-and-dns/).

docs/selfhost.de.md

@@ -28,6 +28,6 @@
 ### Optional parameters
 
 - `"ip_version"` can be `ipv4` (A records), or `ipv6` (AAAA records) or `ipv4 or ipv6` (update one of the two, depending on the public ip found). It defaults to `ipv4 or ipv6`.
-- `"ipv6_suffix"` is the IPv6 interface identifier suffix to use. It can be for example `0:0:0:0:72ad:8fbb:a54e:bedd/64`. If left empty, it defaults to no suffix and the raw public IPv6 address obtained is used in the record updating.
+- `"ipv6_suffix"` is the IPv6 interface identifier suffix to use. It can be for example `0:0:0:0:72ad:8fbb:a54e:bedd/64`. If left empty, it defaults to no suffix and the raw temporary IPv6 address of the machine is used in the record updating. You might want to set this to use your permanent IPv6 address instead of your temporary IPv6 address.
 
 ## Domain setup

docs/servercow.md

@@ -30,8 +30,8 @@
 
 - `"ttl"` can be set to an integer value for record TTL in seconds (if not set the default is 120)
 - `"ip_version"` can be `ipv4` (A records), or `ipv6` (AAAA records) or `ipv4 or ipv6` (update one of the two, depending on the public ip found). It defaults to `ipv4 or ipv6`.
-- `"ipv6_suffix"` is the IPv6 interface identifier suffix to use. It can be for example `0:0:0:0:72ad:8fbb:a54e:bedd/64`. If left empty, it defaults to no suffix and the raw public IPv6 address obtained is used in the record updating.
+- `"ipv6_suffix"` is the IPv6 interface identifier suffix to use. It can be for example `0:0:0:0:72ad:8fbb:a54e:bedd/64`. If left empty, it defaults to no suffix and the raw temporary IPv6 address of the machine is used in the record updating. You might want to set this to use your permanent IPv6 address instead of your temporary IPv6 address.
 
 ## Domain setup
 
-See [their article](https://cp.servercow.de/en/plugin/support_manager/knowledgebase/view/34/dns-api-v1/7/)
+See [their article](https://wiki.servercow.de/en/domains/dns_api/api-syntax/)

docs/spdyn.md

@@ -36,4 +36,4 @@
 ### Optional parameters
 
 - `"ip_version"` can be `ipv4` (A records), or `ipv6` (AAAA records) or `ipv4 or ipv6` (update one of the two, depending on the public ip found). It defaults to `ipv4 or ipv6`.
-- `"ipv6_suffix"` is the IPv6 interface identifier suffix to use. It can be for example `0:0:0:0:72ad:8fbb:a54e:bedd/64`. If left empty, it defaults to no suffix and the raw public IPv6 address obtained is used in the record updating.
+- `"ipv6_suffix"` is the IPv6 interface identifier suffix to use. It can be for example `0:0:0:0:72ad:8fbb:a54e:bedd/64`. If left empty, it defaults to no suffix and the raw temporary IPv6 address of the machine is used in the record updating. You might want to set this to use your permanent IPv6 address instead of your temporary IPv6 address.

docs/strato.md

@@ -26,7 +26,7 @@
 ### Optional parameters
 
 - `"ip_version"` can be `ipv4` (A records), or `ipv6` (AAAA records) or `ipv4 or ipv6` (update one of the two, depending on the public ip found). It defaults to `ipv4 or ipv6`.
-- `"ipv6_suffix"` is the IPv6 interface identifier suffix to use. It can be for example `0:0:0:0:72ad:8fbb:a54e:bedd/64`. If left empty, it defaults to no suffix and the raw public IPv6 address obtained is used in the record updating.
+- `"ipv6_suffix"` is the IPv6 interface identifier suffix to use. It can be for example `0:0:0:0:72ad:8fbb:a54e:bedd/64`. If left empty, it defaults to no suffix and the raw temporary IPv6 address of the machine is used in the record updating. You might want to set this to use your permanent IPv6 address instead of your temporary IPv6 address.
 
 ## Domain setup
 

docs/variomedia.md

@@ -28,7 +28,7 @@
 ### Optional parameters
 
 - `"ip_version"` can be `ipv4` (A records), or `ipv6` (AAAA records) or `ipv4 or ipv6` (update one of the two, depending on the public ip found). It defaults to `ipv4 or ipv6`.
-- `"ipv6_suffix"` is the IPv6 interface identifier suffix to use. It can be for example `0:0:0:0:72ad:8fbb:a54e:bedd/64`. If left empty, it defaults to no suffix and the raw public IPv6 address obtained is used in the record updating.
+- `"ipv6_suffix"` is the IPv6 interface identifier suffix to use. It can be for example `0:0:0:0:72ad:8fbb:a54e:bedd/64`. If left empty, it defaults to no suffix and the raw temporary IPv6 address of the machine is used in the record updating. You might want to set this to use your permanent IPv6 address instead of your temporary IPv6 address.
 
 ## Domain setup
 

docs/vercel.md

@@ -0,0 +1,39 @@
+# Vercel
+
+## Configuration
+
+### Example
+
+```json
+{
+  "settings": [
+    {
+      "provider": "vercel",
+      "domain": "domain.com",
+      "token": "yourtoken",
+      "ip_version": "ipv4",
+      "ipv6_suffix": "",
+      "team_id": ""
+    }
+  ]
+}
+```
+
+### Compulsory parameters
+
+- `"domain"` is the domain to update. It can be `example.com` (root domain), `sub.example.com` (subdomain of `example.com`) or `*.example.com` for the wildcard.
+- `"token"` is your Vercel API token. You can create one at [Vercel Account Settings > Tokens](https://vercel.com/account/tokens).
+
+### Optional parameters
+
+- `"team_id"` is your Vercel team ID. Required if the domain belongs to a team rather than your personal account. You can find this in your team settings.
+- `"ttl"` is the TTL in seconds for the DNS record. It defaults to being not set, using the existing TTL configured for the record in Vercel or the default TTL determined by Vercel.
+- `"ip_version"` can be `ipv4` (A records), or `ipv6` (AAAA records) or `ipv4 or ipv6` (update one of the two, depending on the public ip found). It defaults to `ipv4 or ipv6`.
+- `"ipv6_suffix"` is the IPv6 interface identifier suffix to use. It can be for example `0:0:0:0:72ad:8fbb:a54e:bedd/64`. If left empty, it defaults to no suffix and the raw temporary IPv6 address of the machine is used in the record updating. You might want to set this to use your permanent IPv6 address instead of your temporary IPv6 address.
+
+## Domain setup
+
+1. Ensure your domain is added to Vercel. You can do this via the [Vercel Dashboard](https://vercel.com/dashboard) under your project's Domain settings, or via the API.
+1. Your domain must be using Vercel's nameservers or have DNS management delegated to Vercel for this provider to work.
+1. Create an API token with appropriate permissions at [Vercel Account Settings > Tokens](https://vercel.com/account/tokens).
+1. If the domain belongs to a team, make sure to include the `team_id` parameter in your configuration.

docs/vultr.md

@@ -0,0 +1,30 @@
+# Vultr
+
+## Configuration
+
+### Example
+
+```json
+{
+  "settings": [
+    {
+      "provider": "vultr",
+      "domain": "potato.example.com",
+      "apikey": "AAAAAAAAAAAAAAA",
+      "ttl": 300,
+      "ip_version": "ipv4"
+    }
+  ]
+}
+```
+
+### Compulsory parameters
+
+- `"domain"` is the domain to update. It can be a root domain (i.e. `example.com`) or a subdomain (i.e. `potato.example.com`) or a wildcard (i.e. `*.example.com`). In case of a wildcard, it only works if there is no existing wildcard records of any record type.
+- `"apikey"` is your API key which can be obtained from [my.vultr.com/settings/](https://my.vultr.com/settings/#settingsapi).
+
+### Optional parameters
+
+- `"ip_version"` can be `ipv4` (A records), or `ipv6` (AAAA records) or `ipv4 or ipv6` (update one of the two, depending on the public ip found). It defaults to `ipv4 or ipv6`.
+- `"ipv6_suffix"` is the IPv6 interface identifier suffix to use. It can be for example `0:0:0:0:72ad:8fbb:a54e:bedd/64`. If left empty, it defaults to no suffix and the raw temporary IPv6 address of the machine is used in the record updating. You might want to set this to use your permanent IPv6 address instead of your temporary IPv6 address.
+- `"ttl"` is the record TTL which defaults to 900 seconds.

docs/zoneedit.md

@@ -34,7 +34,7 @@ set the environment variable as `PERIOD=11m` to check your public IP address and
 ### Optional parameters
 
 - `"ip_version"` can be `ipv4` (A records), or `ipv6` (AAAA records) or `ipv4 or ipv6` (update one of the two, depending on the public ip found). It defaults to `ipv4 or ipv6`.
-- `"ipv6_suffix"` is the IPv6 interface identifier suffix to use. It can be for example `0:0:0:0:72ad:8fbb:a54e:bedd/64`. If left empty, it defaults to no suffix and the raw public IPv6 address obtained is used in the record updating.
+- `"ipv6_suffix"` is the IPv6 interface identifier suffix to use. It can be for example `0:0:0:0:72ad:8fbb:a54e:bedd/64`. If left empty, it defaults to no suffix and the raw temporary IPv6 address of the machine is used in the record updating. You might want to set this to use your permanent IPv6 address instead of your temporary IPv6 address.
 
 ## Domain setup
 

go.mod

@@ -1,41 +1,39 @@
 module github.com/qdm12/ddns-updater
 
-go 1.22.0
-
-toolchain go1.22.5
+go 1.26.0
 
 require (
-	github.com/breml/rootcerts v0.2.18
+	github.com/breml/rootcerts v0.3.5
 	github.com/containrrr/shoutrrr v0.8.0
-	github.com/go-chi/chi/v5 v5.1.0
-	github.com/golang/mock v1.6.0
-	github.com/miekg/dns v1.1.62
+	github.com/go-chi/chi/v5 v5.2.5
+	github.com/miekg/dns v1.1.72
 	github.com/qdm12/goservices v0.1.0
-	github.com/qdm12/gosettings v0.4.4-rc1
+	github.com/qdm12/gosettings v0.4.4
 	github.com/qdm12/gosplash v0.2.0
-	github.com/qdm12/gotree v0.2.0
+	github.com/qdm12/gotree v0.3.0
 	github.com/qdm12/log v0.1.0
-	github.com/stretchr/testify v1.9.0
-	golang.org/x/mod v0.21.0
-	golang.org/x/net v0.29.0
-	golang.org/x/oauth2 v0.23.0
+	github.com/stretchr/testify v1.11.1
+	go.uber.org/mock v0.6.0
+	golang.org/x/mod v0.35.0
+	golang.org/x/net v0.53.0
+	golang.org/x/oauth2 v0.36.0
 )
 
 require (
-	cloud.google.com/go/compute/metadata v0.3.0 // indirect
+	cloud.google.com/go/compute/metadata v0.9.0 // indirect
 	github.com/davecgh/go-spew v1.1.1 // indirect
-	github.com/fatih/color v1.15.0 // indirect
-	github.com/go-logr/logr v1.4.1 // indirect
+	github.com/fatih/color v1.18.0 // indirect
+	github.com/go-logr/logr v1.4.3 // indirect
 	github.com/golang/protobuf v1.5.4 // indirect
-	github.com/mattn/go-colorable v0.1.13 // indirect
-	github.com/mattn/go-isatty v0.0.17 // indirect
+	github.com/mattn/go-colorable v0.1.14 // indirect
+	github.com/mattn/go-isatty v0.0.20 // indirect
 	github.com/pmezard/go-difflib v1.0.0 // indirect
-	golang.org/x/exp v0.0.0-20231110203233-9a3e6036ecaa // indirect
-	golang.org/x/sync v0.7.0 // indirect
-	golang.org/x/sys v0.25.0 // indirect
-	golang.org/x/tools v0.22.0 // indirect
-	google.golang.org/protobuf v1.34.1 // indirect
+	golang.org/x/exp v0.0.0-20251219203646-944ab1f22d93 // indirect
+	golang.org/x/sync v0.20.0 // indirect
+	golang.org/x/sys v0.43.0 // indirect
+	golang.org/x/tools v0.43.0 // indirect
+	google.golang.org/protobuf v1.36.11 // indirect
 	gopkg.in/yaml.v3 v3.0.1 // indirect
-	kernel.org/pub/linux/libs/security/libcap/cap v1.2.69 // indirect
-	kernel.org/pub/linux/libs/security/libcap/psx v1.2.69 // indirect
+	kernel.org/pub/linux/libs/security/libcap/cap v1.2.77 // indirect
+	kernel.org/pub/linux/libs/security/libcap/psx v1.2.77 // indirect
 )

go.sum

@@ -1,36 +1,35 @@
-cloud.google.com/go/compute/metadata v0.3.0 h1:Tz+eQXMEqDIKRsmY3cHTL6FVaynIjX2QxYC4trgAKZc=
-cloud.google.com/go/compute/metadata v0.3.0/go.mod h1:zFmK7XCadkQkj6TtorcaGlCW1hT1fIilQDwofLpJ20k=
-github.com/breml/rootcerts v0.2.18 h1:KjZaNT7AX/akUjzpStuwTMQs42YHlPyc6NmdwShVba0=
-github.com/breml/rootcerts v0.2.18/go.mod h1:S/PKh+4d1HUn4HQovEB8hPJZO6pUZYrIhmXBhsegfXw=
+cloud.google.com/go/compute/metadata v0.9.0 h1:pDUj4QMoPejqq20dK0Pg2N4yG9zIkYGdBtwLoEkH9Zs=
+cloud.google.com/go/compute/metadata v0.9.0/go.mod h1:E0bWwX5wTnLPedCKqk3pJmVgCBSM6qQI1yTBdEb3C10=
+github.com/breml/rootcerts v0.3.5 h1:oi7YiZ25HH52+mrKyjrMkcAFfnRDUf6HO8aUDr7RlJI=
+github.com/breml/rootcerts v0.3.5/go.mod h1:S/PKh+4d1HUn4HQovEB8hPJZO6pUZYrIhmXBhsegfXw=
 github.com/containrrr/shoutrrr v0.8.0 h1:mfG2ATzIS7NR2Ec6XL+xyoHzN97H8WPjir8aYzJUSec=
 github.com/containrrr/shoutrrr v0.8.0/go.mod h1:ioyQAyu1LJY6sILuNyKaQaw+9Ttik5QePU8atnAdO2o=
 github.com/davecgh/go-spew v1.1.1 h1:vj9j/u1bqnvCEfJOwUhtlOARqs3+rkHYY13jYWTU97c=
 github.com/davecgh/go-spew v1.1.1/go.mod h1:J7Y8YcW2NihsgmVo/mv3lAwl/skON4iLHjSsI+c5H38=
-github.com/fatih/color v1.15.0 h1:kOqh6YHBtK8aywxGerMG2Eq3H6Qgoqeo13Bk2Mv/nBs=
-github.com/fatih/color v1.15.0/go.mod h1:0h5ZqXfHYED7Bhv2ZJamyIOUej9KtShiJESRwBDUSsw=
-github.com/go-chi/chi/v5 v5.1.0 h1:acVI1TYaD+hhedDJ3r54HyA6sExp3HfXq7QWEEY/xMw=
-github.com/go-chi/chi/v5 v5.1.0/go.mod h1:DslCQbL2OYiznFReuXYUmQ2hGd1aDpCnlMNITLSKoi8=
-github.com/go-logr/logr v1.4.1 h1:pKouT5E8xu9zeFC39JXRDukb6JFQPXM5p5I91188VAQ=
-github.com/go-logr/logr v1.4.1/go.mod h1:9T104GzyrTigFIr8wt5mBrctHMim0Nb2HLGrmQ40KvY=
+github.com/fatih/color v1.18.0 h1:S8gINlzdQ840/4pfAwic/ZE0djQEH3wM94VfqLTZcOM=
+github.com/fatih/color v1.18.0/go.mod h1:4FelSpRwEGDpQ12mAdzqdOukCy4u8WUtOY6lkT/6HfU=
+github.com/go-chi/chi/v5 v5.2.5 h1:Eg4myHZBjyvJmAFjFvWgrqDTXFyOzjj7YIm3L3mu6Ug=
+github.com/go-chi/chi/v5 v5.2.5/go.mod h1:X7Gx4mteadT3eDOMTsXzmI4/rwUpOwBHLpAfupzFJP0=
+github.com/go-logr/logr v1.4.3 h1:CjnDlHq8ikf6E492q6eKboGOC0T8CDaOvkHCIg8idEI=
+github.com/go-logr/logr v1.4.3/go.mod h1:9T104GzyrTigFIr8wt5mBrctHMim0Nb2HLGrmQ40KvY=
 github.com/go-task/slim-sprig v0.0.0-20230315185526-52ccab3ef572 h1:tfuBGBXKqDEevZMzYi5KSi8KkcZtzBcTgAUUtapy0OI=
 github.com/go-task/slim-sprig v0.0.0-20230315185526-52ccab3ef572/go.mod h1:9Pwr4B2jHnOSGXyyzV8ROjYa2ojvAY6HCGYYfMoC3Ls=
 github.com/golang/mock v1.6.0 h1:ErTB+efbowRARo13NNdxyJji2egdxLGQhRaY+DUumQc=
 github.com/golang/mock v1.6.0/go.mod h1:p6yTPP+5HYm5mzsMV8JkE6ZKdX+/wYM6Hr+LicevLPs=
 github.com/golang/protobuf v1.5.4 h1:i7eJL8qZTpSEXOPTxNKhASYpMn+8e5Q6AdndVa1dWek=
 github.com/golang/protobuf v1.5.4/go.mod h1:lnTiLA8Wa4RWRcIUkrtSVa5nRhsEGBg48fD6rSs7xps=
-github.com/google/go-cmp v0.6.0 h1:ofyhxvXcZhMsU5ulbFiLKl/XBFqE1GSq7atu8tAmTRI=
-github.com/google/go-cmp v0.6.0/go.mod h1:17dUlkBOakJ0+DkrSSNjCkIjxS6bF9zb3elmeNGIjoY=
+github.com/google/go-cmp v0.7.0 h1:wk8382ETsv4JYUZwIsn6YpYiWiBsYLSJiTsyBybVuN8=
+github.com/google/go-cmp v0.7.0/go.mod h1:pXiqmnSA92OHEEa9HXL2W4E7lf9JzCmGVUdgjX3N/iU=
 github.com/google/pprof v0.0.0-20210407192527-94a9f03dee38 h1:yAJXTCF9TqKcTiHJAE8dj7HMvPfh66eeA2JYW7eFpSE=
 github.com/google/pprof v0.0.0-20210407192527-94a9f03dee38/go.mod h1:kpwsk12EmLew5upagYY7GY0pfYCcupk39gWOCRROcvE=
 github.com/jarcoal/httpmock v1.3.0 h1:2RJ8GP0IIaWwcC9Fp2BmVi8Kog3v2Hn7VXM3fTd+nuc=
 github.com/jarcoal/httpmock v1.3.0/go.mod h1:3yb8rc4BI7TCBhFY8ng0gjuLKJNquuDNiPaZjnENuYg=
-github.com/mattn/go-colorable v0.1.13 h1:fFA4WZxdEF4tXPZVKMLwD8oUnCTTo08duU7wxecdEvA=
-github.com/mattn/go-colorable v0.1.13/go.mod h1:7S9/ev0klgBDR4GtXTXX8a3vIGJpMovkB8vQcUbaXHg=
-github.com/mattn/go-isatty v0.0.16/go.mod h1:kYGgaQfpe5nmfYZH+SKPsOc2e4SrIfOl2e/yFXSvRLM=
-github.com/mattn/go-isatty v0.0.17 h1:BTarxUcIeDqL27Mc+vyvdWYSL28zpIhv3RoTdsLMPng=
-github.com/mattn/go-isatty v0.0.17/go.mod h1:kYGgaQfpe5nmfYZH+SKPsOc2e4SrIfOl2e/yFXSvRLM=
-github.com/miekg/dns v1.1.62 h1:cN8OuEF1/x5Rq6Np+h1epln8OiyPWV+lROx9LxcGgIQ=
-github.com/miekg/dns v1.1.62/go.mod h1:mvDlcItzm+br7MToIKqkglaGhlFMHJ9DTNNWONWXbNQ=
+github.com/mattn/go-colorable v0.1.14 h1:9A9LHSqF/7dyVVX6g0U9cwm9pG3kP9gSzcuIPHPsaIE=
+github.com/mattn/go-colorable v0.1.14/go.mod h1:6LmQG8QLFO4G5z1gPvYEzlUgJ2wF+stgPZH1UqBm1s8=
+github.com/mattn/go-isatty v0.0.20 h1:xfD0iDuEKnDkl03q4limB+vH+GxLEtL/jb4xVJSWWEY=
+github.com/mattn/go-isatty v0.0.20/go.mod h1:W+V8PltTTMOvKvAeJH7IuucS94S2C6jfK/D7dTCTo3Y=
+github.com/miekg/dns v1.1.72 h1:vhmr+TF2A3tuoGNkLDFK9zi36F2LS+hKTRW0Uf8kbzI=
+github.com/miekg/dns v1.1.72/go.mod h1:+EuEPhdHOsfk6Wk5TT2CzssZdqkmFhf8r+aVyDEToIs=
 github.com/onsi/ginkgo/v2 v2.9.2 h1:BA2GMJOtfGAfagzYtrAlufIP0lq6QERkFmHLMLPwFSU=
 github.com/onsi/ginkgo/v2 v2.9.2/go.mod h1:WHcJJG2dIlcCqVfBAwUCrJxSPFb6v4azBwgxeMeDuts=
 github.com/onsi/gomega v1.27.6 h1:ENqfyGeS5AX/rlXDd/ETokDz93u0YufY1Pgxuy/PvWE=
@@ -39,63 +38,42 @@ github.com/pmezard/go-difflib v1.0.0 h1:4DBwDE0NGyQoBHbLQYPwSUPoCMWR5BEzIk/f1lZb
 github.com/pmezard/go-difflib v1.0.0/go.mod h1:iKH77koFhYxTK1pcRnkKkqfTogsbg7gZNVY4sRDYZ/4=
 github.com/qdm12/goservices v0.1.0 h1:9sODefm/yuIGS7ynCkEnNlMTAYn9GzPhtcK4F69JWvc=
 github.com/qdm12/goservices v0.1.0/go.mod h1:/JOFsAnHFiSjyoXxa5FlfX903h20K5u/3rLzCjYVMck=
-github.com/qdm12/gosettings v0.4.4-rc1 h1:VT+6O6ww3Cn5v5/LgY2zlXoiCkZzbaLDWaA8ufQoOLY=
-github.com/qdm12/gosettings v0.4.4-rc1/go.mod h1:CPrt2YC4UsURTrslmhxocVhMCW03lIrqdH2hzIf5prg=
+github.com/qdm12/gosettings v0.4.4 h1:SM6tOZDf6k8qbjWU8KWyBF4mWIixfsKCfh9DGRLHlj4=
+github.com/qdm12/gosettings v0.4.4/go.mod h1:CPrt2YC4UsURTrslmhxocVhMCW03lIrqdH2hzIf5prg=
 github.com/qdm12/gosplash v0.2.0 h1:DOxCEizbW6ZG+FgpH2oK1atT6bM8MHL9GZ2ywSS4zZY=
 github.com/qdm12/gosplash v0.2.0/go.mod h1:k+1PzhO0th9cpX4q2Nneu4xTsndXqrM/x7NTIYmJ4jo=
-github.com/qdm12/gotree v0.2.0 h1:+58ltxkNLUyHtATFereAcOjBVfY6ETqRex8XK90Fb/c=
-github.com/qdm12/gotree v0.2.0/go.mod h1:1SdFaqKZuI46U1apbXIf25pDMNnrPuYLEqMF/qL4lY4=
+github.com/qdm12/gotree v0.3.0 h1:Q9f4C571EFK7ZEsPkEL2oGZX7I+ZhVxhh1ZSydW+5yI=
+github.com/qdm12/gotree v0.3.0/go.mod h1:iz06uXmRR4Aq9v6tX7mosXStO/yGHxRA1hbyD0UVeYw=
 github.com/qdm12/log v0.1.0 h1:jYBd/xscHYpblzZAd2kjZp2YmuYHjAAfbTViJWxoPTw=
 github.com/qdm12/log v0.1.0/go.mod h1:Vchi5M8uBvHfPNIblN4mjXn/oSbiWguQIbsgF1zdQPI=
-github.com/stretchr/testify v1.9.0 h1:HtqpIVDClZ4nwg75+f6Lvsy/wHu+3BoSGCbBAcpTsTg=
-github.com/stretchr/testify v1.9.0/go.mod h1:r2ic/lqez/lEtzL7wO/rwa5dbSLXVDPFyf8C91i36aY=
-github.com/yuin/goldmark v1.3.5/go.mod h1:mwnBkeHKe2W/ZEtQ+71ViKU8L12m81fl3OWwC1Zlc8k=
-golang.org/x/crypto v0.0.0-20190308221718-c2843e01d9a2/go.mod h1:djNgcEr1/C05ACkg1iLfiJU5Ep61QUkGW8qpdssI0+w=
-golang.org/x/crypto v0.0.0-20191011191535-87dc89f01550/go.mod h1:yigFU9vqHzYiE8UmvKecakEJjdnWj3jj499lnFckfCI=
-golang.org/x/exp v0.0.0-20231110203233-9a3e6036ecaa h1:FRnLl4eNAQl8hwxVVC17teOw8kdjVDVAiFMtgUdTSRQ=
-golang.org/x/exp v0.0.0-20231110203233-9a3e6036ecaa/go.mod h1:zk2irFbV9DP96SEBUUAy67IdHUaZuSnrz1n472HUCLE=
-golang.org/x/mod v0.4.2/go.mod h1:s0Qsj1ACt9ePp/hMypM3fl4fZqREWJwdYDEqhRiZZUA=
-golang.org/x/mod v0.21.0 h1:vvrHzRwRfVKSiLrG+d4FMl/Qi4ukBCE6kZlTUkDYRT0=
-golang.org/x/mod v0.21.0/go.mod h1:6SkKJ3Xj0I0BrPOZoBy3bdMptDDU9oJrpohJ3eWZ1fY=
-golang.org/x/net v0.0.0-20190404232315-eb5bcb51f2a3/go.mod h1:t9HGtf8HONx5eT2rtn7q6eTqICYqUVnKs3thJo3Qplg=
-golang.org/x/net v0.0.0-20190620200207-3b0461eec859/go.mod h1:z5CRVTTTmAJ677TzLLGU+0bjPO0LkuOLi4/5GtJWs/s=
-golang.org/x/net v0.0.0-20210405180319-a5a99cb37ef4/go.mod h1:p54w0d4576C0XHj96bSt6lcn1PtDYWL6XObtHCRCNQM=
-golang.org/x/net v0.29.0 h1:5ORfpBpCs4HzDYoodCDBbwHzdR5UrLBZ3sOnUJmFoHo=
-golang.org/x/net v0.29.0/go.mod h1:gLkgy8jTGERgjzMic6DS9+SP0ajcu6Xu3Orq/SpETg0=
-golang.org/x/oauth2 v0.23.0 h1:PbgcYx2W7i4LvjJWEbf0ngHV6qJYr86PkAV3bXdLEbs=
-golang.org/x/oauth2 v0.23.0/go.mod h1:XYTD2NtWslqkgxebSiOHnXEap4TF09sJSc7H1sXbhtI=
-golang.org/x/sync v0.0.0-20190423024810-112230192c58/go.mod h1:RxMgew5VJxzue5/jJTE5uejpjVlOe/izrB70Jof72aM=
-golang.org/x/sync v0.0.0-20210220032951-036812b2e83c/go.mod h1:RxMgew5VJxzue5/jJTE5uejpjVlOe/izrB70Jof72aM=
-golang.org/x/sync v0.7.0 h1:YsImfSBoP9QPYL0xyKJPq0gcaJdG3rInoqxTWbfQu9M=
-golang.org/x/sync v0.7.0/go.mod h1:Czt+wKu1gCyEFDUtn0jG5QVvpJ6rzVqr5aXyt9drQfk=
-golang.org/x/sys v0.0.0-20190215142949-d0b11bdaac8a/go.mod h1:STP8DvDyc/dI5b8T5hshtkjS+E42TnysNCUPdjciGhY=
-golang.org/x/sys v0.0.0-20190412213103-97732733099d/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
-golang.org/x/sys v0.0.0-20201119102817-f84b799fce68/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
-golang.org/x/sys v0.0.0-20210330210617-4fbd30eecc44/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
-golang.org/x/sys v0.0.0-20210510120138-977fb7262007/go.mod h1:oPkhp1MJrh7nUepCBck5+mAzfO9JrbApNNgaTdGDITg=
-golang.org/x/sys v0.0.0-20220811171246-fbc7d0a398ab/go.mod h1:oPkhp1MJrh7nUepCBck5+mAzfO9JrbApNNgaTdGDITg=
-golang.org/x/sys v0.25.0 h1:r+8e+loiHxRqhXVl6ML1nO3l1+oFoWbnlu2Ehimmi34=
-golang.org/x/sys v0.25.0/go.mod h1:/VUhepiaJMQUp4+oa/7Zr1D23ma6VTLIYjOOTFZPUcA=
-golang.org/x/term v0.0.0-20201126162022-7de9c90e9dd1/go.mod h1:bj7SfCRtBDWHUb9snDiAeCFNEtKQo2Wmx5Cou7ajbmo=
-golang.org/x/text v0.3.0/go.mod h1:NqM8EUOU14njkJ3fqMW+pc6Ldnwhi/IjpwHt7yyuwOQ=
-golang.org/x/text v0.3.3/go.mod h1:5Zoc/QRtKVWzQhOtBMvqHzDpF6irO9z98xDceosuGiQ=
-golang.org/x/text v0.18.0 h1:XvMDiNzPAl0jr17s6W9lcaIhGUfUORdGCNsuLmPG224=
-golang.org/x/text v0.18.0/go.mod h1:BuEKDfySbSR4drPmRPG/7iBdf8hvFMuRexcpahXilzY=
-golang.org/x/tools v0.0.0-20180917221912-90fa682c2a6e/go.mod h1:n7NCudcB/nEzxVGmLbDWY5pfWTLqBcC2KZ6jyYvM4mQ=
-golang.org/x/tools v0.0.0-20191119224855-298f0cb1881e/go.mod h1:b+2E5dAYhXwXZwtnZ6UAqBI28+e2cm9otk0dWdXHAEo=
-golang.org/x/tools v0.1.1/go.mod h1:o0xws9oXOQQZyjljx8fwUC0k7L1pTE6eaCbjGeHmOkk=
-golang.org/x/tools v0.22.0 h1:gqSGLZqv+AI9lIQzniJ0nZDRG5GBPsSi+DRNHWNz6yA=
-golang.org/x/tools v0.22.0/go.mod h1:aCwcsjqvq7Yqt6TNyX7QMU2enbQ/Gt0bo6krSeEri+c=
-golang.org/x/xerrors v0.0.0-20190717185122-a985d3407aa7/go.mod h1:I/5z698sn9Ka8TeJc9MKroUUfqBBauWjQqLJ2OPfmY0=
-golang.org/x/xerrors v0.0.0-20191011141410-1b5146add898/go.mod h1:I/5z698sn9Ka8TeJc9MKroUUfqBBauWjQqLJ2OPfmY0=
-golang.org/x/xerrors v0.0.0-20200804184101-5ec99f83aff1/go.mod h1:I/5z698sn9Ka8TeJc9MKroUUfqBBauWjQqLJ2OPfmY0=
-google.golang.org/protobuf v1.34.1 h1:9ddQBjfCyZPOHPUiPxpYESBLc+T8P3E+Vo4IbKZgFWg=
-google.golang.org/protobuf v1.34.1/go.mod h1:c6P6GXX6sHbq/GpV6MGZEdwhWPcYBgnhAHhKbcUYpos=
+github.com/stretchr/testify v1.11.1 h1:7s2iGBzp5EwR7/aIZr8ao5+dra3wiQyKjjFuvgVKu7U=
+github.com/stretchr/testify v1.11.1/go.mod h1:wZwfW3scLgRK+23gO65QZefKpKQRnfz6sD981Nm4B6U=
+go.uber.org/mock v0.6.0 h1:hyF9dfmbgIX5EfOdasqLsWD6xqpNZlXblLB/Dbnwv3Y=
+go.uber.org/mock v0.6.0/go.mod h1:KiVJ4BqZJaMj4svdfmHM0AUx4NJYO8ZNpPnZn1Z+BBU=
+golang.org/x/exp v0.0.0-20251219203646-944ab1f22d93 h1:fQsdNF2N+/YewlRZiricy4P1iimyPKZ/xwniHj8Q2a0=
+golang.org/x/exp v0.0.0-20251219203646-944ab1f22d93/go.mod h1:EPRbTFwzwjXj9NpYyyrvenVh9Y+GFeEvMNh7Xuz7xgU=
+golang.org/x/mod v0.35.0 h1:Ww1D637e6Pg+Zb2KrWfHQUnH2dQRLBQyAtpr/haaJeM=
+golang.org/x/mod v0.35.0/go.mod h1:+GwiRhIInF8wPm+4AoT6L0FA1QWAad3OMdTRx4tFYlU=
+golang.org/x/net v0.53.0 h1:d+qAbo5L0orcWAr0a9JweQpjXF19LMXJE8Ey7hwOdUA=
+golang.org/x/net v0.53.0/go.mod h1:JvMuJH7rrdiCfbeHoo3fCQU24Lf5JJwT9W3sJFulfgs=
+golang.org/x/oauth2 v0.36.0 h1:peZ/1z27fi9hUOFCAZaHyrpWG5lwe0RJEEEeH0ThlIs=
+golang.org/x/oauth2 v0.36.0/go.mod h1:YDBUJMTkDnJS+A4BP4eZBjCqtokkg1hODuPjwiGPO7Q=
+golang.org/x/sync v0.20.0 h1:e0PTpb7pjO8GAtTs2dQ6jYa5BWYlMuX047Dco/pItO4=
+golang.org/x/sync v0.20.0/go.mod h1:9xrNwdLfx4jkKbNva9FpL6vEN7evnE43NNNJQ2LF3+0=
+golang.org/x/sys v0.6.0/go.mod h1:oPkhp1MJrh7nUepCBck5+mAzfO9JrbApNNgaTdGDITg=
+golang.org/x/sys v0.43.0 h1:Rlag2XtaFTxp19wS8MXlJwTvoh8ArU6ezoyFsMyCTNI=
+golang.org/x/sys v0.43.0/go.mod h1:4GL1E5IUh+htKOUEOaiffhrAeqysfVGipDYzABqnCmw=
+golang.org/x/text v0.36.0 h1:JfKh3XmcRPqZPKevfXVpI1wXPTqbkE5f7JA92a55Yxg=
+golang.org/x/text v0.36.0/go.mod h1:NIdBknypM8iqVmPiuco0Dh6P5Jcdk8lJL0CUebqK164=
+golang.org/x/tools v0.43.0 h1:12BdW9CeB3Z+J/I/wj34VMl8X+fEXBxVR90JeMX5E7s=
+golang.org/x/tools v0.43.0/go.mod h1:uHkMso649BX2cZK6+RpuIPXS3ho2hZo4FVwfoy1vIk0=
+google.golang.org/protobuf v1.36.11 h1:fV6ZwhNocDyBLK0dj+fg8ektcVegBBuEolpbTQyBNVE=
+google.golang.org/protobuf v1.36.11/go.mod h1:HTf+CrKn2C3g5S8VImy6tdcUvCska2kB7j23XfzDpco=
 gopkg.in/check.v1 v0.0.0-20161208181325-20d25e280405 h1:yhCVgyC4o1eVCa2tZl7eS0r+SDo693bJlVdllGtEeKM=
 gopkg.in/check.v1 v0.0.0-20161208181325-20d25e280405/go.mod h1:Co6ibVJAznAaIkqp8huTwlJQCZ016jof/cbN4VW5Yz0=
 gopkg.in/yaml.v3 v3.0.1 h1:fxVm/GzAzEWqLHuvctI91KS9hhNmmWOoWu0XTYJS7CA=
 gopkg.in/yaml.v3 v3.0.1/go.mod h1:K4uyk7z7BCEPqu6E+C64Yfv1cQ7kz7rIZviUmN+EgEM=
-kernel.org/pub/linux/libs/security/libcap/cap v1.2.69 h1:N0m3tKYbkRMmDobh/47ngz+AWeV7PcfXMDi8xu3Vrag=
-kernel.org/pub/linux/libs/security/libcap/cap v1.2.69/go.mod h1:Tk5Ip2TuxaWGpccL7//rAsLRH6RQ/jfqTGxuN/+i/FQ=
-kernel.org/pub/linux/libs/security/libcap/psx v1.2.69 h1:IdrOs1ZgwGw5CI+BH6GgVVlOt+LAXoPyh7enr8lfaXs=
-kernel.org/pub/linux/libs/security/libcap/psx v1.2.69/go.mod h1:+l6Ee2F59XiJ2I6WR5ObpC1utCQJZ/VLsEbQCD8RG24=
+kernel.org/pub/linux/libs/security/libcap/cap v1.2.77 h1:iQtQTjFUOcTT19fI8sTCzYXsjeVs56et3D8AbKS2Uks=
+kernel.org/pub/linux/libs/security/libcap/cap v1.2.77/go.mod h1:oV+IO8kGh0B7TxErbydDe2+BRmi9g/W0CkpVV+QBTJU=
+kernel.org/pub/linux/libs/security/libcap/psx v1.2.77 h1:Z06sMOzc0GNCwp6efaVrIrz4ywGJ1v+DP0pjVkOfDuA=
+kernel.org/pub/linux/libs/security/libcap/psx v1.2.77/go.mod h1:+l6Ee2F59XiJ2I6WR5ObpC1utCQJZ/VLsEbQCD8RG24=

internal/backup/service.go

@@ -20,7 +20,8 @@ type Service struct {
 }
 
 func New(backupPeriod time.Duration,
-	dataDir, outputDir string, logger Logger) *Service {
+	dataDir, outputDir string, logger Logger,
+) *Service {
 	return &Service{
 		logger:       logger,
 		backupPeriod: backupPeriod,
@@ -56,7 +57,8 @@ func (s *Service) Start(ctx context.Context) (runError <-chan error, startErr er
 
 func run(ready chan<- struct{}, runError chan<- error, stopCh <-chan struct{},
 	done chan<- struct{}, outputDir, dataDir string, backupPeriod time.Duration,
-	logger Logger) {
+	logger Logger,
+) {
 	defer close(done)
 
 	if backupPeriod == 0 {

internal/config/health.go

@@ -12,21 +12,26 @@ import (
 )
 
 type Health struct {
+	// ServerAddress is the listening address:port of the
+	// health server, which defaults to the empty string,
+	// meaning the server will not run.
 	ServerAddress         *string
 	HealthchecksioBaseURL string
 	HealthchecksioUUID    *string
 }
 
 func (h *Health) SetDefaults() {
-	h.ServerAddress = gosettings.DefaultPointer(h.ServerAddress, "127.0.0.1:9999")
+	h.ServerAddress = gosettings.DefaultPointer(h.ServerAddress, "")
 	h.HealthchecksioBaseURL = gosettings.DefaultComparable(h.HealthchecksioBaseURL, "https://hc-ping.com")
 	h.HealthchecksioUUID = gosettings.DefaultPointer(h.HealthchecksioUUID, "")
 }
 
 func (h Health) Validate() (err error) {
-	err = validate.ListeningAddress(*h.ServerAddress, os.Getuid())
-	if err != nil {
-		return fmt.Errorf("server listening address: %w", err)
+	if *h.ServerAddress != "" {
+		err = validate.ListeningAddress(*h.ServerAddress, os.Getuid())
+		if err != nil {
+			return fmt.Errorf("server listening address: %w", err)
+		}
 	}
 
 	_, err = url.Parse(h.HealthchecksioBaseURL)
@@ -43,7 +48,11 @@ func (h Health) String() string {
 
 func (h Health) toLinesNode() *gotree.Node {
 	node := gotree.New("Health")
-	node.Appendf("Server listening address: %s", *h.ServerAddress)
+	if *h.ServerAddress == "" {
+		node.Appendf("Server is disabled")
+	} else {
+		node.Appendf("Server listening address: %s", *h.ServerAddress)
+	}
 	if *h.HealthchecksioUUID != "" {
 		node.Appendf("Healthchecks.io base URL: %s", h.HealthchecksioBaseURL)
 		node.Appendf("Healthchecks.io UUID: %s", *h.HealthchecksioUUID)

internal/config/paths_test.go

@@ -30,7 +30,6 @@ func Test_parseUmask(t *testing.T) {
 	}
 
 	for name, testCase := range testCases {
-		testCase := testCase
 		t.Run(name, func(t *testing.T) {
 			t.Parallel()
 

internal/config/pubip.go

@@ -70,28 +70,28 @@ func (p *PubIP) toLinesNode() (node *gotree.Node) {
 
 	node.Appendf("HTTP enabled: %s", gosettings.BoolToYesNo(p.HTTPEnabled))
 	if *p.HTTPEnabled {
-		childNode := node.Appendf("HTTP IP providers")
+		childNode := node.Append("HTTP IP providers")
 		for _, provider := range p.HTTPIPProviders {
-			childNode.Appendf(provider)
+			childNode.Append(provider)
 		}
 
-		childNode = node.Appendf("HTTP IPv4 providers")
+		childNode = node.Append("HTTP IPv4 providers")
 		for _, provider := range p.HTTPIPv4Providers {
-			childNode.Appendf(provider)
+			childNode.Append(provider)
 		}
 
-		childNode = node.Appendf("HTTP IPv6 providers")
+		childNode = node.Append("HTTP IPv6 providers")
 		for _, provider := range p.HTTPIPv6Providers {
-			childNode.Appendf(provider)
+			childNode.Append(provider)
 		}
 	}
 
 	node.Appendf("DNS enabled: %s", gosettings.BoolToYesNo(p.DNSEnabled))
 	if *p.DNSEnabled {
 		node.Appendf("DNS timeout: %s", p.DNSTimeout)
-		childNode := node.Appendf("DNS over TLS providers")
+		childNode := node.Append("DNS over TLS providers")
 		for _, provider := range p.DNSProviders {
-			childNode.Appendf(provider)
+			childNode.Append(provider)
 		}
 	}
 
@@ -111,7 +111,8 @@ func (p *PubIP) ToHTTPOptions() (options []http.Option) {
 }
 
 func stringsToHTTPProviders(providers []string, ipVersion ipversion.IPVersion) (
-	updatedProviders []http.Provider) {
+	updatedProviders []http.Provider,
+) {
 	updatedProvidersSet := make(map[string]struct{}, len(providers))
 	for _, provider := range providers {
 		if provider != all {
@@ -158,9 +159,7 @@ func (p *PubIP) ToDNSPOptions() (options []dns.Option) {
 	}
 }
 
-var (
-	ErrNoPublicIPDNSProvider = errors.New("no public IP DNS provider specified")
-)
+var ErrNoPublicIPDNSProvider = errors.New("no public IP DNS provider specified")
 
 func (p PubIP) validateDNSProviders() (err error) {
 	if len(p.DNSProviders) == 0 {
@@ -194,7 +193,8 @@ var (
 )
 
 func validateHTTPIPProviders(providerStrings []string,
-	version ipversion.IPVersion) (err error) {
+	version ipversion.IPVersion,
+) (err error) {
 	if len(providerStrings) == 0 {
 		return fmt.Errorf("%w", ErrNoPublicIPHTTPProvider)
 	}

internal/config/retrocompat.go

@@ -1,7 +1,7 @@
 package config
 
 type Warner interface {
-	Warnf(format string, a ...interface{})
+	Warnf(format string, a ...any)
 }
 
 func handleDeprecated(warner Warner, oldKey, newKey string) {

internal/config/settings.go

@@ -80,7 +80,8 @@ func (c Config) toLinesNode() *gotree.Node {
 }
 
 func (c *Config) Read(reader *reader.Reader,
-	warner Warner) (err error) {
+	warner Warner,
+) (err error) {
 	err = c.Client.read(reader)
 	if err != nil {
 		return fmt.Errorf("reading client settings: %w", err)

internal/config/settings_test.go

@@ -1,6 +1,7 @@
 package config
 
 import (
+	"path/filepath"
 	"testing"
 
 	"github.com/stretchr/testify/assert"
@@ -14,7 +15,7 @@ func Test_Settings_String(t *testing.T) {
 
 	s := defaultSettings.String()
 
-	const expected = `Settings summary:
+	expected := `Settings summary:
 ├── HTTP client
 |   └── Timeout: 20s
 ├── Update
@@ -37,10 +38,10 @@ func Test_Settings_String(t *testing.T) {
 |   ├── Listening address: :8000
 |   └── Root URL: /
 ├── Health
-|   └── Server listening address: 127.0.0.1:9999
+|   └── Server is disabled
 ├── Paths
 |   ├── Data directory: ./data
-|   ├── Config file: data/config.json
+|   ├── Config file: ` + filepath.Join("data", "config.json") + `
 |   └── Umask: system default
 ├── Backup: disabled
 └── Logger

internal/config/shoutrrr.go

@@ -43,7 +43,7 @@ func (s Shoutrrr) ToLinesNode() *gotree.Node {
 
 	childNode := node.Appendf("Addresses")
 	for _, address := range s.Addresses {
-		childNode.Appendf(address)
+		childNode.Append(address)
 	}
 
 	return node

internal/data/memory.go

@@ -12,7 +12,7 @@ var ErrRecordNotFound = errors.New("record not found")
 func (db *Database) Select(id uint) (record records.Record, err error) {
 	db.RLock()
 	defer db.RUnlock()
-	if int(id) > len(db.data)-1 {
+	if id > uint(len(db.data))-1 {
 		return record, fmt.Errorf("%w: for id %d", ErrRecordNotFound, id)
 	}
 	return db.data[id], nil

internal/data/persistence.go

@@ -9,7 +9,7 @@ import (
 func (db *Database) Update(id uint, record records.Record) (err error) {
 	db.Lock()
 	defer db.Unlock()
-	if int(id) > len(db.data)-1 {
+	if id > uint(len(db.data))-1 {
 		return fmt.Errorf("%w: for id %d", ErrRecordNotFound, id)
 	}
 	currentCount := len(db.data[id].History)

internal/health/httpcheck.go

@@ -7,9 +7,7 @@ import (
 	"net/http"
 )
 
-var (
-	ErrHTTPStatusCodeNotOK = errors.New("status code is not OK")
-)
+var ErrHTTPStatusCodeNotOK = errors.New("status code is not OK")
 
 func CheckHTTP(ctx context.Context, client *http.Client) (err error) {
 	const url = "https://github.com"

internal/health/isdocker.go

@@ -1,8 +0,0 @@
-package health
-
-import "os"
-
-func IsDocker() (ok bool) {
-	_, err := os.Stat("isdocker")
-	return err == nil
-}

internal/health/server.go

@@ -7,7 +7,8 @@ import (
 )
 
 func NewServer(address string, logger Logger, healthcheck func(context.Context) error) (
-	server *httpserver.Server, err error) {
+	server *httpserver.Server, err error,
+) {
 	name := "health"
 	return httpserver.New(httpserver.Settings{
 		Handler: newHandler(healthcheck),

internal/healthchecksio/healthchecksio.go

@@ -23,9 +23,7 @@ type Client struct {
 	uuid       string
 }
 
-var (
-	ErrStatusCode = errors.New("bad status code")
-)
+var ErrStatusCode = errors.New("bad status code")
 
 type State string
 

internal/models/history.go

@@ -23,7 +23,7 @@ func (h History) GetPreviousIPs() (previousIPs []netip.Addr) {
 		return nil
 	}
 	previousIPs = make([]netip.Addr, len(h)-1)
-	mostRecentPreviousIPIndex := len(h) - 2 //nolint:gomnd
+	mostRecentPreviousIPIndex := len(h) - 2 //nolint:mnd
 	for i := range previousIPs {
 		previousIPs[i] = h[mostRecentPreviousIPIndex-i].IP
 	}

internal/models/history_test.go

@@ -44,7 +44,6 @@ func Test_GetPreviousIPs(t *testing.T) {
 		},
 	}
 	for name, testCase := range testCases {
-		testCase := testCase
 		t.Run(name, func(t *testing.T) {
 			t.Parallel()
 			previousIPs := testCase.h.GetPreviousIPs()
@@ -73,7 +72,6 @@ func Test_GetDurationSinceSuccess(t *testing.T) {
 		},
 	}
 	for name, tc := range tests {
-		tc := tc
 		t.Run(name, func(t *testing.T) {
 			t.Parallel()
 			now, _ := time.Parse("2006-01-02", "2000-01-01")

internal/params/json.go

@@ -12,6 +12,7 @@ import (
 
 	"github.com/qdm12/ddns-updater/internal/models"
 	"github.com/qdm12/ddns-updater/internal/provider"
+	"github.com/qdm12/ddns-updater/internal/provider/constants"
 	"github.com/qdm12/ddns-updater/internal/provider/utils"
 	"github.com/qdm12/ddns-updater/pkg/publicip/ipversion"
 	"golang.org/x/net/publicsuffix"
@@ -26,7 +27,7 @@ type commonSettings struct {
 	// Domain field.
 	Owner      string       `json:"owner,omitempty"`
 	IPVersion  string       `json:"ip_version"`
-	IPv6Suffix netip.Prefix `json:"ipv6_suffix,omitempty"`
+	IPv6Suffix netip.Prefix `json:"ipv6_suffix"`
 	// Retro values for warnings
 	ProviderIP *bool `json:"provider_ip,omitempty"`
 }
@@ -35,7 +36,8 @@ type commonSettings struct {
 // first trying from the environment variable CONFIG and then from
 // the file config.json.
 func (r *Reader) JSONProviders(filePath string) (
-	providers []provider.Provider, warnings []string, err error) {
+	providers []provider.Provider, warnings []string, err error,
+) {
 	providers, warnings, err = r.getProvidersFromEnv(filePath)
 	if providers != nil || warnings != nil || err != nil {
 		return providers, warnings, err
@@ -47,7 +49,8 @@ var errWriteConfigToFile = errors.New("cannot write configuration to file")
 
 // getProvidersFromFile obtain the update settings from config.json.
 func (r *Reader) getProvidersFromFile(filePath string) (
-	providers []provider.Provider, warnings []string, err error) {
+	providers []provider.Provider, warnings []string, err error,
+) {
 	r.logger.Info("reading JSON config from file " + filePath)
 	bytes, err := r.readFile(filePath)
 	if err != nil {
@@ -72,7 +75,8 @@ func (r *Reader) getProvidersFromFile(filePath string) (
 // getProvidersFromEnv obtain the update settings from the environment variable CONFIG.
 // If the settings are valid, they are written to the filePath.
 func (r *Reader) getProvidersFromEnv(filePath string) (
-	providers []provider.Provider, warnings []string, err error) {
+	providers []provider.Provider, warnings []string, err error,
+) {
 	s := os.Getenv("CONFIG")
 	if s == "" {
 		return nil, nil, nil
@@ -107,7 +111,8 @@ var (
 )
 
 func extractAllSettings(jsonBytes []byte) (
-	allProviders []provider.Provider, warnings []string, err error) {
+	allProviders []provider.Provider, warnings []string, err error,
+) {
 	config := struct {
 		CommonSettings []commonSettings `json:"settings"`
 	}{}
@@ -143,11 +148,13 @@ func extractAllSettings(jsonBytes []byte) (
 
 var (
 	ErrProviderNoLongerSupported = errors.New("provider no longer supported")
+	ErrProviderMultipleDomains   = errors.New("provider does not support multiple domains")
 )
 
 func makeSettingsFromObject(common commonSettings, rawSettings json.RawMessage,
 	retroGlobalIPv6Suffix netip.Prefix) (
-	providers []provider.Provider, warnings []string, err error) {
+	providers []provider.Provider, warnings []string, err error,
+) {
 	if common.Provider == "google" {
 		return nil, nil, fmt.Errorf("%w: %s", ErrProviderNoLongerSupported, common.Provider)
 	}
@@ -175,6 +182,11 @@ func makeSettingsFromObject(common commonSettings, rawSettings json.RawMessage,
 		}
 	}
 
+	if common.Provider == string(constants.Myaddr) && len(owners) > 1 {
+		return nil, nil, fmt.Errorf("%w: %s for parent domain %q",
+			ErrProviderMultipleDomains, common.Provider, domain)
+	}
+
 	if common.IPVersion == "" {
 		common.IPVersion = ipversion.IP4or6.String()
 	}
@@ -202,6 +214,11 @@ func makeSettingsFromObject(common commonSettings, rawSettings json.RawMessage,
 	}
 
 	providerName := models.Provider(common.Provider)
+	if providerName == constants.Hetzner {
+		warnings = append(warnings,
+			"You should use the hetznercloud with the new Hetzner Cloud console instead, "+
+				"given this legacy Hetzner API is going to be shutdown soon.")
+	}
 	providers = make([]provider.Provider, len(owners))
 	for i, owner := range owners {
 		owner = strings.TrimSpace(owner)
@@ -214,12 +231,11 @@ func makeSettingsFromObject(common commonSettings, rawSettings json.RawMessage,
 	return providers, warnings, nil
 }
 
-var (
-	ErrMultipleDomainsSpecified = errors.New("multiple domains specified")
-)
+var ErrMultipleDomainsSpecified = errors.New("multiple domains specified")
 
 func extractFromDomainField(domainField string) (domainRegistered string,
-	owners []string, err error) {
+	owners []string, err error,
+) {
 	domains := strings.Split(domainField, ",")
 	owners = make([]string, len(domains))
 	for i, domain := range domains {

internal/params/json_test.go

@@ -59,7 +59,6 @@ func Test_extractFromDomainField(t *testing.T) {
 	}
 
 	for name, testCase := range testCases {
-		testCase := testCase
 		t.Run(name, func(t *testing.T) {
 			t.Parallel()
 

internal/params/retro.go

@@ -18,9 +18,7 @@ func getRetroIPv6Suffix() (suffix netip.Prefix, err error) {
 	return makeIPv6Suffix(prefixBitsString)
 }
 
-var (
-	ErrIPv6PrefixFormat = errors.New("IPv6 prefix format is incorrect")
-)
+var ErrIPv6PrefixFormat = errors.New("IPv6 prefix format is incorrect")
 
 func makeIPv6Suffix(prefixBitsString string) (suffix netip.Prefix, err error) {
 	prefixBitsString = strings.TrimPrefix(prefixBitsString, "/")

internal/params/retro_test.go

@@ -46,7 +46,6 @@ func Test_makeIPv6Suffix(t *testing.T) {
 	}
 
 	for name, testCase := range testCases {
-		testCase := testCase
 		t.Run(name, func(t *testing.T) {
 			t.Parallel()
 

internal/persistence/json/queries.go

@@ -42,7 +42,8 @@ func (db *Database) StoreNewIP(domain, owner string, ip netip.Addr, t time.Time)
 // GetEvents gets all the IP addresses history for a certain domain, owner and
 // IP version, in the order from oldest to newest.
 func (db *Database) GetEvents(domain, owner string,
-	ipVersion ipversion.IPVersion) (events []models.HistoryEvent, err error) {
+	ipVersion ipversion.IPVersion,
+) (events []models.HistoryEvent, err error) {
 	db.mutex.RLock()
 	defer db.mutex.RUnlock()
 	for _, record := range db.data.Records {

internal/provider/constants/providers.go

@@ -15,6 +15,7 @@ const (
 	DigitalOcean models.Provider = "digitalocean"
 	DNSOMatic    models.Provider = "dnsomatic"
 	DNSPod       models.Provider = "dnspod"
+	Domeneshop   models.Provider = "domeneshop"
 	DonDominio   models.Provider = "dondominio"
 	Dreamhost    models.Provider = "dreamhost"
 	DuckDNS      models.Provider = "duckdns"
@@ -30,13 +31,18 @@ const (
 	GoIP         models.Provider = "goip"
 	HE           models.Provider = "he"
 	Hetzner      models.Provider = "hetzner"
+	HetznerCloud models.Provider = "hetznercloud"
 	Infomaniak   models.Provider = "infomaniak"
 	INWX         models.Provider = "inwx"
 	Ionos        models.Provider = "ionos"
+	IPv64        models.Provider = "ipv64"
 	Linode       models.Provider = "linode"
+	Loopia       models.Provider = "loopia"
 	LuaDNS       models.Provider = "luadns"
+	Myaddr       models.Provider = "myaddr"
 	Namecheap    models.Provider = "namecheap"
 	NameCom      models.Provider = "name.com"
+	NameSilo     models.Provider = "namesilo"
 	Netcup       models.Provider = "netcup"
 	Njalla       models.Provider = "njalla"
 	NoIP         models.Provider = "noip"
@@ -45,11 +51,14 @@ const (
 	OVH          models.Provider = "ovh"
 	Porkbun      models.Provider = "porkbun"
 	Route53      models.Provider = "route53"
+	Scaleway     models.Provider = "scaleway"
 	SelfhostDe   models.Provider = "selfhost.de"
 	Servercow    models.Provider = "servercow"
 	Spdyn        models.Provider = "spdyn"
 	Strato       models.Provider = "strato"
 	Variomedia   models.Provider = "variomedia"
+	Vercel       models.Provider = "vercel"
+	Vultr        models.Provider = "vultr"
 	Zoneedit     models.Provider = "zoneedit"
 )
 
@@ -65,6 +74,7 @@ func ProviderChoices() []models.Provider {
 		DigitalOcean,
 		DNSOMatic,
 		DNSPod,
+		Domeneshop,
 		DonDominio,
 		Dreamhost,
 		DuckDNS,
@@ -80,13 +90,18 @@ func ProviderChoices() []models.Provider {
 		GoIP,
 		HE,
 		Hetzner,
+		HetznerCloud,
 		Infomaniak,
 		INWX,
 		Ionos,
+		IPv64,
 		Linode,
+		Loopia,
 		LuaDNS,
+		Myaddr,
 		Namecheap,
 		NameCom,
+		NameSilo,
 		Njalla,
 		NoIP,
 		NowDNS,
@@ -94,10 +109,13 @@ func ProviderChoices() []models.Provider {
 		OVH,
 		Porkbun,
 		Route53,
+		Scaleway,
 		SelfhostDe,
 		Spdyn,
 		Strato,
 		Variomedia,
+		Vercel,
+		Vultr,
 		Zoneedit,
 	}
 }

internal/provider/errors/validation.go

@@ -18,10 +18,7 @@ var (
 	ErrEmailNotValid          = errors.New("email address is not valid")
 	ErrGCPProjectNotSet       = errors.New("GCP project is not set")
 	ErrDomainNotValid         = errors.New("domain is not valid")
-	ErrOwnerNotSet            = errors.New("owner is not set")
 	ErrOwnerWildcard          = errors.New(`owner cannot be "*"`)
-	ErrIPv4KeyNotSet          = errors.New("IPv4 key is not set")
-	ErrIPv6KeyNotSet          = errors.New("IPv6 key is not set")
 	ErrKeyNotSet              = errors.New("key is not set")
 	ErrKeyNotValid            = errors.New("key is not valid")
 	ErrPasswordNotSet         = errors.New("password is not set")
@@ -33,6 +30,7 @@ var (
 	ErrTokenNotValid          = errors.New("token is not valid")
 	ErrTTLNotSet              = errors.New("TTL is not set")
 	ErrTTLTooLow              = errors.New("TTL is too low")
+	ErrTTLTooHigh             = errors.New("TTL is too high")
 	ErrURLNotHTTPS            = errors.New("url is not https")
 	ErrURLNotSet              = errors.New("url is not set")
 	ErrUsernameNotSet         = errors.New("username is not set")

internal/provider/headers/headers.go

@@ -23,13 +23,17 @@ func SetAuthSSOKey(request *http.Request, key, secret string) {
 }
 
 func SetOauth(request *http.Request, value string) {
-	request.Header.Set("oauth", value)
+	request.Header.Set("Oauth", value)
 }
 
 func SetXFilter(request *http.Request, value string) {
 	request.Header.Set("X-Filter", value)
 }
 
+func SetXAuthToken(request *http.Request, value string) {
+	request.Header.Set("X-Auth-Token", value)
+}
+
 func SetXAuthUsername(request *http.Request, value string) {
 	request.Header.Set("X-Auth-Username", value)
 }
@@ -39,5 +43,5 @@ func SetXAuthPassword(request *http.Request, value string) {
 }
 
 func SetXAPIKey(request *http.Request, value string) {
-	request.Header.Set("X-API-Key", value)
+	request.Header.Set("X-Api-Key", value)
 }

internal/provider/provider.go

@@ -21,6 +21,7 @@ import (
 	"github.com/qdm12/ddns-updater/internal/provider/providers/digitalocean"
 	"github.com/qdm12/ddns-updater/internal/provider/providers/dnsomatic"
 	"github.com/qdm12/ddns-updater/internal/provider/providers/dnspod"
+	"github.com/qdm12/ddns-updater/internal/provider/providers/domeneshop"
 	"github.com/qdm12/ddns-updater/internal/provider/providers/dondominio"
 	"github.com/qdm12/ddns-updater/internal/provider/providers/dreamhost"
 	"github.com/qdm12/ddns-updater/internal/provider/providers/duckdns"
@@ -36,13 +37,18 @@ import (
 	"github.com/qdm12/ddns-updater/internal/provider/providers/goip"
 	"github.com/qdm12/ddns-updater/internal/provider/providers/he"
 	"github.com/qdm12/ddns-updater/internal/provider/providers/hetzner"
+	"github.com/qdm12/ddns-updater/internal/provider/providers/hetznercloud"
 	"github.com/qdm12/ddns-updater/internal/provider/providers/infomaniak"
 	"github.com/qdm12/ddns-updater/internal/provider/providers/inwx"
 	"github.com/qdm12/ddns-updater/internal/provider/providers/ionos"
+	"github.com/qdm12/ddns-updater/internal/provider/providers/ipv64"
 	"github.com/qdm12/ddns-updater/internal/provider/providers/linode"
+	"github.com/qdm12/ddns-updater/internal/provider/providers/loopia"
 	"github.com/qdm12/ddns-updater/internal/provider/providers/luadns"
+	"github.com/qdm12/ddns-updater/internal/provider/providers/myaddr"
 	"github.com/qdm12/ddns-updater/internal/provider/providers/namecheap"
 	"github.com/qdm12/ddns-updater/internal/provider/providers/namecom"
+	"github.com/qdm12/ddns-updater/internal/provider/providers/namesilo"
 	"github.com/qdm12/ddns-updater/internal/provider/providers/netcup"
 	"github.com/qdm12/ddns-updater/internal/provider/providers/njalla"
 	"github.com/qdm12/ddns-updater/internal/provider/providers/noip"
@@ -51,11 +57,14 @@ import (
 	"github.com/qdm12/ddns-updater/internal/provider/providers/ovh"
 	"github.com/qdm12/ddns-updater/internal/provider/providers/porkbun"
 	"github.com/qdm12/ddns-updater/internal/provider/providers/route53"
+	"github.com/qdm12/ddns-updater/internal/provider/providers/scaleway"
 	"github.com/qdm12/ddns-updater/internal/provider/providers/selfhostde"
 	"github.com/qdm12/ddns-updater/internal/provider/providers/servercow"
 	"github.com/qdm12/ddns-updater/internal/provider/providers/spdyn"
 	"github.com/qdm12/ddns-updater/internal/provider/providers/strato"
 	"github.com/qdm12/ddns-updater/internal/provider/providers/variomedia"
+	"github.com/qdm12/ddns-updater/internal/provider/providers/vercel"
+	"github.com/qdm12/ddns-updater/internal/provider/providers/vultr"
 	"github.com/qdm12/ddns-updater/internal/provider/providers/zoneedit"
 	"github.com/qdm12/ddns-updater/pkg/publicip/ipversion"
 )
@@ -76,7 +85,8 @@ var ErrProviderUnknown = errors.New("unknown provider")
 
 //nolint:gocyclo
 func New(providerName models.Provider, data json.RawMessage, domain, owner string, //nolint:ireturn
-	ipVersion ipversion.IPVersion, ipv6Suffix netip.Prefix) (provider Provider, err error) {
+	ipVersion ipversion.IPVersion, ipv6Suffix netip.Prefix,
+) (provider Provider, err error) {
 	switch providerName {
 	case constants.Aliyun:
 		return aliyun.New(data, domain, owner, ipVersion, ipv6Suffix)
@@ -100,6 +110,8 @@ func New(providerName models.Provider, data json.RawMessage, domain, owner strin
 		return dnsomatic.New(data, domain, owner, ipVersion, ipv6Suffix)
 	case constants.DNSPod:
 		return dnspod.New(data, domain, owner, ipVersion, ipv6Suffix)
+	case constants.Domeneshop:
+		return domeneshop.New(data, domain, owner, ipVersion, ipv6Suffix)
 	case constants.DonDominio:
 		return dondominio.New(data, domain, owner, ipVersion, ipv6Suffix)
 	case constants.Dreamhost:
@@ -130,20 +142,30 @@ func New(providerName models.Provider, data json.RawMessage, domain, owner strin
 		return he.New(data, domain, owner, ipVersion, ipv6Suffix)
 	case constants.Hetzner:
 		return hetzner.New(data, domain, owner, ipVersion, ipv6Suffix)
+	case constants.HetznerCloud:
+		return hetznercloud.New(data, domain, owner, ipVersion, ipv6Suffix)
 	case constants.Infomaniak:
 		return infomaniak.New(data, domain, owner, ipVersion, ipv6Suffix)
 	case constants.INWX:
 		return inwx.New(data, domain, owner, ipVersion, ipv6Suffix)
 	case constants.Ionos:
 		return ionos.New(data, domain, owner, ipVersion, ipv6Suffix)
+	case constants.IPv64:
+		return ipv64.New(data, domain, owner, ipVersion, ipv6Suffix)
 	case constants.Linode:
 		return linode.New(data, domain, owner, ipVersion, ipv6Suffix)
+	case constants.Loopia:
+		return loopia.New(data, domain, owner, ipVersion, ipv6Suffix)
 	case constants.LuaDNS:
 		return luadns.New(data, domain, owner, ipVersion, ipv6Suffix)
+	case constants.Myaddr:
+		return myaddr.New(data, domain, owner, ipVersion, ipv6Suffix)
 	case constants.Namecheap:
 		return namecheap.New(data, domain, owner)
 	case constants.NameCom:
 		return namecom.New(data, domain, owner, ipVersion, ipv6Suffix)
+	case constants.NameSilo:
+		return namesilo.New(data, domain, owner, ipVersion, ipv6Suffix)
 	case constants.Netcup:
 		return netcup.New(data, domain, owner, ipVersion, ipv6Suffix)
 	case constants.Njalla:
@@ -160,6 +182,8 @@ func New(providerName models.Provider, data json.RawMessage, domain, owner strin
 		return porkbun.New(data, domain, owner, ipVersion, ipv6Suffix)
 	case constants.Route53:
 		return route53.New(data, domain, owner, ipVersion, ipv6Suffix)
+	case constants.Scaleway:
+		return scaleway.New(data, domain, owner, ipVersion, ipv6Suffix)
 	case constants.SelfhostDe:
 		return selfhostde.New(data, domain, owner, ipVersion, ipv6Suffix)
 	case constants.Servercow:
@@ -170,6 +194,10 @@ func New(providerName models.Provider, data json.RawMessage, domain, owner strin
 		return strato.New(data, domain, owner, ipVersion, ipv6Suffix)
 	case constants.Variomedia:
 		return variomedia.New(data, domain, owner, ipVersion, ipv6Suffix)
+	case constants.Vercel:
+		return vercel.New(data, domain, owner, ipVersion, ipv6Suffix)
+	case constants.Vultr:
+		return vultr.New(data, domain, owner, ipVersion, ipv6Suffix)
 	case constants.Zoneedit:
 		return zoneedit.New(data, domain, owner, ipVersion, ipv6Suffix)
 	default:

internal/provider/providers/aliyun/common.go

@@ -12,9 +12,9 @@ import (
 )
 
 func newURLValues(accessKeyID string) (values url.Values) {
-	randBytes := make([]byte, 8) //nolint:gomnd
+	randBytes := make([]byte, 8) //nolint:mnd
 	_, _ = rand.Read(randBytes)
-	randInt64 := int64(binary.BigEndian.Uint64(randBytes))
+	randInt64 := int64(binary.BigEndian.Uint64(randBytes)) //nolint:gosec
 
 	values = make(url.Values)
 	values.Set("AccessKeyId", accessKeyID)

internal/provider/providers/aliyun/create.go

@@ -14,7 +14,8 @@ import (
 )
 
 func (p *Provider) createRecord(ctx context.Context,
-	client *http.Client, ip netip.Addr) (recordID string, err error) {
+	client *http.Client, ip netip.Addr,
+) (recordID string, err error) {
 	recordType := constants.A
 	if ip.Is6() {
 		recordType = constants.AAAA

internal/provider/providers/aliyun/getrecord.go

@@ -13,7 +13,8 @@ import (
 )
 
 func (p *Provider) getRecordID(ctx context.Context, client *http.Client,
-	recordType string) (recordID string, err error) {
+	recordType string,
+) (recordID string, err error) {
 	u := &url.URL{
 		Scheme: "https",
 		Host:   "dns.aliyuncs.com",

internal/provider/providers/aliyun/provider.go

@@ -27,7 +27,8 @@ type Provider struct {
 
 func New(data json.RawMessage, domain, owner string,
 	ipVersion ipversion.IPVersion, ipv6Suffix netip.Prefix) (
-	p *Provider, err error) {
+	p *Provider, err error,
+) {
 	extraSettings := struct {
 		AccessKeyID  string `json:"access_key_id"`
 		AccessSecret string `json:"access_secret"`

internal/provider/providers/aliyun/update.go

@@ -13,7 +13,8 @@ import (
 )
 
 func (p *Provider) updateRecord(ctx context.Context, client *http.Client,
-	recordID string, ip netip.Addr) (err error) {
+	recordID string, ip netip.Addr,
+) (err error) {
 	recordType := constants.A
 	if ip.Is6() {
 		recordType = constants.AAAA